Title - Draft analysis of switch bezel Objective - To learn draft analysis of class A surface of Switch bezel, forming plastic structure and creating solid surface. Introduction - In this project we will learn step by step process of draft analysis of switch bezel and creating solid model by class A surface.……

COIN HOLDER DESIGN  Tree structure Surface sets and Closed solid surface Publications Class A surface After examining the input surfaces, most of the faces are at 90 degree with the base. And we ourselves cannot edit or give draft to those faces. So a line perpendicular to the base.   Class A surface:It provides…

AIM: To make a model from the provided class-A surface. BUMPER DESIGN AIM: to make a model from the provided class-A surface.INTRODUCTION:CLASS-A SURFACE: a surface made by the designer which is given as an input to the plastic modeler to work on. It is aesthetic surfaceand the outer most surface.CLASS-B SURFACE:…

 DOOR HANDLE Tooling Axis creation: It is defined as the direction in which the mould/core and cavity open. Selection of the direction of the tooling axis depends on the ease at which components can be easily ejected. By analysing the component the most easily ejectable direction is somewhere close to the Z  …

 DOG HOUSE DESIGN ON DOOR TRIMS - Create the dog house for the centre console considering the design rules mentioned in the video. General Rules for Screw bosses. Draft of 0.5 degree on walls of boss Thickness is 40% of the nominal wall at the base. Height to diameter.   DOG HOUSE DESIGN ON DOOR TRIM AIM- Create…

    CORE AND CAVITY DESIGN   AIM: To Create the Core and cavity blocks for the switch bezel component. DESCRIPTION:   1. CREATING TOOLING AXIS -                       The Tooling Direction is basically the direction that the mold…

DOOR TRIM LOWER Aim: To Create the Door trim lower component through the given Class-A surface. Objectives: • Creation of Tooling axis with appropriate draft angle. • Creation of other surfaces (eg, B and C surfaces) for creating a solid component. • Perform Draft analysis on Class A surface and Solid model.…

DESIGNING A PILLAR USING MASTER SECTION OBJECTIVES To improvise the Class A surface by resolving bad patches and adding flanges to it.  To create A pillar solid model with the help of  improvised class A surface. To create B side features for the A Pillar using the master section given to us as an input. …

BENCHMARKING Benchmarking is a process of measuring the performance of a company’s products, services, or processes against those of another business considered to be the best in the industry, “best in class.” The point of benchmarking is to identify internal opportunities for improvement. By studying...…

UNDERBODY COATING   Underbody Coating is a sprayable coating, which protects the under surface of the vehicle from corrosion. Underbody coating provides long term protection from corrosion to car's underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically……

Aim : 1.Design Hood outer panel, inner panel and the necessary reinforcements by following the Master section mentioned with the design parameter  2.Submit an assembly of Hood inner panel, outer panel, latch, hinge and the reinforcements. 3.A detailed report about the Hood Design which includes a detailed explanation……