Question 1: Objective: 1) To Create a Simulink model of Doorbell using Solenoid block, where the bell will produce sound when the metal of the Solenoid get energised from a battery through a switch.                  2)  To Observe and analyze the output waveform of the…

Question 1: Objective: 1) Implementation of Control Logic of a "Washing Machine" using Stateflow that consists of processes with certain time delay.                 2) Observation of the system behaviour at both with or without Water Supply thorugh indication given by LED and also…

AIM OF THE PROJECT: Implementation and analysis of BAJA All-Terrain Vehicle(ATV) with Continuous Variable Transmission(CVT) at Four different scenarios in Matlab Simulink. OBJECTIVE: To run a system level simulation of BAJA-ATV as a prerequisite so as to observe the characteristics of the system at four different…

Before going into the question let us give a brief introduction about the software ADVISOR Tool: Introduction: ADVISOR tool stands for an Advanced Vehicle Simulator Model which was developed by National Renewable Energy Laboratory in order to produce a platform for system-level analysis and trade-off studies of advanced…

Question 1: a)Solution: Mapped Models: Mapped Models are used to analyse the performance of the subsystem during its steady state operation. This operation is basically implemented using the Look-Up table blockset, so all the performance  charecteristics starting from engine to motor and generator are identified in…

Question 1: Solution: There are basically three types of power converters employed in a vehicle and which are as follows: a) AC to DC Converters(Rectifier): As the availibility of DC Source is very limited as an electrical outlets in every places so the basic operation of a Rectifier is to convert the alternating…

Question 1: Solution: Objective: The aim of the assignment is to: a) run the H-Bridge Model so as to observe the variation in Speed of the DC Motor. b) decrease the peak value of the armature current draws by the DC Motor when its changes its direction from Forward to Reverse. Introduction: The controlling of the…

Question 1: Solution: Before going into the MATLAB program, let us get a brief idea of Braking and the corresponding Braking Energy. Braking is basically a process of controlling the velocity of a moving object by resisting its motion. A vehicle in motion posseses a good amount of Kinetic Energy and so in order to deaccelerate…

Project: POWERTRAIN FOR AIRCRAFT IN RUNWAYS  Aim Of The Project: 1) Detailed overview of an aircraft and it's parts. 2) Analyzing the behaviour of an aircraft during its motion on the ground and during take-off 3) Modeling and Estimation of the necessary parameters required to control the motion of the aircraft…

AIM OF THE PROJECT: Modelling an Electric Vehicle in MATLAB using a Battery and a DC Motor. OBJECTIVES: To create a Matlab-Simulink model for analysing the behaviour of an Electric Vehicle which includes the following purpose: System Level Configurations Model Parameters Results Conclusion INTRODUCTION:  Just…

AIM OF THE PROJECT: Modelling an Electric Rickshaw using various Driving Source as a Speed Reference. OBJECTIVES:  To create a Simple Matlab Model of an Electric Rickshaw showing all its major components as a subsystem starting from the Motor to the Vehicle Dynamics. To analyse and estimate the SOC, Vehicle Velocity,…

AIM OF THE PROJECT: Modelling an Electric Car with Li-Ion Battery using various Driving Source as a Speed Reference.OBJECTIVES: To create a Simple Matlab Model of an Electric Car showing all its major components as a subsystem starting from the Motor to the Vehicle Dynamics.To analyse and estimate the SOC, Vehicle…

Aim Of The Project: Identifying the direction of the vehicle based on the camera input. Objective of the Project: Development of MATLAB Simulink model as per requirement. Tag the requirements to the simulink model; tagging requirement 1 & requirement 2 to their corresponding subsystems is fine. MBD compliant changes,…

Aim Of The Project:  Implementation of the Traffic Jam Assistant algorithm which would predominantly feature in the IPC algorithm. Objective of the Project: The model must be developed in MATLAB Simulink as per MBD guidelines. Simulink Data Dictionary must be created for the model & must be linked to the model. Model Advisor…