Make a Simulink model of Doorbell using solenoid block Aim:-    To make a simulink model of Doorbell using solenoid  blocks are used in simulink:- Pulse genarator Switch Battery Solenoid Ideal translation motion sensor Mechanical translation reference…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

Carry out a system-level simulation of an all-terrain vehicle.  Download the model from the given link:  https://www.mathworks.com/matlabcentral/fileexchange/70576-baja-all-terrain-vehicle-atv-model Prepare a technical report explaining the model properties & comments on the results. Aim:- To prepare atechinical…

1.   For1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations.Aim:- to find the EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive…

1)What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  Aim:- To find the difference between mapped and dynamic model of engine, motor and generator. Procedure:- Maped Model Engine: Mapped model of an engine represent macro engine behavior…

1)  Which types of power converter circuits are employed in electric and hybrid electric vehicle?    The different configurations of EV power supply show that at least one DC/DC converter is necessary to interface the FC, the Battery or the Supercapacitors module to the DC-link. DC -DC converters:- In electric engineering,…

1) Creation of user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) Aim:- To Creation of user defined data type to implement the user interfaces for working with ‘Set’. procedure :- First we open the stm32 software then create  the .c tpye…

1)Implement the Code for controlling the retraction and extension of Airplane’s landing gear Aim:-To find and Implement the Code for controlling the retraction and extension of Airplane’s landing gear.  Procedured:- In the airplane has 3 gears for landing that is :- 1) NOSE GEAR 2) LEFT GEAR 3) RIGHT…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge…

AIM: To defined driving cycle, calculate the energy required for braking. STUDY 1; In electric vehicle require ny vehicle for acceleration as well as deacceleration of vehicle aslo. As we require to stop vehicle in stipulated time, we cannot allow vehicle to stop as per its inertia value.,for stopping vehicle …

1.(A) list out the total weight of various types of aircrafts: The aircraft gross weight (also known as the all-up weight and abbreviated AUW) is the total aircraft weight at any moment during the flight or ground operation. An aircraft's gross weight will decrease during a flight due to fuel and oil…

Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. GOALS: Implement a system on simulator for Controlling the DC motor using L293 motor driver. Displaying the running status of DC motor on the LCD display.…

In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04) CODE:- #include #define F_CPU 16000000ul#include #include #include #include #define lcd_data_dir DDRD // define lcd data port direction#define lcd_command_dir DDRC // define lcd command port direction#define…

AIM:- To understand different Battery chemistry.   OBJECTIVES:-                    1)Prepare a table that includes materials & chemical reactions occurring at the anode and cathode of different types of lithium-ion cells.            …

Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested…

Static Analysis: 1. Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_tbrun_examples\Ggrocers.c” (Single .c file), modify the Code to remove violations and make compliant to MISRA: C 2012 & CERT standards. Generate Code review report compliant to MISRA: C 2012 Coding Standards Generate…