Aim:  To prepare the concrete mix design for M35 grade concrete with fly ash and M50 grade concrete without fly ash.  Introduction: The mix design for concrete is calculated to proportioning the concrete ingredients to provide required strength and durability. Indian standard code books such as (IS 10262-2019, IS 456-2000,…

  Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from…

AIM: Design and Draft a Layout of Architectural Drawings for a plot size of 60'x20', facing East, and develop relevant structural drawings     INTRODUCTION: The Desired Drawings of Floor plan, Elevations, and Sections are Sketched in Autocad using various tools. The Step by step procedure of drawings is…

Aim: To create: Template, inserting text and attributes Doors of warehouse and placing it in blocks Electrical legend and making it blocks Different types of door for residential project Drawing bars, making it as block and making it as a table as bar bending schedule.   Commands used:  Block. Insert. Attributes.…

Q1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.     Aim: To Create the Kitchen Layout and to Also, use proper dimension techniques…

 Q1. Aim: Creating a layout of the Plan and Section A of the project in Challenges 7 and using the template type Tutorial-mArch.dwt in a scale as given in the Figure. Introduction: Layout is a option in the autocad that drawing can be changed into the sheet of paper with a suitable scale. And using the MV command for viewport.…

Aim: Creating a different 3D models by using autocad. The models creating by autocad are 3D furniture element,3D model of an isolated footing,AASTHO type Girder3d model of a drop column with panel and 3d model view of a  wall  Introduction: 3D model is a type that shows the objects in 3D view that created…

1. Create a 3D Isometric View of the building with plan and elevation given. Aim: To create a 3D isometric view of the building with plan and elevation Introduction: AutoCad is a such software where we can draw a 2D and  3D drawing with such tools. The 2D drawing is converted into 3D. Such examples are given…