GENETIC ALGORITHM The genetic algorithm is a method for solving both constrained and unconstrained optimization problems that is based on natural selection, the process that drives biological evolution. The genetic algorithm repeatedly modifies a population of individual solutions. At each step, the genetic algorithm selects…

OTTO CYCLE :- It is a gas power cycle used in spark ignition engine for its working.The entire modern petrol engine works on Otto cycle. It consist of four processes, Two isentropic (reversible adiabatic) processes and two isochoric (constant volume) processes. It has low compression ratio ranges from 7:1 to 10:1. The…

FLOW OVER A NACA AIRFOIL OBJECTIVE :  To model the flow simulation over NACA0017 airfoil And to compare lift and drag forces for different angle of attacks(0,2,4,6,8,10 deg). AIRFOIL : Airfoil, also spelled Aerofoil, shaped surface, such as an airplane wing, tail, or propeller blade, that produces lift and drag…

CREATING 1D ELEMENTS ON A PARALLEL BRACKET WITH DIFFERENT CROSS SECTIONS AND DOF OBJECTIVE: To create 1D elements (rod,beam bar elements) on a parallel bracket with different cross sections and DOF To create ROD element between \'a\' with RBE2 link and only translational DOFs And BOX Cross-Section with Dimension a= 12…

  Parsing NASA thermodynamic data INTRODUCTION  To parse data or information means to break it down into component parts so that its syntax can be analyzed, categorized, and understood. PARSER:A parser is a compiler or interpreter component that breaks data into smaller elements for easy translation…

SIMPLE PENDULUM TRANSIENT BEHAVIOUR SIMULATION AND ANIMATION OF ITS MOTION ORDINARY DIFFERENTIAL EQUATION : In mathematics, an ordinary differential equation (ODE) is a differential equation containing one or more functions of one independent variable and its derivatives. The term ordinary is…

MESHING OF HOOD CHALLLENGE Objective : To perform geometry cleanup of Hood,extract midsurface and generate mesh following the given mesh criteria. PROCEDURE:   Enable By topo in visualization toolbar to visualize in topology display mode.And enable display fixed points in display toolbar. Extract the midsuraces of…

HOUSING MODEL  Objective:  To generate tetramesh of the housing component by following the quality criteria. PROCEDURE  Import the geometry using import solver deck and import geometry by selecting file type and click import. Enable By topo in visualization toolbar to visualize in topology display mode.And…

Creation of 1D Connectors Challenge Objective :  To mesh the geometry as per the given quality criteria and creation of 1D connectors and attach the various parts of the given model. The following connections are made to attach the different parts of the model. 1. Right_Rail_2 & Front_truss_1:- Seam-Quad(angled+capped+L)…

Objective: To design and perform static structural analysis on plate with hole and plate with three holes, compare the deformation and maximum stress developed on two models. Procedure:  1.  Create static structural standalone system in ANSYS Workbench and add structural steel in engineering data. 2. Firstly,…