In this project, you will be creating the geometry and setting up the case in Converge Studio. And then simulating to analyze the drag and the down force experienced by the Ahmed body. You will also be performing the validation study.
In this project, you will work on the Ahmed body with a slant angle of 35° and run the simulation. You will do the following in this project,
In this project, you will be creating a geometry in any of the CAD packages you are comfortable with and setting up the case in Converge Studio by providing appropriate boundary conditions. Also, you will be learning the theory behind how to create a virtual wind tunnel and will be creating it. Through this project, you will be getting a very good insight on the concepts of turbulence modelling, Y+, calculating 1st cell height near the wall and also understand how to make use of Y+ calculator to calculate base grid size. You will get exposed to very strong features of fixed embedding, volume refinement, boundary layer generation which are really important as it gives user, a very good control on the cell count and cell count can easily be optimized using these features.
Frequently Asked Questions
SKILL-LYNC projects are mapped closely with what industry expects. When you work on a SKILL-LYNC project and publish it in your profile, recruiters are automatically notified about your profile. Your project submissions are graded so that students can get critical feedback on your work
In this project, you will be creating the geometry and setting up the cases for different angle of attacks in Converge Studio. And then simulating to analyze the drag and lift force experienced by an Airfoil at different angle of attacks.
This project deals with simulating the flow around a Mercedes Benz Actros truck with and without the trailer attachment, We will be studying the production of wake and how the trailer attachment affects the wake produced by the tractor and the effect this has on the production of drag on the vehicle. Suitable reports and plots will be used to measure the drag coefficient and to assess convergence. Various post processing techniques can be used to provide animations that clearly show the flow patterns.
In this project, you will be setting up the cases for the FSAE racing car in Converge CFD software and then simulating them to analyse the drag force and the down force experienced by each component of the FSAE car.
This project deals with simulating the flow around an Ahmed Body, which is a prototypical car model. In order to perform this simulation, a computational domain will be defined in the form of a virtual wind tunnel. The simulation will be run for 25 and 35° slant angles and the flow patterns will be studied for both cases. Multiple cases for various slant angles can be run to show how the separation at the rear takes place and how the wake is affected, ultimately affecting the drag produced by the body. Finally, the results will be compared with the experimental results to get an idea of which solution and turbulence models to use and fine tune the setup to provide the best results.
Learn industry relevant skills from technical experts
All of our courses are mapped to specific job functions in the market
Work on projects, publish to your profile and get hired in top tech-companies
In the last 12 months, we have placed 180+ students, helped students get over 500,000$ in scholarships
Get access to highly-dedicated technical and customer support teams
Once you are part of SKILL-LYNC, you can keep learning relevant skills through LIVE webinars and workshops
Engineering students who are fresh out of college often struggle to meet the expectations of their employers. More often than not, this stems from a gap between the skills they learned in school and those that are required to make them competitive in the workplace. Skill-Lync, an edtech startup based out of Chennai, aims to bridge this gap.
Chennai-headquartered online learning startup Skill-Lync has launched a Masters course in Electric Vehicle Design and Simulation. The company says the new course is the first such curriculum in India, that focuses on electric vehicles. The fee of the EV course is around Rs 275,000, with the option of a full time or part-time duration. The startup provides job leading courses for Mechanical, Electrical and Civil Engineering students in India and across the world. With colleges shut and students looking to make the most of the time that they are at home the startup has fast-tracked the development of this program and releasing it amid Covid-19.
Skill-Lync started out as a YouTube channel to share engineering tips. Today, it is an online training course that caters to mostly non-software engineering students, which make up around 60 percent of the total engineers that graduate every year.
In an attempt to ensure that there is no hiatus in student education during the ongoing lockdown, Govt of India’s All India Council of Technical Education - NEAT announced partnership with Chennai based Edtech startup Skill-Lync. The global startup Skill-Lync is first-of-its-kind engineering technical education platform that provides job leading courses for Mechanical, Electrical and Civil Engineering students in India and across the world.