← Course overviewFree lesson 1 of 3 · lesson 1 of 19Next lesson →

Unlock all 19 lessons of Introduction to Aero-Thermal simulation using ANSYS FluentFull course ₹40,000 · paid

Price & syllabus
Free lesson · 21 min · no payment

Introduction to CFD, Fluid Properties and the CFD Workflow

A free lesson from Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to Numerical Simulations in Fluid Flows”

What will you learn in this free Introduction to Aero-Thermal simulation using ANSYS Fluent lesson?

The instructor compares theoretical, experimental and CFD approaches to fluid flow and lists CFD applications. He then defines fluids and their properties, including specific heat and Newton's law of viscosity, and explains the three CFD steps, grid types and solver types.

  • Theory, experiment and CFD as analysis routes
  • Fluid properties: density, specific heat, viscosity
  • Newtonian versus non-Newtonian fluids
  • Structured, unstructured and hybrid grid types

What comes after lesson 1?

The next free lesson is lesson 2, “Aerodynamic Flow Classes, Shock Waves and Aerodynamic Heating” (25 min). Later in Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course (paid): lesson 4, International Standard Atmosphere; lesson 5, Introduction to Aero Thermal Simulations Using ANSYS Fluent; lesson 6, Introduction to ICE and CFD. The full course has 19 lessons (6 h 43 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hey guys, welcome to this video from the course Aerothermal Simulations using Ansys Fluid. In this particular video, you'll get an introduction to numerical simulations in fluid flows. In this course, we will cover the following topics. The first couple of weeks will be an introduction into what fluid flow is, what is exactly CFD. Next, we'll talk about different types of fluids and the properties that set them apart. The next section will deal with an overview of what exactly computational fluid dynamics is. Then, we'll talk about the governing equations for CFD, which is the Navier-Stokes equation.

We'll be getting into the different types of formulations for the Navier-Stokes equations, such as the integral formulation, formulation for rotating frames, and axisymmetric formulation. After that, we'll go into turbulence modeling, which is included in RANS. We will discuss in brief about LES and DNS as well. Don't worry about what these terms are. When you get to that particular video, you will get a better understanding of what it is. To carry out a CFD analysis, we need a grid where the calculations required to carry out the analysis are actually done.

So we'll be specifically talking about this here. A CFD analysis is carried out with a set of large number of equations, and it's for general conditions. Now, how do we specify the problem that we want? Well, it's done using boundary conditions. Boundary conditions allow the user to approximately replicate the real-life phenomenon numerically. There are different types of boundary conditions which will be covered in this topic. After carrying out the analysis, how do you make sense of your results? Well, you post-process it. That's how you get the cool-looking images that you would have seen if you've already done a couple of simulations previously.

But do you actually know what they mean? Well, we'll be going through them in this section of the course. In this particular video, we'll talk about the different approaches in carrying out a fluid flow analysis, the types of fluids, then a particular set of properties that you need to know, and then we'll describe how a fluid flows in an analysis, then we'll talk about the overview of CFD. In the olden days, there were two approaches that were mainly used for analyzing a fluid. The first one involved the use of equations that helped the scientists understand the behavior of a fluid.

Properties that were required to be understood were calculated using empirical formulas. The second one was an experimental approach. You basically had a replica of the system that you wanted to test, and similar conditions were reproduced. This is a test set-up in NASA for analyzing the Boeing aircraft. The theoretical approach involved the calculation of many equations, which was basically very time-consuming. The experimental approach involved setting up the experiment, which was expensive in terms of money. Now, with the advent of computers, scientists found a way to combine the use of computers and physics to better model fluid flows.

This approach came to be known as computational fluid dynamics. This approach involved the use of equations that you can see here, fed into a computer to solve for various terms that are required. Computational fluid dynamics, or CFD, came to be known as a better alternative for expensive experiments. CFD finds its application in many fields. Let me list some of them down. The aeroplane manufacturing industry has integrated CFD into its design, R&D, and manufacturing stages. In this course, we'll be primarily focusing on the design aspect of it.

CFD is applied in the automobile industry for analyzing both external and internal flows. The drag coefficient of the vehicle is measured through external flow analysis, while internal flow analysis consists of determining the flow inside the engine, which can be studied for optimization. CFD is used in industrial or manufacturing applications in optimizing casting processes by studying the way the mold flows. Another application of CFD is in designing of high-rise structures. While designing these buildings, the flow interactions with nearby buildings and pedestrians will be studied and appropriate design changes will be made.

Let's discuss what a fluid is and the types of fluids. If I ask any of you right now to give an example of a fluid, the first thing that might come to most of you will be water. Yes, water is a fluid. But how do you define a fluid? What sets it apart from other substances? Well, if you pour water from one container to the other, it automatically takes the shape of that container, right? But if you try to place a rectangular block inside a circular box, well, it's not going to go in, right?

Well, why is that? Well, the rectangular block, which is a solid, is resisting the circular box that you are trying to place it into, while the water, which is a well-known fluid, is not. It will simply take the shape of the container without any hesitation. This is exactly what defines a fluid. Fluids cannot resist external force and requires an amount of force close to zero to deform it. Gases and liquids such as air, water, benzene, etc. are considered as fluids. Now, if you have a sibling, you'll notice that there are a lot of different features that set you apart from them, right?

Even though you have the same parent, you can say that you and your sibling have different properties that set you apart. In the same way, fluids are defined by some properties as well, even if they come from the same parents. Let me list some of them now. You would have heard of most of them from your higher secondary education. They are pressure, temperature, density, thermal conductivity, specific heat, and viscosity. Now, we all know what the states of matter are – solid, liquid, and gas. Well, water, which is a liquid, can exist in three states of matter and it can be defined by just three properties.

The pressure, temperature, and density of water is enough to distinguish it when it exists in a solid state, a liquid state, or in the gaseous state. Since pressure, temperature, and density are properties that the majority of you are familiar with, we will go through them at a glance. Pressure is defined as the force acting per unit area and it has the units of newton per meter square or pascal. Temperature is a measure of the internal energy of a fluid. It expresses how hot or cold a fluid or anybody for that matter is.

Its unit is Kelvin in SI units. Now, density is mass per unit volume. It describes how heavy a fluid is. Now, if you have kerosene and water in a container, you will see that water is at the bottom. That's because water is more dense. Density has the units of kilogram per meter cube. Now, let's move on to the next property which is thermal conductivity. This is a pretty common property and it applies to solids as well. Thermal conductivity basically tells you the rate at which heat is transferred in a particular material.

To further understand what it is, let's take a small volume of fluid. If we assume two temperatures on the top face and the bottom face, then the temperature will flow from the higher side to the lower side. The rate at which this transfer of temperature takes place is governed by thermal conductivity. Thermal conductivity is governed by the Fourier's law of heat conduction. The equation shown here depicts this law for one dimension. As we can see, if we rearrange these terms, we get the equation for thermal conductivity.

From this equation, we can derive the units to be watt per meter kelvin. If the temperature difference is high, the value for thermal conductivity is usually high for solids and low for liquids and gases. If you compare the values of aluminum, water and air, you can clearly see the vast difference. This is mainly attributed to the closely packed nature of atoms in solids. Now let's get into what specific heat capacity is. But before that, let's understand what heat capacity means. Let's consider this situation here. It's a sunny day outside and you see a puddle of water on the road.

If you manage to measure the temperature of the water puddle and the road, you will see that both temperatures are different. So, why is that? Well, it's because of the different heat capacities that both materials possess. Heat capacity is the amount of energy that is required by a material to raise its temperature. For comparison purposes, we use specific heat capacity instead. Specific heat capacity is the amount of heat required to raise the temperature of a unit mass of substance by 1 degree. It's derived from the equation Q equals MC delta T. Here, Q is the amount of heat transferred, M is the mass of the object in kilograms if you require, C is the specific heat capacity and delta T is the change in temperature.

Rearranging the terms, we can arrive at the unit of specific heat which is joule per kilogram Kelvin. Now if you take the 3 states of water, you will see that the specific heats are different for each state. Viscosity in simple terms is the measure of a fluid's resistance to flow. Let's take a classic example. Take a glass of water and a glass of honey. If you pour both of them into another container, the glass with water will empty faster than the glass with honey. This is because honey is more viscous than water.

So how is viscosity determined? Let's take a look. First let's understand how the fluids interact at a closer level. Consider this layer of fluid flowing over a solid object. The layer closest to the solid surface will experience the most amount of shear. The velocity of the fluid as a result in this layer will be close to zero. If we consider the layer next to this one, the shear force experienced by it will be lesser. This is the same for subsequent layers as well. But the variation of the value of shear force is not exactly linear. Newton, through a set of experiments, determined that shear force experienced by a fluid at a point was directly proportional to the rate of change of velocity.

He formulated a law which came to be known as Newton's law of viscosity. The proportionality constant in this relation came to be known as viscosity. It is represented by mu with the units of newton second per meter square. This mu is known as dynamic viscosity and is commonly referred to as viscosity. The other type is called kinematic viscosity which we will not go into detail here. Now let's get into the type of fluids. Depending on whether a fluid obeys newton's law or not, they are divided into newtonian fluids for the fluids that obey this law. Non-newtonian fluids, as the name suggests, do not obey the newton's law of viscosity.

When they show time independent behavior, they are further termed as bhingemplastic, pseudoplastic and dilatant fluids. When they show time dependent behavior, they are termed as thixotropic and rheopectic. Then we have another classification called the viscoelastic fluid. As discussed earlier, the newton's law of viscosity is given by the formula tau equals mu du by dy. Fluids which obey this law are termed as newtonian fluids. The rate of shear stress directly relates to shear strain according to this law. All gases and most liquids which have simpler molecular formula and low molecular weight such as water, benzene, ethyl, alcohol etc. are considered as newtonian fluids.

Fluids which do not obey newton's law of viscosity are called non-newtonian fluids. All the non-newtonian fluids are known to follow a slight modification of the newton's law. Here the value of n and b varies for each type of non-newtonian fluid. The graph shown here describes the behavior of the various types of fluids that we discussed earlier which are newtonian fluids, bhingemplastic, pseudoplastics and dilatant fluids. The specific type of non-newtonian fluid will be discussed in the upcoming slides. Some non-newtonian fluids show time independent behavior while others show time dependent behavior.

The fluids that show time independent behavior are called bingemplastics, pseudoplastics and dilatant fluids. Bingemplastics do not deform until a certain threshold value of shear stress is exceeded. If you remember the previous equation which is of this form and you substitute a with mu and n with 1, some non-newtonian fluids show time independent behavior while others show time dependent behavior. The fluids that show time dependent behavior are called bingemplastics, pseudoplastics and dilatant fluids. Bingemplastics do not deform until a certain threshold value of shear stress is exceeded.

If you remember the previous equation which is a general form relating shear stress and shear strain and substitute a by mu and b with a non-zero value, then you get a fluid that behaves similar to a newtonian fluid which is just displaced by a threshold amount of x. Examples are toothpaste and jellies. If we take a look back at the graph, then you can see that bingemplastics and newtonian fluids behave similarly with a displacement of x here. Pseudoplastics are fluids which exhibit decreasing viscosity with an increase in shear strain.

Replace a with mu, b with 0 and n with 0.3. You get the equation that approximates pseudoplastic behavior. Common examples are blood and polymer solutions. Dilatant fluids exhibit an increase in viscosity. And if you replace a with mu, b with 0 and n equals 2. You get the equation that approximates the behavior of dilatant fluids. Examples are suspensions of starch, sand, etc. Now let's talk about non-newtonian fluids which show time dependent behavior. There are two types, namely thixotropic and rheopectic. As can be seen from the graph, after applying a shear force for a particular amount of time, viscosity decreases in a thixotropic fluid.

You can consider ketchup as an example. For rheopectic fluids, viscosity increases with time on application of force for a certain duration of time. Gypsum and printer ink are considered examples. The next type of non-newtonian fluid is viscoelastic which is classified separately since these types of fluid show elastic behavior. That is, it regains its shape after removal of force. A common example for such fluids are egg whites and DNA suspensions to a certain extent. Now that we have discussed the types of fluids, let's go on to discuss how fluid motion is described in fluid mechanics.

Now this will be only a brief discussion about these two approaches, which are namely Lagrangian and Eulerian. The Lagrangian approach assumes a particle to be tracked along its trajectory. Here only the variation of a particular property of the fluid with respect to time is considered. This image shows the movement of a particle and the trajectory that it follows. Now Eulerian approach focuses on a fixed point in space. The reference frame is fixed and the variation of properties according to space and time are considered here. This is the most commonly used approach in fluid mechanics.

To get a better perspective as to what it is, consider that you are walking your dog. You only have to focus on your dog and you know where it travels. This is the Lagrangian approach. Now consider that you are sitting in a park and watching all the other dogs walking around with their owners. This is the Eulerian approach where you focus on a lot of dogs at a particular position of space. Now that we have discussed how fluid motion is described, let's go into the methods employed in CFD.

There are three parts. The grid generation part or the pre-processing part. The second part is the solver part. And the final part is the post-processing part. In grid generation or the pre-processing part, your domain is discretized into smaller elements in the form of a grid. Calculations are done at these particular grid points by computers. The accuracy of the results that you obtain depends highly on the grid generation part as well. If you don't model your grids properly, it can lead to erratic results. Commonly used softwares in the industry are ISM CFD, Pointwise, ANSYS Meshing, Gambit, ANSA, etc.

After generating the grid, the model is imported into a solver where partial differential equations are solved to get the desired answers. Commonly used softwares are ANSYS, StarCCM Plus, and Comsol. After you obtain the results, you need to post-process it to better visualize the results. In ANSYS, this is done using ANSYS CFD Post. There are mainly three types of discretization methods called Structured, Unstructured, and Hybrid. In a structured grid, the elements or the grid is placed in an ordered manner. This type of grid leads to highly accurate results, but this is difficult to generate on complex bodies and is highly time consuming.

Another approach is the unstructured approach where the elements are placed in an unorderly manner. This leads to less accurate results but is easy to generate and can be generated on any body. The next type combines the best of both worlds. A structured grid is desired around areas of high interest and an unstructured grid is placed in any other area. This leads to easier generation when compared to Structured Grid but produces better accurate results than unstructured grids. There are two other types of grid generation methods that are not very common.

One is the meshless approach and the other is the Overset method. The meshless approach is also called the Hidden Mesh method because you don't actually see a grid that is being generated. Only nodes are placed around the body and calculations are done at these nodes. The Overset method uses an overlapping mesh. This is common for moving mesh methods and moving rotating frames. The partial differential equations are first solved on the Overset grid and then interpolated to the underlying grid. Now that we have discussed grid generation, let's look at the different types of solvers.

We have an Eulerian solver, a Navier-Stokes solver, and an additional species solver and multiphase solvers. When compared to the Navier-Stokes equations, the Eulerian solver does not consider viscous effects and solves only the pressure equations in a fluid flow. The Navier-Stokes equation, on the other hand, considers viscous effects and solves the pressure equations for better results. When you have chemical reactions taking place in a fluid flow such as combustion, you need to include the species modeling as well. When you have two or more fluids that are present at different states or phases, then you need the multiphase solver to exchange data from one phase to the other.

Next, as we have already discussed, Next we have the POST processor. It helps in visualizing or plotting your results and if you have used Ansys before you would already be familiar with CFD POST. POST processing can also be done in Fluent directly but specific packages such as CFD POST, TECHPLOT, and VISIT offers more options to better visualize your results. Now we've come to the end of this video. Let's have a brief summary. In this video, we discussed the various approaches in fluid flow analysis such as theoretical, experimental, and then we came into CFD.

Then we described what a fluid is and the type of flows based on the viscosity of the fluid. We also discussed the various properties that sets a fluid apart from each other. Then we discussed about two approaches that describe a fluid flow in a CFD analysis. Then we discussed the steps in CFD which is grid generation or the preprocessing part, the solving part, and the post-processing part. We also discussed the most commonly available packages for carrying out these steps. With this, we'll end this video. Thank you for watching.

Want the rest of Introduction to Aero-Thermal simulation using ANSYS Fluent?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Introduction to Aero-Thermal simulation using ANSYS Fluent course

The remaining 16 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Introduction to Aero-Thermal simulation using ANSYS Fluent course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.