Lesson finished
Up next: Aerodynamics Basics: Speed of Sound, Pitot Tubes and Forces
Unlock all 19 lessons of Introduction to Aero-Thermal simulation using ANSYS FluentFull course ₹40,000 · paid
Aerodynamic Flow Classes, Shock Waves and Aerodynamic Heating
A free lesson from Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Aerodynamic Flow Classifications”
What will you learn in this free Introduction to Aero-Thermal simulation using ANSYS Fluent lesson?
This lesson classifies aerodynamic flow, starting with continuum versus free molecular flow using the Knudsen number, then viscous, inviscid, compressible and Mach-number-based types. It explains why air is treated as incompressible below Mach 0.3, then covers shock waves, hypersonic flow and aerodynamic heating.
- Continuum flow and the Knudsen number
- Subsonic, transonic, supersonic, hypersonic flow
- Why air is incompressible below Mach 0.3
- Normal, oblique and bow shocks; heating effects
What comes after lesson 2?
The next free lesson is lesson 3, “Aerodynamics Basics: Speed of Sound, Pitot Tubes and Forces” (32 min). Later in Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course (paid): lesson 4, International Standard Atmosphere; lesson 5, Introduction to Aero Thermal Simulations Using ANSYS Fluent; lesson 6, Introduction to ICE and CFD. The full course has 19 lessons (6 h 43 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hey guys welcome to this video from the course Aerothermal Simulations using Ansys Fluent. Today we'll take a look at different types of flow and what exactly aerodynamic heating is. In this video we'll be taking a look at the types of flows, how to distinguish between continuum and low density flow which is the first classification. Then we take a look at how aerodynamic flow is classified based on viscous effects, compressibility, Mach number and then we also take a look at why air is considered incompressible at a Mach number of 0.3. Then we take a look at the types of shock waves, the physical aspects of hypersonic flows and then finally on what is aerodynamic heating. So let's proceed. In aerodynamics the first classification in the type of flow is continuum flow and low density and free molecular flow. Then continuum flow is further divided based on viscosity of the fluid where the two types are named as viscous and inviscid flow. Under viscous flow we have further classifications based on whether the flow is compressible or not. For compressible flows we have another classification based on the Mach number of the flow and they are divided as subsonic, transonic, supersonic and hypersonic. In the next few slides we'll be discussing the classifications in more detail.
So let's look at the first classification which is continuum flow. So what exactly is continuum? Consider this cup filled with water. Say that I want to measure density at 10 points on the surface of the water. I can do that by introducing 10 such points. And when I zoom into these two points again, I can introduce another 8 points in between these two to measure density. I can keep on doing this until I actually have water molecules. Now as long as you can do this, you can see that your system is continuous and that you are in continuum. At some point while you keep on zooming in, your assumption breaks and you will have to deal with individual molecules of water, but it can still move around as shown here.
Now when you are in this zone, you can see that your system is discontinuous. So depending on your observation frame, the same cup of water can be considered as continuous or discontinuous. To understand this more quantitatively, a term called Knudsen number is used. This number basically allows us to identify the validity of the continuum approach. The Knudsen number compares the mean free path, that is, the distance a molecule can travel before it collides with another, to the characteristic length of the system under consideration. So, if the Knudsen number is considered to be 0.1, then it means that our system or the domain under consideration is almost 10 times larger than the mean free path.
If the Knudsen number is 1e raised to minus 6, then we can say that our domain is at least a million times larger than the mean free path. Most of our mathematical equations are only valid in the continuum approach. Now let's look at the other end of the spectrum. If the Knudsen number is 10, then the mean free path is 10 times larger than the domain under consideration. This means that the collisions between molecules occur very infrequently. This type of flow is called as free molecular flow. This type of flow is usually observed in outer layers of the atmosphere where the density of air is very less and the molecules are spaced almost as far apart as the space shuttle.
There are cases where an intermediate behavior can take place where the molecules show both continuum and free molecular behavior. This is called low density flow. A majority of aerodynamic applications observe continuum flow, so we will be mainly focusing on that in this course. Let's move on to the next classification of continuum flow where it is divided based on the presence of viscous effects in a flow. If the viscous effects are considered or present, then this type of flow is called viscous flow. So how does the presence of viscous forces actually affect a flow? Well, when a fluid flows, molecules are transported from one point to the other, essentially transferring momentum and energy along with it. This can cause friction between surfaces and transfer of heat. Almost all flows in real life exhibit this.
There are, however, many cases in aerodynamics where the above mentioned effects are seen in a negligible manner. These types of flows are called inviscid flows. Take the flow over this flat plate. In this region, a boundary layer will develop where the flow is highly viscous and this region can be deemed as exhibiting viscous flow. The region adjacent to this airfoil where the flow seems rather undisturbed can be modeled accurately by using an inviscid assumption. Here, we can consider the effects of viscosity to be negligible and this region can be said to be exhibiting inviscid flow. In the later parts of this session, we will be going into detail on how it comes into effect.
For both viscous and inviscid flow, there is another classification based on whether density varies or not. When density is considered to be constant in a flow, it is said to be incompressible. A flow where density varies is called as compressible flow. Incompressible flow to a large extent is not that prominent in nature. Only flows with low Mach numbers can be said to be incompressible and analyzing such flows under this assumption will not lead to much loss of accuracy. The next classification is for compressible flows depending upon the Mach number of the flow.
Now, we have already seen what Mach number is. If you recall, it is the ratio of the velocity of flow to the speed of sound. Based on the Mach number, compressible flow is divided into subsonic, transonic, supersonic, and hypersonic. In the next slides, we'll go through what each classification means. For a moment, let's scrap the four classifications that we just mentioned in the previous slide. Based on the Mach number, the flow at a point can be subsonic if the Mach number is less than 1, sonic if Mach number equals 1, and supersonic if Mach number is greater than 1.
This is valid at a particular point. But when you take the whole flow field, then this assumption becomes invalid. The flow can accelerate or decelerate around a body, which can lead to changes in Mach number at certain regions. Let's consider the free stream Mach number. It will be denoted by M infinity from now on. In a flow, if M infinity is less than 1, then it should be subsonic, right? Well, that's not exactly how it works in all cases. Consider that we place this airfoil in a flow.
In the later part of the airfoil when the flow expands, there are chances that the Mach number in this region can exceed 1. This will lead to sonic or even supersonic flow in some cases. So, as a general rule of thumb, if the free stream Mach number is less than 0.8, the flow is considered to be subsonic. Transonic flow is the type of flow in which the flow can vary between subsonic and supersonic. Similar to how we chose the value for subsonic flow as 0.8, we'll put an upper limit of 1.2 as well.
Depending on whether M infinity is below or above 1 within the transonic region, two cases can occur. Let's take the case where M infinity is within 0.8 and 1. As explained in the previous slide, the fluid expands in this region and will lead to higher speeds locally. This can increase the Mach number above 1 and send it to supersonic flow. This will get terminated by very weak shock waves and the flow behind this region becomes subsonic again. The next case is when M infinity is between 1 and 1.2.
Due to the shape of the airfoil, a bow shock wave can be seen to propagate from the leading edge. A shock wave occurs due to the molecules hitting the leading edge of the airfoil and then reflecting back. There comes a point when the reflected molecules are not able to travel back and get accumulated as waves. After a certain point, the waves have to propagate back and this is how a shock wave is formed. The flow in this region decelerates and achieves a Mach number less than 1.
You can see a line here and this line represents the sonic line where M equals 1. This sonic line is highly dynamic. After this region, the Mach number returns to supersonic speeds. The next classification of flow is supersonic flow. When a flow approaches supersonic speeds, shock waves will form. As mentioned earlier, depending on the shape of the body, the shape of the shock wave changes. In aircrafts that are supposed to achieve supersonic speeds, you will not find much blunt shapes like the airfoil shape. If you observe the nose of this fighter jet, it's very sharp.
So for explaining this classification, we will use a wedge shape. Since the wedge is in supersonic flow, the shock waves are inclined in the flow direction. These type of shock waves are called oblique shocks. As the wedge angle decreases, this angle between the shock wave and the center of the wedge, let's call it beta, also decreases. This is often used in advanced jets like the SR-71 Blackbird to its advantage. Do check out more on this info. It's actually pretty interesting. Let's move on to the final classification, which is hypersonic flow.
Hypersonic flow is an extreme case of supersonic flow where the Mach number goes above 5. If you are in the end of the test, it's very important for the pytoronist. And the point of view is the speedometer. The end of the test is the 4. The top of the test is the target. The end of the test is the number of the test is the main level of the test. The much more easy is the initial due to the test. If you are in the test, such a main level of the test is the limit.
The problem is the actual speedometer. And In this case, if we keep the wedge angle the same as in the previous case, we can see that the oblique shockwaves are closer to the wedge. In hypersonic flow, the strength of the shockwave is actually very high. As a result, high temperatures will be experienced in the region between the body and the wave. This can cause chemical reactions to occur. This type of flow is of particular concern in atmospheric re-entry vehicles where the Mach number can go up to 36, which was the case for Apollo lunar return vehicles.
We've mentioned that air is considered incompressible below a Mach number of 0.3. Let's investigate why exactly. Let's say that a fluid element is at rest initially. Its density at rest will be rho 0. Now, let's accelerate this fluid element and let it reach a Mach number of M. The properties of the fluid element will change according to the governing equations that we derived earlier. Let's just focus on how density varies. Density varies according to the formula here. We have the plot of variation of rho by rho 0 with respect to Mach number.
We can see that as Mach number crosses 0.32, the variation of density is more than 5%. And as the Mach number increases, the variation of density increases as well. The statement that air is incompressible is merely an assumption. In real life, there are no incompressible flows. Assuming the variation of density as 0 will lead to simplification of the equations that are solved during analysis. Water is often considered as incompressible because of its high bulk modulus. It's almost 20,000 times more compressible than air. So, the assumption of water being incompressible is not at all used.
So, now that we have discussed why air is incompressible below 0.3, let's discuss the type of shock waves in an aerodynamic flow in a bit more detail. The types of shock waves are normal shock, oblique shock, expansion wave, and bow shock. We've briefly discussed them in a previous slide, but let's focus on them now. We'll mainly focus on normal and oblique shocks and expansion waves. A bow shock wave is basically a combination of normal and oblique shock wave. Let me explain further. Consider this image of a bow shock formed around a re-entry vehicle.
The re-entry vehicle is considered as a bluff body. A body is said to be bluff or blunt when it causes flow separation and the contours do not follow the shape of the body. Due to the dome shape of the re-entry vehicle, bow shocks are formed. This region of the shock wave which is directly adjacent to the leading edge of the re-entry vehicle is where the normal shock wave is present. The region adjacent to it where the shock wave arches is where oblique shock waves are present.
In the next few slides, we'll go into detail on how a shock wave actually occurs. In order to properly visualize what a normal shock wave is, let's place this brick in a flow field. When the molecules of air hits this flat phase, they reflect and try to go the opposite way. It's like a sound wave trying to propagate upstream. This wave is essentially disturbances or information trying to pass on to the nearby molecules. If the flow was subsonic, this disturbance would have no problem. But if the flow was supersonic, it's difficult for the disturbance to travel upstream.
So the disturbances pile up at a distance and form a standing wave. This is what you get to see as a shock wave. In the case of this flat-faced object, a major part of the shock wave will be flat and appear normal to the flow direction. Hence, it's called a normal shock wave. Let's take the concept of a stream tube here. A stream tube is an ideal representation of a group of streamlines in a flow which takes the shape of a tube. If we place the stream tube in the case of a normal shock wave, there will be a discontinuity in the tube as shown in the image here.
This discontinuity is because of the shock wave and due to this, there will be a large drop in velocity here. An oblique shock wave is different from the normal shock wave in the sense that it is inclined to the flow at an angle theta. If we take a stream tube here as well, the end of the stream tube will be smaller. The streamlines actually converge but do not intersect at the smaller area. You need to note here that Mach number of the flow decreases downstream and properties such as pressure and density increase which leads to a decrease in velocity.
Now let's discuss what expansion waves are. Consider this wedge shape where one part of the body is inclined downwards by an angle theta. If a supersonic flow takes place over the body, it will try to be tangent to the inclined surface. This is the point where an expansion wave takes place. This can be seen in the image here. Downstream of this expansion wave, Mach number increases and properties such as pressure, density, etc. decrease. So velocity increases. If we take the stream tube in this case, you will see that the streamlines diverge at the point where the expansion wave occurs.
With this, we've covered the different types of shockwaves. Now let's look into some physical aspects of a hypersonic flow. In the subsequent slides, we'll be focusing on five of them. Namely, thin shock layers, entropy layer, viscous interaction, high temperature effects and low density flow. Let's look at the first one which is the thin shock layer. The image here shows an oblique shock on a sharp-nosed body which is in supersonic speed. The layer between the shock wave and the body that is marked here is called the shock layer.
For a supersonic flow, the shock layer is quite large, but this is not the case for a hypersonic flow. Take a look at the two images here. The two wedges are of the same size but experiencing a flow of different Mach numbers. The one on the left has a Mach number of 2, while the one on the right has a Mach number of 25. The wedge in the supersonic flow stream has a significantly larger shock layer than the hypersonic flow. Blunt shapes such as that shown in the image are commonly used for hypersonic re-entry vehicles.
This shape, when undergoing hypersonic flow, experiences a shock wave as shown in the image here. Strong shock waves cause large changes in entropy because of the large velocity gradient that exists in the shock layer. Since the shock wave at the nose of the body is partly a normal shock, large changes in entropy is experienced here. This layer extends towards the body as shown. This thin layer in which the change in entropy is high is called the entropy layer. This entropy layer leads to unpredictable behavior due to the generation of vortices and is of particular interest in hypersonic flows alone.
We know that in a viscous flow, boundary layer formation takes place adjacent to the body. In a hypersonic flow, the formation of boundary layer is proportional to the square of m and inversely proportional to the square root of Reynolds number. This leads to an increase in temperature because of the large changes in kinetic energy experienced because of this. The change in kinetic energy affects the boundary layer growth due to the dependence of viscosity on temperature. The thick boundary layer flow affects the outer inviscid flow and creates a viscous interaction.
Due to this interaction, various aerodynamic parameters such as drag, lift, etc. get affected. For explaining high temperature effects, we can use this image here as well. As hypersonic flow enters the boundary layer, the kinetic energy of the flow drops by getting converted to internal energy. This rise in internal energy causes an increase in the temperature in the region adjacent to the body. The temperature can get pretty high in some cases. When the temperature goes up to 2000 Kelvin, oxygen dissociates. When it goes up to 4000 Kelvin, nitrogen starts dissociating, reacts with the free oxygen and forms oxides of nitrogen.
When the temperature goes up to 9000 Kelvin, the atoms start ionizing and affects the spacecraft adversely if not taken care of. Let's move on to the last aspect of hypersonic flow, which is low density flow. We discussed this briefly in one of the earlier slides. In low altitudes, air can be modeled as a continuous medium since the density is higher. We can employ a statistical or molecular approach here. But at very high altitudes, the density of air is very less. Hence, we can say that the Nudsen number is about 10 and we need to use a different approach to solve the equations here, which is based on kinetic theory.
In such cases, the body surface feels only a small number of distinct molecular impacts. As a result, the shock waves sort of lose their identity and become extremely thick. In such cases, aerodynamic coefficients such as drag, as plotted here, becomes dependent on Mach number, Reynolds number, and Nudsen number, with the Nudsen number being predominant. From the graph obtained by conducting experiments at NASA, it was determined that, as Nudsen number increased, drag coefficient increased with the following trend. Well, that's all that we need to discuss about the various aspects of hypersonic flow.
In the next slide, we'll take a look at aerodynamic. In the next slide, we'll take a look at aerodynamic. We've already discussed how aerodynamic heating occurs due to shock waves. The region adjacent to the body is subjected to an increase in internal energy which in turn leads to an increase in temperature. This increased temperature is transferred by the following means. If you take the small section of the solid, heat transfers from the heated air to the body by convection. Then the heat travels inwards to the solid through conduction and some heat gets radiated outwards as well.
So if we write the heat balance equation at the top layer, mcp delta T will be equal to heat transferred into the solid by convection minus heat conducted into the solid minus heat lost due to radiation. Usually the surfaces of space entry vehicles are composites which are composed of fused silica, etc. In that case, the heat transferred due to conduction will contain equivalent thermal conductivity of the material. This heat balance equation can be used to find the temperature of the solid. Aerodynamic heating depends on a couple of parameters such as the shape of the vehicle, the entry speed and trajectory, atmospheric composition and surface properties of the vehicle.
The shape of the vehicle can determine the distance of the shock wave from the nose of the body. If the distance is less, then we can say that the heating is more. The other parameter is the speed of the vehicle and the trajectory. The angle of attack of the body can determine the drag experienced by the body and will in turn influence heating of the body. The last parameter is the surface properties of the body. As discussed in the previous slide, the material of the body will affect the heating experienced by it.
Thermal protection systems are employed to take care of these problems to an extent. Ultra high temperature ceramics which have high melting point, good thermal resistance and with a high emissivity coating are used as tiles for the system. There are basically two types that are commonly used. They are high temperature reusable and low temperature reusable. High temperature reusables use a black borosilicate glass coating and can be used where temperatures reach up to 1260 degrees Celsius. Low temperature reusables contain a white coating and can withstand temperatures up to 649 degrees Celsius.
With this, we can conclude this video on types of aerodynamic flows and aerodynamic heating. Let's have a quick summary of the points covered in this video. We first went through the different classifications of aerodynamic flows. We started with the first classification which is continuum flow and low density flows. Then, we proceeded to further classify continuum flow based on viscous effects which is viscous flow and inviscid flow. Viscous and inviscid flows are further classified into compressible and incompressible flows. This was based on whether density is considered to be a constant or not.
Keep in mind that all flows in nature are considered compressible and incompressible nature of flow is considered for simplifying the equations that we solve. Based on Mach number of flow, compressible flows are further classified into subsonic flows for Mach number less than 1. Transonic flows when the Mach number is in a transitional region between subsonic and supersonic. And supersonic flow when the Mach number is above 1. Then we took a look at why exactly air is considered incompressible below Mach number of 0.3 and the theoretical reasoning behind this number.
Then we discussed about the different types of shock waves such as normal shock, oblique shock, expansion waves and a special case called bow shock. After this, we discussed about certain physical aspects of hypersonic flow. Hypersonic flow is an extreme case of supersonic flow where some characteristics specifically makes it stand out from supersonic flow. We discussed about the presence of thin shock layers, the entropy layer that is formed, the viscous interaction between viscous and inviscid flow in hypersonic flows, the high temperature effects on the body caused due to hypersonic flows, and a special case of hypersonic flows at very high altitudes which is low density flow.
Then finally we took a look at aerodynamic heating, the parameters that affect it, and the thermal protection systems employed to take care of this. Well, that's it for this video everyone. Thank you for watching. So, this is the first day to see that we have a good destination.