Free · 3 lessons · no paymentIntroduction to Aero-Thermal simulation using ANSYS Fluent: 3 free lessons
Three free lessons from Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course. They introduce CFD, fluid properties and the pre-processing, solver and post-processing workflow. They then classify aerodynamic flows by Knudsen and Mach number, cover shock waves and aerodynamic heating, and build the basics of speed of sound, pressure, pitot tubes and aerodynamic forces.
Last updated 16 Nov 2026 · 3 free lessons (1 h 18 min) · full course: 19 lessons (6 h 43 min), paid · ₹40,000
Free lesson 1 · 21 minIntroduction to CFD, Fluid Properties and the CFD WorkflowWhat will you learn in the free Introduction to Aero-Thermal simulation using ANSYS Fluent lessons?
- CFD workflow: grid, solver and post-processing
- Flow classes by Knudsen and Mach number
- Shock waves and aerodynamic heating basics
- Speed of sound, pitot tubes, lift and drag
Free lessons you can watch now
Lesson 1 · 21 minIntroduction to CFD, Fluid Properties and the CFD WorkflowThe instructor compares theoretical, experimental and CFD approaches to fluid flow and lists CFD applications. He then defines fluids and their properties, including specific heat and Newton's law of viscosity, and explains the three CFD steps, grid types and solver types.
Lesson 2 · 25 minAerodynamic Flow Classes, Shock Waves and Aerodynamic HeatingThis lesson classifies aerodynamic flow, starting with continuum versus free molecular flow using the Knudsen number, then viscous, inviscid, compressible and Mach-number-based types. It explains why air is treated as incompressible below Mach 0.3, then covers shock waves, hypersonic flow and aerodynamic heating.
Lesson 3 · 32 minAerodynamics Basics: Speed of Sound, Pitot Tubes and ForcesThe instructor defines aerodynamics and its role in aircraft, cars, HVAC and buildings, then derives mass flow rate and the speed of sound under isentropic and isothermal assumptions. He covers static, dynamic and total pressure with pitot tubes, isentropic relations, similarity parameters, and lift, drag and moments.
Which lessons of Introduction to Aero-Thermal simulation using ANSYS Fluent are free?
The first 3 lessons are free on Grow by Skill-Lync: 1 h 18 min of video from Skill-Lync's Introduction to Aero-Thermal simulation using ANSYS Fluent course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 16 lessons are listed in the outline below so you can see what each one covers.
How long is the Introduction to Aero-Thermal simulation using ANSYS Fluent course?
The full course has 19 lessons and 6 h 43 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 1 h 18 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid Introduction to Aero-Thermal simulation using ANSYS Fluent course on Skill-Lync, with mentor support and a certificate. For a career in CFD, the Post Graduate Program in Computational Fluid Dynamics goes further with industry projects and placement support.