GATE PI General Aptitude: every question of the 2024 and 2025 Production and Industrial papers solved

The GATE PI papers of 2024 and 2025 set 20 General Aptitude questions, worth 30 marks: dice nets, map colouring, series, pie and bar charts, a double cone and a dodecagon cut into squares. Each is solved by the fastest route, with its trap option and an answer recomputed in code against the official key. The 10 GATE 2026 PI questions are the Electrical paper's and are linked at the end.

Questions from the General Aptitude section of official GATE PI papers (IISc Bengaluru 2024, IIT Roorkee 2025; the IIT Guwahati 2026 set is shared with EE and solved on the Electrical pages); figures redrawn and solutions by Skill-Lync. · Updated 21 Nov 2026 · 20 questions

GATE 2024 · PI · Q.3MCQ · 1 markNumbers, series, probability and money

4-digit numbers divisible by 3 from the digits 1, 3, 4, 6, 7 with no repeats: how many?

How many 4-digit positive integers divisible by 3 can be formed using only the digits {1, 3, 4, 6, 7}, such that no digit appears more than once in a number?
  1. (A)24
  2. (B)48
  3. (C)72
  4. (D)12

Answer: (B) 48 Official key: B

  1. A number is divisible by 3 when its digit sum is. The five digits add to .
  2. Using four digits means leaving one out. The four left must add to a multiple of 3, so the digit left out must itself be a multiple of 3 (since 21 is): leave out 3 or 6.
  3. That gives two digit sets, {1, 4, 6, 7} (sum 18) and {1, 3, 4, 7} (sum 15).
  4. Each set can be arranged in ways, and none has a 0 to worry about in front. Total .

Trap: (A) 24 counts only one of the two digit sets.

The code listed all arrangements of four of the digits and kept those with a digit sum divisible by 3: 48, from the digit sets (1, 3, 4, 7) and (1, 4, 6, 7).

Where this shows up in industry

Counting arrangements that meet a rule is how part numbers, batch codes and test sequences are sized before a numbering scheme is fixed.

GATE 2024 · PI · Q.4MCQ · 1 markNumbers, series, probability and money

Sum of the infinite series 2 + 1/2 + 1/3 + 1/4 + 1/8 + 1/9 + 1/16 + 1/27 + ...

The sum of the following infinite series is
  1. (A)11/3
  2. (B)7/2
  3. (C)13/4
  4. (D)9/2

Answer: (B) 7/2 Official key: B

  1. Split the terms after the 2 into powers of 2 and powers of 3: and .
  2. A geometric series with sums to .
  3. Halves: . Thirds: .
  4. Total: .

Trap: forgetting the leading 2 gives , which is not an option, and adding the 2 to only one series is a common slip.

The code added the first 59 powers of a half and 39 powers of a third as exact fractions; the total is within of 7/2.

Where this shows up in industry

Geometric series appear whenever each step keeps a fixed fraction of the last, such as the stock left after repeated fixed-percentage draws or the error after each pass of an iterative calculation.

GATE 2024 · PI · Q.7MCQ · 2 marksNumbers, series, probability and money

A family has three children: probability of exactly two girls and one boy?

The probability of a boy or a girl being born is 1/2. For a family having only three children, what is the probability of having two girls and one boy?
  1. (A)3/8
  2. (B)1/8
  3. (C)1/4
  4. (D)1/2

Answer: (A) 3/8 Official key: A

  1. Each child is a boy or a girl with probability 1/2, so the birth orders are equally likely.
  2. Two girls and one boy can happen as GGB, GBG or BGG: 3 orders.
  3. Probability . In binomial form, .

Trap: (B) 1/8 is the probability of one particular order such as GGB. The question does not fix the order.

The code listed all 8 orders and counted those with exactly two girls: BGG, GBG, GGB, so 3/8.

Where this shows up in industry

The same binomial count gives the chance of exactly 2 defectives in a sample of 3, the starting point of every acceptance sampling plan.

GATE 2024 · PI · Q.8MCQ · 2 marksNumbers, series, probability and money

Two people invest in three funds; Person 1 gets ₹500 more; B and C return 15%: return of fund A?

Person 1 and Person 2 invest in three mutual funds A, B, and C. The amounts they invest in each of these mutual funds are given in the table.
Mutual fund AMutual fund BMutual fund C
Person 1₹10,000₹20,000₹20,000
Person 2₹20,000₹15,000₹15,000
At the end of one year, the total amount that Person 1 gets is ₹500 more than Person 2. The annual rate of return for the mutual funds B and C is 15% each. What is the annual rate of return for the mutual fund A?
  1. (A)7.5%
  2. (B)10%
  3. (C)15%
  4. (D)20%

Answer: (B) 10% Official key: B

  1. Both invested ₹50,000 in total, so only the returns differ. Let fund A return .
  2. Person 1's returns: .
  3. Person 2's returns: .
  4. Person 1 gets ₹500 more: , so and .

Trap: (C) 15% is the return of funds B and C. If A also returned 15%, both would end with the same amount, not ₹500 apart.

The code computed Person 1 minus Person 2 for each option exactly: 7.5% gives ₹750, 10% gives ₹500, 15% gives ₹0 and 20% gives ₹-500. Only 10% gives ₹500.

Where this shows up in industry

Setting up one unknown from a stated difference is the same move as finding an unknown machine rate from two shift reports that used it for different hours.

GATE 2025 · PI · Q.9MCQ · 2 marksNumbers, series, probability and money

If 3^(x²) = 27 × 9^x, what is 2^(x²) / (2^x)²?

If a real variable satisfies , then the value of is:
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (C) Official key: C

  1. Write everything as a power of 3: .
  2. So , that is . The exponent asked for is , which is therefore 3 directly.
  3. .
  4. Check with the roots and : and . Both give the same value.

Trap: , not . Treating them as equal gives , option (B).

The code solved (roots -1 and 3) and evaluated the expression at both as exact fractions: 8 each time, which is .

Where this shows up in industry

Rewriting both sides in one base is the same trick used to compare growth rates, such as tool wear or demand, given in different units or time steps.

GATE 2024 · PI · Q.5MCQ · 1 markCharts, tables and geometry

1,15,000 votes cast, 5,000 invalid, pie chart of valid shares: votes for B and C together?

In an election, the share of valid votes received by the four candidates A, B, C, and D is represented by the pie chart shown. The total number of votes cast in the election were 1,15,000, out of which 5,000 were invalid.

Based on the data provided, the total number of valid votes received by the candidates B and C is
Pie chart titled Share of valid votes: A 40%, B 25%, C 20%, D 15%A40%B25%C20%D15%Share of valid votes
  1. (A)45,000
  2. (B)49,500
  3. (C)51,750
  4. (D)54,000

Answer: (B) 49,500 Official key: B

  1. The chart shows shares of the valid votes, so first remove the invalid ones: valid votes.
  2. B and C together have .
  3. of .

Trap: (C) 51,750 is 45% of all votes cast, including the invalid ones. The chart title says valid votes.

The code computed 110,000 valid votes and B + C = 49,500; only (B) matches.

Where this shows up in industry

Reading which base a percentage refers to, good parts or all parts made, is the difference between a first-pass yield and an overall yield on a production report.

GATE 2025 · PI · Q.3MCQ · 1 markCharts, tables and geometry

A 4 x 4 digital image: how many pixels have intensity U at most 4?

A 4 × 4 digital image has pixel intensities () as shown in the figure. The number of pixels with is:
0102
4733
5544
6732
  1. (A)3
  2. (B)8
  3. (C)11
  4. (D)9

Answer: (C) 11 Official key: C

  1. Count row by row the pixels with values 0, 1, 2, 3 or 4.
  2. Row 1 (0, 1, 0, 2): 4. Row 2 (4, 7, 3, 3): 3. Row 3 (5, 5, 4, 4): 2. Row 4 (6, 7, 3, 2): 2.
  3. Total .

Trap: "at most 4" includes 4. Leaving out the three 4s gives 8, which is not an option, and counting only the 4s gives (A) 3.

The code counted every pixel with in the 16-value grid: 11.

Where this shows up in industry

Thresholding pixel values is the first step of machine-vision inspection on a production line, where pixels above or below a set intensity mark a scratch, a void or a missing part.

GATE 2025 · PI · Q.5MCQ · 1 markCharts, tables and geometry

A rectangle's width W goes up by 10% (L > W): which statement holds for all L and W?

A rectangle has a length L and a width W, where L > W. If the width, W, is increased by 10%, which one of the following statements is correct for all values of L and W?
  1. (A)Perimeter increases by 10%.
  2. (B)Length of the diagonals increases by 10%.
  3. (C)Area increases by 10%.
  4. (D)The rectangle becomes a square.

Answer: (C) Area increases by 10%. Official key: C

  1. Area: , exactly 10% more whatever L and W are.
  2. Perimeter: against . Only the width part grows, so the rise is less than 10% (for example 1.3% when , ).
  3. Diagonal: against . Again less than 10%, because L does not change.
  4. Square: only if happens to equal L, not for all values.

Trap: (A) feels right because "one side grows 10%", but the perimeter also includes the unchanged length.

The code tried 15 rectangles with L > W. Area always rose by exactly 10%; for , the perimeter rose 1.3% and the diagonal 0.23%, and none became a square.

Where this shows up in industry

Area scales with each dimension separately, which is why a 10% wider strip on a press line uses 10% more steel, while its edge trim length barely changes.

GATE 2025 · PI · Q.10MCQ · 2 marksCharts, tables and geometry

Dr. Gita's patients per shift over 100 shifts, earning ₹1000(X - 0.2): average per shift?

The number of patients per shift () consulting Dr. Gita in her past 100 shifts is shown in the figure. If the amount she earns is ₹ , what is the average amount (in ₹) she has earned per shift in the past 100 shifts?

Note: The figure shown is representative.
Bar chart of 100 shifts: 5 patients in 20 shifts, 6 patients in 40 shifts, 7 patients in 30 shifts, 8 patients in 10 shifts01020304050205406307108Number of patients per shift (X)Number of shifts
  1. (A)6,100
  2. (B)6,300
  3. (C)6,000
  4. (D)6,500

Answer: (A) 6,100 Official key: A

  1. Read the chart: 5 patients in 20 shifts, 6 in 40, 7 in 30 and 8 in 10, which is 100 shifts.
  2. Average patients per shift: .
  3. Earnings are a straight-line function of X, so the average earning is that function of the average X: , so ₹6,100.

Trap: (B) 6,300 is , forgetting the 0.2 deduction in every shift.

The code took the 100 shifts from the chart, found the mean 6.3 patients and the average earning ₹6,100; leaving out the 0.2 gives ₹6,300.

Where this shows up in industry

Averaging a linear cost over a frequency table is how a plant gets the mean cost per batch from a histogram of batch sizes: the mean of a straight-line formula is the formula at the mean.

GATE 2024 · PI · Q.1MCQ · 1 markVocabulary and grammar

Sick, infirm, moribund in rising intensity: silly, _____, daft?

If ‘→’ denotes increasing order of intensity, then the meaning of the words [sick → infirm → moribund] is analogous to [silly → _______ → daft].

Which one of the given options is appropriate to fill the blank?
  1. (A)frown
  2. (B)fawn
  3. (C)vein
  4. (D)vain

Answer: (D) vain Official key: D

  1. Read the first chain: sick (ill), infirm (weak from age or illness), moribund (close to death). Each word is a stronger degree of the same idea.
  2. So the blank must be a word in the same family as silly and daft: an adjective meaning foolish.
  3. Vain is the only one. Today it usually means proud of yourself or futile, but its older sense, from the Latin vanus (empty), is empty-headed and foolish.
  4. Frown is an expression of displeasure, fawn is a young deer, a colour or to flatter, and vein is a blood vessel. None means foolish.

Trap: three options sound like "vain" (fawn, vein) or are common words (frown), so the question is partly a spelling test. Pick the word by its meaning, not by sound.

The code listed each option's part of speech and meanings and kept only an adjective in the foolish family; only (D) passes. Whether vain sits exactly between silly and daft is debatable, but it is the only word in the family, and the official key is (D).

Where this shows up in industry

Words that sound alike and mean different things cause real errors in shop documents: a work instruction that says "wane" for "vane" or "bare" for "bear" is read wrongly at 2 a.m.

GATE 2025 · PI · Q.1MCQ · 1 markVocabulary and grammar

Analogy: Courage is to Bravery as Yearning is to _____

Courage : Bravery :: Yearning : __________

Select the most appropriate option to complete the analogy.
  1. (A)Longing
  2. (B)Yelling
  3. (C)Yawning
  4. (D)Glaring

Answer: (A) Longing Official key: A

  1. Courage and bravery mean the same thing, so the pair is a pair of synonyms.
  2. The word that means the same as yearning, a strong wish for something, is longing.
  3. Yelling is shouting, yawning is opening the mouth when tired, and glaring is staring angrily.

Trap: (B) yelling and (C) yawning start with the same letter and sound, which is all they share with yearning.

The code listed each option's meaning and kept only a synonym of yearning; only (A) passes.

Where this shows up in industry

Choosing the exact word matters in a non-conformance report: "slight burr" and "sharp burr" lead to different dispositions on the same part.

GATE 2025 · PI · Q.2MCQ · 1 markVocabulary and grammar

We _____ tennis in the lawn when it suddenly started to rain: which verb form?

We __________ tennis in the lawn when it suddenly started to rain.

Select the most appropriate option to complete the above sentence.
  1. (A)have been playing
  2. (B)had been playing
  3. (C)would have been playing
  4. (D)could be playing

Answer: (B) had been playing Official key: B

  1. "Started to rain" is in the simple past. The playing was already going on before that moment and was interrupted by it.
  2. An action in progress up to a point in the past takes the past perfect continuous: had been playing.
  3. (A) have been playing is present perfect continuous: it runs up to now, which clashes with the past "started".
  4. (C) would have been playing describes something that did not happen, and (D) could be playing is only a possibility.

Trap: (A) sounds natural in speech, but its "have" ties the action to the present, while the rain belongs to the past.

The code checked each form's time reference against a past interruption; only (B) is a completed fact running up to a past moment.

Where this shows up in industry

Shift logs need clear tenses: "the press had been running for 6 hours when the die cracked" pins down when the failure happened, which a root-cause study needs.

GATE 2025 · PI · Q.6MCQ · 2 marksVocabulary and grammar

Match Shanthala's four statements with Kanishk's replies: clear it up, take it up, bring it up, look it up

Column-I has statements made by Shanthala; and, Column-II has responses given by Kanishk.
Column-IColumn-II
P. This house is in a mess.1. Alright, I won’t bring it up during our conversations.
Q. I am not happy with the marks given to me.2. Well, you can easily look it up.
R. Politics is a subject I avoid talking about.3. No problem, let me clear it up for you.
S. I don’t know what this word means.4. Don’t worry, I will take it up with your teacher.
Identify the option that has the correct match between Column-I and Column-II.
  1. (A)P – 2; Q – 3; R – 1; S – 4
  2. (B)P – 3; Q – 4; R – 1; S – 2
  3. (C)P – 4; Q – 1; R – 2; S – 3
  4. (D)P – 1; Q – 2; R – 4; S – 3

Answer: (B) P – 3; Q – 4; R – 1; S – 2 Official key: B

  1. Each reply uses a phrasal verb with "up", and each verb has a different meaning.
  2. Clear up = tidy: the house in a mess (P) gets "let me clear it up" (3).
  3. Take up with someone = raise a complaint with them: unhappy marks (Q) get "I will take it up with your teacher" (4).
  4. Bring up = mention a subject: politics (R) gets "I won't bring it up" (1).
  5. Look up = find in a reference: an unknown word (S) gets "you can easily look it up" (2).
  6. So P-3, Q-4, R-1, S-2, which is (B).

Trap: "clear it up" can also mean explain, which seems to fit the unknown word (S). But then the mess has no reply, while "look it up" fits only S.

The code matched each statement to the one reply whose verb meaning it needs (P 3, Q 4, R 1, S 2), checked the match is one to one, and compared all four options; only (B) agrees.

Where this shows up in industry

Phrasal verbs trip up shop-floor instructions too: "set up the machine" and "set the machine up to fail" share a verb and mean very different things.

GATE 2024 · PI · Q.6MCQ · 2 marksReading and logical reasoning

Dairy farming began with gene mutations that let people digest milk: what can be inferred?

Thousands of years ago, some people began dairy farming. This coincided with a number of mutations in a particular gene that resulted in these people developing the ability to digest dairy milk.

Based on the given passage, which of the following can be inferred?
  1. (A)All human beings can digest dairy milk.
  2. (B)No human being can digest dairy milk.
  3. (C)Digestion of dairy milk is essential for human beings.
  4. (D)In human beings, digestion of dairy milk resulted from a mutated gene.

Answer: (D) In human beings, digestion of dairy milk resulted from a mutated gene. Official key: D

  1. The passage says the gene mutations "resulted in these people developing the ability to digest dairy milk". So the ability came from a mutated gene, which is (D).
  2. (A) goes too far: only "some people", the ones whose gene mutated, are described as gaining the ability.
  3. (B) is contradicted: those people could digest milk.
  4. (C) brings in a new idea, that milk digestion is essential, which the passage never mentions.

Trap: (A) feels true from everyday life, but an inference must come from the passage, and the passage limits the change to some people.

The code checked each option against the two facts the passage gives (some people farmed dairy; their mutated gene gave them the ability) and kept only the option those facts support; only (D) passes.

Where this shows up in industry

Root-cause reports need the same care: a defect that "coincided with" a supplier change and one that "resulted from" it are different findings, and only the second justifies changing the supplier.

GATE 2025 · PI · Q.7MCQ · 2 marksReading and logical reasoning

Two brothers share a weight curve that rises to age 50 and then falls: their ages when equal in weight?

Weight of a person can be expressed as a function of their age. The function usually varies from person to person. Suppose this function is identical for two brothers, and it monotonically increases till the age of 50 years and then it monotonically decreases. Let and (in years) denote the ages of the brothers and .

Which one of the following statements is correct about their age on the day when they attain the same weight?
  1. (A)
  2. (B)
  3. (C)
  4. (D)Either or

Answer: (B) Official key: B

  1. On the rising part (before 50), an older age always means a higher weight. So two different ages below 50 can never give the same weight: (A) is impossible.
  2. On the falling part (after 50), an older age always means a lower weight, so (C) is impossible too.
  3. Weight peaks at 50, and every other age gives less. So if one brother is exactly 50, the other has a lower weight: (D) is impossible.
  4. Equal weights therefore need one brother on each side of the peak: .

Trap: (D) looks tempting because 50 is the special age, but the peak weight is reached at one age only.

The code took three rise-then-fall weight curves (one symmetric, one rising fast, one falling fast), searched ages in quarter-year steps and found 278 pairs with equal weight. Every pair has the younger brother below 50 and the older above, for example 30 and 70 years on the symmetric curve; only (B) holds for all of them.

Where this shows up in industry

A quantity that rises to a peak and then falls takes each lower value twice, once on each side, as cutting tool performance or machine output does against speed, which is why an optimum sits between two equal readings.

GATE 2024 · PI · Q.2MCQ · 1 markFigures, folding and solids

Paint 15 parts of a figure so that no two neighbours share a colour: the least number of colours?

The 15 parts of the given figure are to be painted such that no two adjacent parts with shared boundaries (excluding corners) have the same color. The minimum number of colors required is
An ellipse holding a rectangle, which holds a circle split into three sectors by three spokes; lines from the rectangle's corners to the circle split the band around the circle into four parts, and two lines from each corner to the ellipse split the outside into eight parts, 15 parts in all
  1. (A)4
  2. (B)3
  3. (C)5
  4. (D)6

Answer: (A) 4 Official key: A

  1. The three sectors of the circle all meet at the centre and each pair shares a spoke, so they need three different colours: call them 1 (left sector), 2 (bottom sector) and 3 (right sector).
  2. The top part of the band around the circle touches the left and right sectors, so it must be colour 2. The left part touches the left and bottom sectors, so it must be 3. The right part touches the bottom and right sectors, so it must be 1.
  3. The bottom part of the band touches the bottom sector (2), the left part (3) and the right part (1). All three colours are used up around it, so it needs a fourth colour.
  4. Four is enough: the eight outside parts only touch their own side of the rectangle and two neighbours, so they can be filled from the four colours without a clash.

Trap: (B) 3 is the answer for many puzzle figures and for the circle alone. The bottom part of the band is where three colours run out.

The code built the 15 parts as a graph (26 shared borders), with each band part's contact with the sectors computed from where the diagonals and spokes meet the circle in the drawing. A full search finds no 3-colouring and a 4-colouring exists, so the minimum is 4. Corner-only contacts (the outer corner pieces touch the rectangle at a point) are not borders, as the question says.

Where this shows up in industry

Colouring a map so neighbours differ is the same problem as scheduling machines or exams so that conflicting jobs never share a slot, where each colour is a time slot.

GATE 2024 · PI · Q.9MCQ · 2 marksFigures, folding and solids

Three views of a dice are shown: which flat net folds into this dice?

Three different views of a dice are shown in the figure below.

The piece of paper that can be folded to make this dice is
Three views of the same dice. view 1: top 5, left face 4, right face 1; view 2: top 4, left face 6, right face 3; view 3: top 2, left face 6, right face 5541463265
  1. (A)Net A: top row 5 and 1; below the 1 a column 4, 6, 2; 3 to the right of 2514623
  2. (B)Net B: top row 5 and 1; below the 1 a column 4, 2, 6; 3 to the right of 6514263
  3. (C)Net C: top row 5 and 1; below the 1 a column 3, 2, 4; 6 to the right of 4513246
  4. (D)Net D: top row 5 and 1; below the 1 a column 4, 6, 3; 2 to the right of 3514632

Answer: (A) the net with 5 and 1 on top, then 4, 6, 2 down the column and 3 beside the 2 Official key: A

  1. Find opposite faces from the views. 4 is seen next to 5, 1, 6 and 3, so the number never seen with it, 2, is opposite 4.
  2. 6 is seen next to 4, 3, 2 and 5, so 1 is opposite 6. That leaves 3 opposite 5.
  3. In each net, the four squares in a column fold into a ring, so squares two apart in it are opposite. The square left of the top of the column and the square right of the bottom end on opposite sides too.
  4. Net (A): column 1, 4, 6, 2 puts 1 opposite 6 and 4 opposite 2, and the side squares 5 and 3 are opposite. All three pairs match.
  5. Net (B) has 1 opposite 2, net (C) has 1 opposite 2, and net (D) has 4 opposite 3: each breaks a pair, so only (A) can make this dice.

Trap: all four nets have 5 and 1 side by side at the top, matching the first view, so the top row cannot decide it. The opposite pairs do.

The code folded each net into a cube in 3D, print side out, and tested all three views including their handedness (which face is on the left and which on the right around the corner). Net (A) fits all three views; the others fail (B: fails views 2 and 3; C: fails views 1 and 2 and 3; D: fails views 2 and 3). As a control, the mirror image of net (A) fails, so the test does read left from right. It checks which number is on which face, not the tilt of each printed digit.

Where this shows up in industry

Picturing how a flat blank folds into a box is exactly what a sheet-metal or packaging engineer does when checking a development drawing before cutting.

GATE 2024 · PI · Q.10MCQ · 2 marksFigures, folding and solids

Two cones base to base, cut by a plane through both vertices: shape of the section?

Visualize two identical right circular cones such that one is inverted over the other and they share a common circular base. If a cutting plane passes through the vertices of the assembled cones, what shape does the outer boundary of the resulting cross-section make?
  1. (A)A rhombus
  2. (B)A triangle
  3. (C)An ellipse
  4. (D)A hexagon

Answer: (A) A rhombus Official key: A

  1. Both vertices lie on the common axis, so a plane through both of them contains the axis.
  2. A plane through the axis of one cone cuts it in an isosceles triangle: two slant edges and a diameter of the base.
  3. The two cones give two such triangles sharing the same diameter, one pointing up and one pointing down.
  4. The outer boundary is the four slant edges. They are all equal (the cones are identical), so the shape is a rhombus. It becomes a square only if the cone's height equals its base radius.

Trap: (C) an ellipse is what a slanted plane that misses the vertices cuts from one cone. A plane through the vertex never gives a curve.

The code put cones of radius 3 and height 4 apex to apex, cut them with the plane through the axis and checked the boundary: four straight edges, each 5.0 long, a rhombus.

Where this shows up in industry

Imagining a section through a solid is daily work in manufacturing drawings: a section view through the axis of a turned part shows its true profile, just as this cut shows the cones' true slant.

GATE 2025 · PI · Q.4MCQ · 1 markFigures, folding and solids

Rectangle 1, triangle 2, ellipse 3 overlap: which numbers belong in the regions P, Q and R?

In the given figure, the numbers associated with the rectangle, triangle, and ellipse are 1, 2, and 3, respectively. Which one among the given options is the most appropriate combination of P, Q, and R ?
A rectangle, a triangle and an ellipse overlapping. Rectangle only: 1. Triangle only: 2. Ellipse only: 3. Rectangle and ellipse, outside the triangle: 4. All three shapes: P. Triangle and ellipse, outside the rectangle: Q. Rectangle and triangle, outside the ellipse: R2R41PQ3
  1. (A)P = 6; Q = 5; R = 3
  2. (B)P = 5; Q = 6; R = 3
  3. (C)P = 3; Q = 6; R = 6
  4. (D)P = 5; Q = 3; R = 6

Answer: (A) P = 6; Q = 5; R = 3 Official key: A

  1. Find the rule from the region already filled in. The 4 sits inside the rectangle (1) and the ellipse (3), but outside the triangle, and . So each region holds the sum of the numbers of the shapes it lies in.
  2. P is inside all three shapes: .
  3. Q is inside the triangle and the ellipse but outside the rectangle: .
  4. R is inside the rectangle and the triangle but outside the ellipse: .

Trap: (B) swaps P and Q. Q lies to the right of the rectangle's edge, so the rectangle's 1 does not count there.

The code tested each label point of the redrawn figure against the three shapes and summed their numbers. The rule gives back the printed 1, 2, 3 and 4 exactly, then P = 6, Q = 5 and R = 3; only (A) matches.

Where this shows up in industry

Overlapping regions with summed codes are how a fault matrix or a bit-coded status word works: each condition adds its own value, so the total tells you which ones are active.

GATE 2025 · PI · Q.8MCQ · 2 marksFigures, folding and solids

A regular dodecagon in a circle of radius r is cut into 12 triangles: how many squares of side r can they form?

A regular dodecagon (12-sided regular polygon) is inscribed in a circle of radius r cm as shown in the figure. The side of the dodecagon is d cm. All the triangles (numbered 1 to 12) in the figure are used to form squares of side r cm and each numbered triangle is used only once to form a square.

The number of squares that can be formed and the number of triangles required to form each square, respectively, are:

Note: The figure shown is representative.
Regular dodecagon in a dashed circle of radius r, cut into 12 triangles: from the centre, equilateral triangles 1, 4 and 7 (two radii and a chord), thin triangles 2, 3, 5, 6, 8 and 9 (two radii and a side d), and small triangles 10, 11 and 12 between each chord and two sides of the dodecagon123456789101112d
  1. (A)3; 4
  2. (B)4; 3
  3. (C)3; 3
  4. (D)3; 2

Answer: (A) 3; 4 Official key: A

  1. First the total area. Joining the centre to all 12 corners splits the dodecagon into 12 equal triangles, each with two sides r and a 30° angle between them, area . Total area .
  2. Each square of side r has area , so all 12 pieces make exactly 3 squares.
  3. The pieces come in three kinds: 3 equilateral triangles (1, 4, 7), 6 thin triangles (2, 3, 5, 6, 8, 9) and 3 small triangles between a chord and two sides (10, 11, 12). 12 pieces over 3 squares is 4 each.
  4. One square really does form: put an equilateral triangle on the bottom side of the square. The two triangles left at the sides have two sides r and a 30° angle, the thin triangles. The gap at the top has sides d, d and r, the small triangle. So each square is one equilateral, two thin and one small triangle.

Trap: (B) 4; 3 also uses all 12 triangles, but four squares need of area and the dodecagon has only .

The code built the 12 triangles from the vertices of a dodecagon with and found their areas sum to exactly 3 (0.433 for an equilateral, 0.25 for a thin one, 0.067 for a small one). It then built a unit square from four triangles as above and matched their side lengths to triangles 1, 2, 3 and 10 (side ), so the pieces are congruent and fill the square.

Where this shows up in industry

Cutting a sheet into pieces that rebuild into other shapes with nothing wasted is the nesting problem behind laser and plasma cutting layouts, where every scrap triangle is money.

GATE 2026 PI aptitude questions

GATE 2026 PI was held in the same session as Electrical (EE), so the two papers had the same General Aptitude section, word for word, with the same keys. All 10 are solved on the Electrical pages:

From GATE prep to a production, quality or industrial engineering career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.