GATE Production and Industrial cut-off: 2024 to 2026, and what it means for 2027

Official GATE PI qualifying marks for the last three years, the topper's marks each year, and how many marks a GATE score of 400 to 800 took. Every number is from the organising institutes' own pages; the derived ones show their working.

Status as of 16 Nov 2026, 10:30 ISTGATE 2027 PI cut-off: out with the result on 19 Mar 2027.

The 2027 qualifying marks are announced only on result day. Until then, the official 2024 to 2026 cut-offs below are the best guide. Under the GATE 2027 rules, the general cut-off will fall between 25 and 40 marks.

Checked against the official GATE 2027 website (organised by IIT Madras). Compiled by Skill-Lync. Updated 16 Nov 2026.

What was the GATE Production and Industrial cut-off in 2026?

36 marks out of 100 for general candidates, 32.4 for OBC-NCL/EWS and 24 for SC/ST/PwD, per IIT Guwahati's official table. 3,673 of 4,849 registered candidates wrote the PI paper. The cut-off was 35.6 in 2025 and 30.5 in 2024.

2026 GEN36
2026 OBC-NCL/EWS32.4
2026 SC/ST/PwD24
Change vs 2025+0.4
010203040floor 25cap 4030.527.420.3202435.63223.720253632.4242026010203040floor 25cap 4030.527.420.3202435.63223.720253632.4242026
GEN OBC-NCL/EWS SC/ST/PwD. Qualifying marks out of 100, from the official GATE 2024 (IISc), 2025 (IIT Roorkee) and 2026 (IIT Guwahati) cut-off tables. Dashed lines: the general-category floor of 25 and cap of 40 (the cap applies from 2025).
YearGENOBC-NCL/EWSSC/ST/PwDRegisteredAppearedTurn-out
20263632.4244,8493,67375.7%
202535.63223.74,7913,54774.0%
202430.527.420.34,9153,72575.8%

The general cut-off ranged from 30.5 to 36 marks between 2024 and 2026, a spread of 5.5 marks. About 74 to 76% of registered PI candidates actually wrote the paper each year. PI was the 23rd largest of the 36 GATE 2026 papers by candidates who appeared, and registrations fell 1% from 4,915 in 2024 to 4,849 in 2026.

Compare the other core papers: GATE Mechanical cut-off, GATE Electrical cut-off, GATE Civil cut-off, GATE Instrumentation cut-off, GATE ECE cut-off. All 36 papers are on the GATE result and cut-offs page.

Why did the GATE PI cut-off change from 35.6 to 36?

The general cut-off is the mean plus one standard deviation of every PI candidate's marks, kept between 25 and 40. So it follows how everyone scored, not a fixed target. Neither year hit the floor or the cap, so the mean plus one standard deviation of all PI marks was 35.6 in 2025 and 36 in 2026.

That makes the cut-off a summary of the paper, not a target. Both years sat strictly between the floor and the cap, so the mean plus one standard deviation of all PI marks moved by exactly 0.4 marks, from 35.6 to 36. A higher cut-off means PI candidates as a whole scored higher in 2026, so the same mark was worth less.

The other categories follow from the general mark: in every year here, the OBC-NCL/EWS cut-off is 0.9 times it and the SC/ST/PwD cut-off two-thirds, to within the table's rounding. The GATE 2027 rule is the same, and the result page shows the formula.

PI was a single-session paper in both years (on 14 Feb 2026, forenoon in 2026, and 15 Feb 2025, forenoon in 2025), so your raw mark is the mark used for the cut-off and the score, with no normalisation.

How many marks do you need for a GATE PI score of 600?

at most 54.5 in 2026, at most 54.9 in 2025, at most 51.3 in 2024 (marks out of 100, general qualifying mark as the base). Skill-Lync worked these out from the official score formula and the topper's official marks and score each year. "At most" means the topper hit the 1000 cap that year, so only an upper limit is known.

YearAIR 1 marksAIR 1 scoreTop-0.1% averageScore 400Score 500Score 600Score 700Score 800
2026841000≤ 76.6≤ 39.7≤ 47.1≤ 54.5≤ 61.8≤ 69.2
202585.671000≤ 78≤ 39.5≤ 47.2≤ 54.9≤ 62.6≤ 70.3
202484.671000≤ 76.3≤ 34.7≤ 43≤ 51.3≤ 59.7≤ 68

Marks out of 100. AIR-1 marks and scores from the official all-India-rank pages of GATE 2024, 2025 and 2026. "≤" means the topper's score was capped at 1000 that year, so the true value is at or below the number shown.

How we got the middle column. The GATE score is a straight line: the general qualifying mark scores 350 and the average mark of the top 0.1% of candidates (or the top 10, if that's more people) scores 900. GATE doesn't publish that average, but it does publish the topper's marks and score, and two points fix a line:

and are the AIR-1 candidate's official marks and score, and the general qualifying mark. If is the maximum of 1000, the uncapped score was at least 1000, so the formula with gives an upper limit for .

In all three years the PI topper hit the maximum of 1000, so every top-0.1% average here is an upper limit and the marks for each score are "at most" values. The true numbers can be lower.

The score formula with 350 and 900 is the one printed in the GATE 2026 and 2027 brochures; the 2024 and 2025 rows assume it was the same in those years.

Check your mark against past PI papers

YearQualified?GATE score

Scores use each year's general qualifying mark and the top-0.1% average above. "At least" means that year's average is an upper limit, so the real score was this or higher. Scores are capped at 1000. A past year's paper is a guide, not a prediction for 2027.

What will the GATE 2027 Production and Industrial cut-off be?

Nobody knows until the result on 19 Mar 2027: it depends on how all PI candidates score in 2027. The rule bounds it: the general cut-off can't go below 25 or above 40, OBC-NCL/EWS is 90% of it and SC/ST/PwD two-thirds. Over 2024 to 2026 it was 30.5 to 36.

Two things are worth planning around instead of a guessed number. First, the band: aim well above 36, the highest general PI cut-off of the last three years, because qualifying is only the first step. Second, the score. A GATE score of 600 in PI took at most 54.5 in 2026, at most 54.9 in 2025, at most 51.3 in 2024 (marks out of 100). That is the kind of number admissions and PSUs compare, and it moves with the paper just like the cut-off does.

GATE 2027 runs on 6 days, 6 Feb 2027 to 21 Feb 2027; the paper-wise schedule is still TBA on the official site. Dates and every later change are on the GATE 2027 exam dates page.

Is clearing the GATE PI cut-off enough for an IIT M.Tech or a PSU job?

No. The cut-off only decides who qualifies and gets a scorecard. IITs and NITs admit by their own GATE score cut-offs, and PSUs shortlist by score or rank against their vacancies, often well above the qualifying mark. The GATE brochure says qualifying guarantees no admission, scholarship or job.

The GATE score stays valid for three years from the result date, so a 2027 score can still be used for applications in 2028 and 2029.

Which PSUs recruit through GATE PI?

None of the 19 PSUs whose GATE recruitment notices Skill-Lync read (21 Nov 2026) takes a GATE PI score. Eight (NTPC, GAIL, DVC, NHPC, BHEL, Mazagon Dock, RINL and NMDC) accept production or industrial graduates for the Mechanical post, but on GATE ME. Seven (IOCL, Coal India, EIL, NLC India, ONGC, HAL and BEL) do not accept those degrees.

So for a PSU job, the paper that counts is ME, even with a production or industrial engineering degree. The PI paper overlaps with ME in manufacturing and industrial engineering, but PSUs shortlist on the paper named in their notice, not on your degree. A PI score is useful where an institute's M.Tech or PhD admission lists PI among its accepted papers; check that institute's own list.

PSU and the latest GATE-based drive readProduction / industrial degree for the Mechanical post
NTPCEngineering Executive Trainee 2025 through GATE 2025 (Advt 14/24, Feb 2026)Eligible, but must write GATE ME. Mechanical, Production, Industrial, Production & Industrial, Thermal, Mechanical & Automation, Power.
GAILExecutive Trainee through GATE 2027 (advertisement of 1 Sep 2026; same rule for GATE 2025 and 2026)Eligible, but must write GATE ME. Mechanical, Production, Production & Industrial, Manufacturing, Mechanical & Automobile.
DVCExecutive Trainee special drive through GATE 2025 (Advt PLR/ET/04/2026/05)Eligible, but must write GATE ME. Mechanical, Production, Industrial, Production & Industrial, Thermal, Mechanical & Automation, Power.
NHPCTrainee Engineer special drive through GATE 2024/2025 (NH/Rectt./02/2026)Eligible, but must write GATE ME. Mechanical, Production, Thermal, Mechanical & Automation (Industrial not listed).
BHELEngineer Trainee through GATE 2018 (Advt 01/2017; BHEL's last GATE-based drive)Eligible, but must write GATE ME. 12 listed, including Production, Industrial, and Production & Industrial.
Mazagon DockExecutive Trainee (Technical) through GATE 2019 (Advt MDL/HR-CR/REC/63/2018; MDL's last GATE drive)Eligible, but must write GATE ME. Mechanical, Mechanical & Industrial, Mechanical & Production, Production, Production Engineering & Management, Production & Industrial.
RINLVizag Steel Management Trainee (Technical) through GATE 2019 (Rectt. Advt 01/2019; RINL's last GATE drive)Eligible, but must write GATE ME. Mechanical, Mechanical & Automation, Mechatronics, Industrial & Production, Industrial, Mechanical Production & Tool, Production Technology, Manufacturing, Manufacturing Process & Automation, Production, Power.
NMDCExecutive Trainee through GATE 2022 (Employment Notification 06/2023, on NMDC's recruitment portal; NMDC's Aug 2025 notice says its next drive takes GATE 2026)Eligible, but must write GATE ME. Mechanical, Mechanical & Automation, Industrial and Production, Mechanical Production, Production, Mining Machinery.
NPCILExecutive Trainee 2026 through GATE 2024, 2025 or 2026 (NPCIL/HQ/HRM/ET/2026/02)Unclear. Mechanical, Production.
MIDHANIManagement Trainee (Technical) through GATE 2017 (Advt MDN/HR/CPS/R8/E/10/17; MIDHANI's last GATE drive)Unclear. Mechanical (production and industrial not named).
SAILManagement Trainee (Technical) through GATE 2024 (short advertisement for 249 posts; SAIL's last GATE drive)Unclear. Not listed in the short advertisement.
IOCLEngineers/Officers through GATE 2024 (DP/5/5/Open)Not eligible. Mechanical only; Industrial, Manufacturing and Production excluded.
Coal IndiaManagement Trainee through GATE 2024 (Advt 04/2024)Not eligible. Mechanical only; Production and Industrial listed as not eligible.
EILManagement Trainee through GATE 2026 (Advt 2025-26/18; eligibility FAQ of the GATE 2023 drive)Not eligible. Mechanical only; Industrial and Production not eligible.
NLC IndiaGraduate Executive Trainee through GATE 2025 (Advt 10/2026)Not eligible. A production-only degree is not; the combined Mechanical & Production degree is, with GATE ME.
ONGCGraduate Trainee through GATE 2023 (Advt 1/2024; later drives use ONGC's own test)Not eligible. Mechanical only, no equivalents.
HALManagement Trainee / Design Trainee through GATE 2017 (Advt HAL/HR/25(43)-GATE/2016; HAL's last GATE drive)Not eligible. Only Mechanical, Mechanical & Industrial and Mechanical & Production; other branches not eligible.
BELProbationary Engineer through GATE 2013 (notice of 13 Sep 2012; BEL's last GATE drive)Not eligible. Mechanical only.
AAIJunior Executive through GATE 2023, 2024 or 2025 (Advt 09/2025/CHQ)No Mechanical post. Posts only for Architecture (AR), Civil (CE), Electrical (EE), Electronics (EC) and IT (CS) papers.

NPCIL: the notice admits production graduates for the Mechanical post but asks for a GATE score "in the same engineering discipline as the qualifying degree discipline" without naming a paper. Ask NPCIL before relying on a PI score.

MIDHANI: its last GATE drive (2017) asked for a degree "in respective discipline (Mechanical/ EEE / Metallurgy)" and shortlisted on GATE score without naming a paper. Its later Management Trainee drives use a written test, and the 2021 one accepted Mechanical or Production degrees.

SAIL: its GATE 2024 drive took eight GATE papers, with ME for Mechanical and no PI, but the short advertisement lists no degrees and the detailed one is no longer online. SAIL's 2025 drive (Advt C-97/2025) used its own computer-based test and accepted production, industrial and manufacturing degrees for the Mechanical post.

No GATE-based drive found: Cochin Shipyard (Executive Trainee 2026/1: its own online test, then group discussion and interview); Bharat Dynamics (Management Trainee, Advt 2025-4: a computer-based test and interview). A GATE score, PI or ME, does not get you into those drives.

Read from each PSU's own notice (linked) on 21 Nov 2026. Eight of these PSUs have since moved to their own tests or interviews; their last GATE drives: BEL (GATE 2013), MIDHANI (GATE 2017), HAL (GATE 2017), BHEL (GATE 2018), Mazagon Dock (GATE 2019), RINL (GATE 2019), ONGC (GATE 2023) and SAIL (GATE 2024). The official GATE 2025 and 2026 websites list PSUs that use GATE scores but do not say which paper each one takes. For live drives, see PSU recruitment through GATE.

How should you prepare for GATE PI alongside a job search?

PI is a small paper with a high bar: 3,547 to 3,725 candidates wrote it each year from 2024 to 2026, and its general cut-off was 30.5 or more in every one of those years. The last three PI papers had 195 questions worth 300 marks. Skill-Lync has solved 184 of them (284 marks) by subject, each checked against the official key. Marks per subject over the three papers, highest first: Casting, Forming and Joining (44 marks, 28 questions), General Engineering (44 marks, 30 questions), Machining, NTM, CNC and Robotics (41 marks, 24 questions), Operations Research and Operations Management (39 marks, 26 questions), Engineering Mathematics (34 marks, 24 questions), Metrology, Quality and Reliability (30 marks, 18 questions), Industrial Engineering (22 marks, 14 questions). General Aptitude is on the PI General Aptitude page (20 questions from 2024 and 2025); the 2026 PI aptitude section was the same 10 questions as Electrical's (same session) and is solved on the GATE EE General Aptitude pages. The one question left over was marks-to-all in the 2024 key. The GATE PI subject-wise weightage page has the split per year, and the GATE 2027 PI syllabus page shows what IIT Madras changed for 2027. If you are applying for manufacturing or design jobs in the same year, Skill-Lync's Siemens NX and plastic and sheet metal design hubs compare the programs we run there.

If you want help choosing between GATE preparation and a skills program, talk to a Skill-Lync counsellor using the form below. The raw-score calculator works out your marks from a response sheet once the 2027 keys are out.

What changed in GATE 2027 so far

Every official change to the GATE 2027 schedule, newest first. Skill-Lync updates this page on the same URL when IIT Madras posts a new notice.

  1. Application data correction window (with fee) opened, 10 to 14 Nov 2026.
  2. Information brochure revised (version dated 17 Oct 2026).
  3. Registration portal closed after the special window.
  4. Special registration window announced: 15 Oct 10:30 AM to 16 Oct 10:29 AM, with late fee. Rectification of scrutiny defects opened (now open until 30 Nov 2026).
  5. Late-fee registration extended to 12 Oct 2026.
  6. Regular registration (no late fee) extended to 5 Oct 2026.
  7. Application portal went live (planned 14 Aug, then 27 Aug).
  8. Registration rescheduled to 27 Aug 2026, closing dates moved.
  9. GATE 2027 website, poster and brochure v1.0 released; new Robotics and Automation (RA) paper; syllabi revised.

Official sources for this page

If an official notice differs from this page, the official notice is right. Dates marked TBA have not been announced by the organising institute yet; we don't guess them.

GATE prep and a core engineering career

Talk to a counsellor.

Ask about Skill-Lync's FEA, CFD, EV, embedded and BIM programs, and how they fit around GATE preparation.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.