GATE Electronics (EC): Calculus, Vector Calculus and Differential Equations (Engineering Mathematics), previous-year questions solved, part 3

Part 3 of 3 of the Calculus and Differential Equations hub: 5 more official GATE EC questions on differential equations, each solved step by step and checked against the official answer key. Part 1 covers series and convergence, maxima, minima and bounds, multiple integrals and areas and vector calculus: gradient, line, surface and flux integrals.

Questions from official GATE EC papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 18 Nov 2026 · 5 of 21 questions on this page

GATE 2022 · EC · Q.25MSQ · 1 markDifferential equations

Which (xi, eta) make f(x, y) = exp(xi x + eta y) solve a f_xx + b f_yy = f, a and b distinct and positive?

Consider the following partial differential equation (PDE)where and are distinct positive real numbers. Select the combination(s) of values of the real parameters and such that is a solution of the given PDE.
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) and (B) Official key: A,B

  1. Try . Each derivative just multiplies by the exponent's coefficient: and .
  2. Put these in the PDE: . Since is never zero, divide by it to get the condition .
  3. (A): . Works.
  4. (B): . Works.
  5. (C): (then , and the right side would need ). Fails.
  6. (D): . Fails.
  7. Options (A) and (B) are solutions.

Trap: option (D) looks natural because each term on its own is made equal to , but the two terms add, so the left side is , not . Another slip is to treat the PDE as first order, , and no option then works. The code substituted all four options into the PDE with sympy (positive symbols , ): the residual is for (A) and (B), for (D) and for (C). It also checked each option by central differences at random distinct pairs and got the same set. The exponent in the printed paper has a blank where should be (a PDF glitch), so it is read as , the only reading under which the options make sense.

Where this shows up in industry

Plane-wave solutions e^(jkx) of a second-order PDE and the condition on the constants that makes them work (a dispersion relation) are how field and signal problems are solved in electronics: the same substitution gives the relation between omega and k for a waveguide mode or a diffusing carrier density in a semiconductor.

GATE 2022 · EC · Q.30MSQ · 1 markDifferential equations

Which functions solve the wave equation f_tt = 10000 f_xx (Gaussian pulses, exponentials, sinusoid, complex exponentials)?

Consider the following wave equation,Which of the given options is/are solution(s) to the given wave equation?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) and (C) Official key: A,C

  1. The equation is with , so . Its solutions are for any twice-differentiable and (travelling waves in the two directions, both at speed ). The equation is linear, so a sum of solutions is a solution.
  2. Check one term : , so , and . Hence . The same works for .
  3. (A): is and is . Solution.
  4. (B): is fine, but is a function of , a wave of speed . Check: against . Not a solution.
  5. (C): is and is . Solution (the pieces need not be pulses or have the same shape).
  6. (D): has and , so , not . Check: but . Not a solution; the second term has the same problem.
  7. Options (A) and (C).

Trap: option (D) looks like a plane wave, and (B) looks right because the first term is. Both fail because the wave speed in the exponent is not : in (B) the second term moves at , in (D) the complex exponentials move at . The code substituted all four options into with sympy (zero for (A) and (C) only; the single terms and the (D) exponential leave non-zero residuals) and confirmed (A), (B), (C) numerically with central differences at a test point.

Where this shows up in industry

This is the wave equation of a lossless transmission line or a plane wave in free space, with c the propagation speed. A pulse of any shape travels as g(x - ct) with no distortion, which is why a lossless line carries a signal edge intact and why the phase velocity omega/k must equal c for sinusoids on it.

GATE 2024 · EC · Q.11MCQ · 1 markDifferential equations

Which differential equation has complementary function y(t) = (At + B) e^(-2t)?

The general form of the complementary function of a differential equation is given by , where and are real constants determined by the initial condition. The corresponding differential equation is ______.
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. The complementary function solves the homogeneous equation (). A term together with is what a repeated root produces: a double root gives .
  2. The characteristic polynomial is therefore .
  3. Read it back as a differential equation: , option (A).
  4. Check by substitution: , , . Then .

Trap: (C) has roots and (D) has roots . Both contain , so they look right, but with two different roots there is no term. (B) has roots , an undamped oscillation. The code substituted with symbolic , into the left side of each option with sympy: only (A) gives exactly . It also computed the characteristic roots: (A) , (B) , (C) , (D) .

Where this shows up in industry

A repeated root at s = -2 is a critically damped second-order system: the fastest settling without overshoot. It is the target for many second-order filters and for the step response of a well-damped RLC network or a servo loop, and the t e^(-2t) term is what distinguishes it from an overdamped case.

GATE 2025 · EC · Q.32NAT · 1 markDifferential equations

Maximum of y(t) on [0, 1] for t^2 y'' - 2t y' + 2y = 0 with y'(0) = 1 and y'(1) = -1

The function satisfieswhere and denote the first and second derivatives of , respectively.
Given and , the maximum value of over is ______ (rounded off to two decimal places).

Answer: Official key: 0.25 to 0.25

  1. This is an Euler (Cauchy) equation, : every term has the power of equal to the order of the derivative. Try .
  2. Then , that is , so or . The general solution is .
  3. Differentiate: .
  4. .
  5. , so .
  6. So . Set to get , which is inside . Since it is a maximum. (The ends give .)
  7. .

Trap: it is easy to write , forgetting the factor from differentiating . That gives , and a maximum of , outside the key. The code checked by sympy substitution and against sympy's own dsolve. It also solved the problem numerically: RK4 integration backward from with and a bisection on the unknown so that reaches near gives and a maximum of . A -point grid scan of on gives .

Where this shows up in industry

Euler equations with a power-of-t coefficient appear when a problem has a scale-free (radial) structure: the radial part of Laplace's equation for a cylindrical or spherical electrode and the field near a conducting wedge are solved with exactly the trial y = t^m. The method here, find the general solution and then fix the constants from boundary values, is the same one used for a transmission line with given end conditions.

GATE 2026 · EC · Q.11MCQ · 1 markDifferential equations

Find A in the system w' = A w, w(0) = (1, 1), given the solution w(t) = (e^t, e^(-2t))

Consider the differential equation , with .
If be the solution to the equation where and are unit vectors along the positive x and y axes respectively, then which of the following options is the correct matrix representing ?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. In components, and . At both are , so the initial condition is consistent.
  2. Differentiate: and .
  3. In matrix form . The two equations do not mix, so is diagonal with the exponents and on the diagonal.
  4. Why this is the only one: at , and at the same must hold for . Two independent vectors fix a matrix completely.
  5. Option (A).

Trap: option (B) is with both signs flipped; it gives and , a mirror image of the required solution. Options (C) and (D) have eigenvalues and give oscillations, not real exponentials. The code integrated from to with RK4 ( steps) for every option and compared with : only (A) matches, while (B) ends at . It also solved from the solution at and and got exactly .

Where this shows up in industry

A state-space model w' = Aw is how a linear circuit or control loop is written down; the eigenvalues of A are the exponents of its natural modes, so reading them off a measured response (here 1 and -2) is a system-identification step, and a positive one means an unstable mode that grows like e^t.

From GATE prep to a electronics modelling and simulation career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.