Wiring harness routing & packaging Rules Week 3 Challenge

 Q1. Defining P-clamp as Electrical support using Electrical part design workbench.

1. Define two points, one as entry and another as exit point.

2. Create plaes at the two points and one more at the base.

3. Switching to Electrical part design

4. Click on Support Defiition-> Select part -> Select entry point -> Select entry plane, exit plane and base plane.

5. Once again click on support definition -> Select part-> Select exit point -> Select exit plane and base plane will be automatically define as it is selected in previous step.

Q2. Defining Back Shell using Electrical Part Design Workbench

1. Defining Backshell Entry point.
2. Creating axis system for back shell entry.
3. Creating bundle connection point.
4. Switching to Electrical part design.
5. Define part electrically as back shell.
6. Define back shell connection point.
7. Define bundle connection point.

Q3. Creating Corrugate tube and adding them to catalogue under Slit COT family

1. create a new part document
2. switch to electrical part design
3. Select Define protectionn part
4. Click on part or file name
5. Provide the given parametes as Inner Diameter, thickness and bend radius as 1.5 times of Outer Dia

Catalogue Creation:

1. New part -> Catalogue document -> Add family -> Enter name -> Select Conduit -> save
2. Open part to add catalogue -> Store Device command-> Select catalogue -> Select family as Slit COT -> ok.