Week 11 - Final project

this is door trim panal we create solid and create flanges and heat stakes and dog house

this the lower substitution first we create class a to offset 2.5mm thicknes this is class c after we creaate class b use sweep comand swep it both sides class a classb classsc trim it after after we go to part work bench we use close surface finally we get closed body and create ribs the sketch and pad it aafter unoin trim it all ribs aftre we crate the dog house the lower substion and drafting the dog house

this is map pocket and it is create also solid same process we create classs a classb and classc

and trim it in this mpapocket gives mastersection we flanges and create holes aftrewe create we create heat stakes

this door arm rest same thing we create solid boby this door arm resst also given the master section

we create the flanges to given master section afteer create the holes and create the heat stakes it

and it union trim

this also one of the mappocket we create the flanges we create s holes and createe the heat stakes

and union trim and ribs creates

finally we coplete the door tri panal finallproject