2D Detailing

AIM :

To study about the various design aspects regarding BIW fixtures.

OBJECTIVE :

• To create 2D Drawing for each Clamp Units with all child parts and also create Child pard drawing for the same for the Fixture assembly created earlier.
• To create 2D Drawing for each Pin Units drawings with all child parts and also create Child pard drawing for the same for the Fixture assembly created earlier.

DRAWING RESULTS :

P001_Z01_ST010_03_01_00_CLAMP_UNIT

P001_Z01_ST010_03_01_01_REST_MYLAR

P001_Z01_ST010_03_01_02_CLAMP_MYLAR

P001_Z01_ST010_03_01_03_RISER

P001_Z01_ST010_03_01_04_SHIM

P001_Z03_ST010_03_02_00_CLAMP_UNIT

P001_Z03_ST010_03_02_01_REST_MYLAR

P001_Z03_ST010_03_02_02_CLAMP_MYLAR

P001_Z03_ST010_03_02_03_RISER

P001_Z03_ST010_03_03_00_CLAMP_UNIT

P001_Z03_ST010_03_03_01_REST_MYLAR

P001_Z03_ST010_03_03_02_CLAMP_MYLAR

P001_Z03_ST010_03_03_03_L_BLOCK

P001_Z03_ST010_03_03_04_RISER

Swivel Clamp Unit

P001_Z01_ST010_04_01_00_CLAMP_UNIT

P001_Z01_ST010_04_01_01_REST_MYLAR

P001_Z01_ST010_04_01_02_CLAMP_MYLAR

P001_Z01_ST010_04_01_03_CLAMP_ARM

P001_Z01_ST010_04_01_04_BLADE

P001_Z01_ST010_04_01_05_RISER

P001_Z01_ST010_04_01_09_SHIM

P001_Z01_ST010_04_01_LOCATORS

P001_Z01_ST010_04_02_00_CLAMP_UNIT

P001_Z01_ST010_04_02_01_REST_MYLAR

P001_Z01_ST010_04_02_02_CLAMP_MYLAR

P001_Z01_ST010_04_02_03_CLAMP_ARM

P001_Z03_ST010_04_02_04_BLADE

P001_Z03_ST010_04_02_05_RISER

P001_Z01_ST010_04_03_00_CLAMP_UNIT

P001_Z01_ST010_04_03_01_REST_MYLAR

P001_Z01_ST010_04_03_02_CLAMP_MYLAR

P001_Z01_ST010_04_03_03_CLAMP_ARM

P001_Z01_ST010_04_03_04_BLADE

P001_Z01_ST010_04_03_05_RISER

P001_Z01_ST010_04_04_00_CLAMP_UNIT

P001_Z01_ST010_04_04_01_REST_MYLAR

P001_Z01_ST010_04_04_03_CLAMP_MYLAR

P001_Z01_ST010_04_04_05_CLAMP_ARM

P001_Z01_ST010_04_04_06_BLADE

P001_Z03_ST010_04_04_07_RISER

P001_Z01_ST010_04_05_00_CLAMP_UNIT

P001_Z01_ST010_04_05_01_REST_MYLAR

P001_Z01_ST010_04_05_03_CLAMP_MYLAR

P001_Z01_ST010_04_05_05_CLAMP_ARM

P001_Z01_ST010_04_05_06_BLADE

P001_Z03_ST010_04_05_07_RISER

P001_Z01_ST010_04_06_00_CLAMP_UNIT

P001_Z01_ST010_04_06_01_REST_MYLAR

P001_Z01_ST010_04_06_03_CLAMP_MYLAR

P001_Z01_ST010_04_06_05_CLAMP_ARM

P001_Z01_ST010_04_06_06_BLADE

P001_Z03_ST010_04_07_07_RISER

P001_Z01_ST010_04_07_00_CLAMP_UNIT

P001_Z01_ST010_04_07_01_REST_MYLAR

P001_Z01_ST010_04_07_03_CLAMP_MYLAR

P001_Z01_ST010_04_07_05_CLAMP_ARM

P001_Z01_ST010_04_07_06_BLADE

P001_Z03_ST010_04_07_07_RISER

Pin Unit

CONCLUSION :

• The required 2D Drafting sheets were created.
• Necessary images and files were attached.