Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

1)

AIM: To use the structural project file developed by us in the week 6 to 8 to export the Revite Architecture and structure model to Nvisworks Cache file.

TOOLS USED :

• File
• Export
• save
• NWC
• Navis work

PROCEDURE:

STEP-1: Open the Revite and open the file which you have saved in the week 6 to 8 and go to file then export , NWC and save the file as NWC Format.

STEP-2: Now the exporting work get finished.

Step-3: Now the Revit file gets opended in the Naviswork.

RESULT: In this way we can export the any type of Revit file either it is structural or Architectural in to the Naviswork and we can save them as Naviswork file

2)

AIM: Using the Navigate tool to walk around the model and walk though the rooms created and record our movings as animation in our Navisworks file.

TOOLS USED:

• Naviswork
• viewpoint
• save view point
• Record
• stop
• walk

PROCEDURE:

Step-1:Open the Architectural file which we have exported as Navis catche file in to Navismanage then go to view point tool and select save view option

Step-2: Save the view with appropriate names as requied

Step-3: Now select the walk tool and click cursor or keybord front, left arrow to start the wal.

Step-4:Now go to the save view paoint and click on record and stat walking to the direction which you need the view and click on stop to stop the record

RESULT: We have successfully used the Navigate tools to walk around the model and though the rooms created and records our moved with the help of above steps.

3)

AIM: To use the Navigate tool to use Realism feature to walk thugh the model and record your movings as animation in Naviswork file.

TOOLS USED :

• Naviswork
• view point
• save view point
• Record
• stop
• walk
• stop
• walk
• Realism

PROCEDURE:

Step-1:Open the Architectural fle which we have exported as Navis cache file in to Navismanage the go to view point tool and select save view option.

Step-2: Go to the Realism and select the third person otion and walk though the rooms and around the building and save the points

Step-3: Go to view point and start the record and wlk though the rooms or view which you need to view with the help of cursor or key board arrows

RESULT: With the help of above steps we have use the realism fature and walked though the rooms and around the building and record the movings successfully

4)

AIM: To create a clash detection test between the Architectural and structural model.

TOOLS USED:

• home
• open
• clash detection
• runtest
• Append

PROCEDURE:

step-1: Open the Revite and save both Architectural and structural file as NWC and oprn them in Naviswork manage.

Step-2: open the Architectural file and append the structural file to it both the file got merged .

step-3: click on clash detective in the home tab.

step-4: A clash detective dialough box appers

Step-5: click on add test and select the file in which you need to detect the clcik on run test.

C) The clashes ae visible in red colour we can appro clashes which are perfect ehrn we see the images. the colour turns to gren

d) We can neglect the clashes which will not cause any distrubance to the project

e) We can resolve the clashes which can change the boundary conditions we can exclude these clashes from detective test.

f) Once the clashes are mentioned we can save the file by selecting save as.

g) Now we can annotate and save the place where we can see the clashes and can viewed personally and will be rectified.

RESULT: With the help of above steps we can able to detect the clashes in the model and we can resolve the problem and we can send the file to the design engineer.

5)

AIM: Using the Timeliner feature in Navisworks and prepare a schedule for a project developed in week 6 to 8 by adding reasonable assumpution foe task start date and stimulate the task completion as a visual simulation. Record it and save the timeliner simulation to Navisworks file.

TOOLS USED:

• Home
• Timeliner
• selection tree
• add tak
• stimulate

PROCEDURE:

Step-1: Open the structural file in the naviswork manage

step-2: click on the timelinr in the home

step-3: The Time liner box appers in the bottom. Click on selection tree to select add them to the time liner.

step-4:click on add tsk and go to attach and select the items in the selection tree.

step-4:we can add the actual and planned start and end dates

step-5: after finishing filling all he details in the timeliner click on the stimulate.

RESULT: With the help of above steps we can prepare a scheule for the project developed in week 6 to 8 by adding resonable assumptions like task start date and end date and stimulated the task completion as a visula simulation and recorded it and saved the imeliner simulation to naviswork file successfully.