Project - Analysis of a practical automotive wiring circuit

1, major elements 

   battery, starter, distributor, regulator, generator, circuit breaker

2. purpose any three elements 

    STARTER;

              Helps to starts the engine by giving initial rotary motion to the engine which leads to cranking later

   DISTRIBUTER;

             Distributes the voltage accordingly to the spark plugs to spark at the right moment to proceed combustion in the engine

   CIRCUIT BREAKER;

           Detects any potential leakage in the system and cuts off the potential flow by opening the circuit

3. If the total load is 10A from the battery then the fuse rating must be a bit higher than like 12A,13A.

4. lOAD =500W  

    P=500W

    V=48V

    I=10.4A

5. PLATC light and Taillight is connected in parallel and they are connected in parallel because the voltage potential flowing would be the same for PLATC and Taillight 

6. Regulator and Generator is connected in series, the regulator must regulate voltage and current from the incoming potential from the battery and give it to the generator so they are connected in series