Creating Walls, Partition walls and Floors for a residential layout using REVIT

1. Aim       To set the shared coordinates and project base point  Steps  Open new architecture template in revit software Set horizontal and vertical grids Tap manage in architecture ribbon Then select project location Then specify shared coordinates Then type VG, then select site in VG box…

1. Building codes are essential for modelling / efficiency of drawings in REVIT for the following reasons A set of standards which is uniform for all standards It ensures and protects the construction safety Promotes Modern Construction Methods Provides building codes and guide lines 2. National Building Code Lists of…

1. Ceiling at first floor level  Aim  To create the ceiling at first floor level Steps Open the project created in week 3 Select the first floor in floor plans Then in architecture tab, tap ceiling option then select sketch ceiling, then select pick a line Then select the outer line of the wall  Then tap…

1. Edit floor type and thickness AIM  To edit the floor type and thickness as mentioned in the challenge Steps Select the Architecture tap flooring Then flooring ribbion tab under modify select pick a line Then select the outer line of the layout as boundary  Then finish flooring Then in properties tap edit type…

1. BIM, Features and Benefits BIM stands Building Information Modelling, It is an 3D modelling facility to provide all information through out the lifecycle of the structure from planing to all construction phases BIM is the visual representation of physical and functional charaterisitcis of the facility from inception…

1. Aim : To create the new project in  file menu Steps  Open revit sofware Start page tap new project then select imperial - structural template then once the model was loaded tap file and save the project as challenge 1 Result 2. Aim : To close and open project file using tool bar Steps  Save and close…

Aim  To create 3d residential building and rendered view Steps Draw the floor plan of villa of 3bhk Draw the elevation plan of villa  Create layers 3dwall, 3ddoor frame, 3d door, 3d windoe glass, 3d window mulions, 3d window frame, 3d stairs By using command boundary, create region of 3d wall, 3d door frame,…

1. 3D isometric view of buildingTo create the isometric view of the given buildingSteps Draw the floor plan, elevation of the building with given dimensionCreate the layer such as 3d wall, 3d window frame, 3d mulions etcSelect the wall in floor plan by using the command boundary create the region inside the boundaryThen…

1.3D FURNITURE ELEMENT AIM To create the 3d element as shown in challenge STEPS Open autoCAD new drawing in setting switch to 3dmodelling Select solids in ribbon then select box Set origin create box of dimension x = 3', y = 2'6'', z = 2'6'' 3d solid will be created Then select shell, then select remove face, then select…

1. FLOOR PLAN AND SECTION LAYOUT AIM  To create the floor plan and section layout as shown in the challenge Steps  Open the floor plan and section drawing which drafted in challenge 7 Go to layout tab, do right click, then select the  templete In template tab select Tutorial-mArch template Then layout will…

1. KITCHEN LAYOUT AIM   To create the kitchen layout as shown in the challenge Steps Create the outline by using command Xline and offset  Create the partitions for cubboard and all the chambers by using command offset Hatch the layout as shown Give name by using command Mtext Give Dimesnions Align layer…

AIM  To create the title block as given in the challenge Steps To create the title block, check the title block size standard Assume the paper size as A4 (11'' x 8.5'') Assume title block size 1/4th of the length Draw the margin for the titel block By using line command and Mtext command draft the title block as given…

PROJECT AIM  To create the architectural plan, and relavant structural plan for the gicen plot size STEPS 1. Architectural drawing Draft the outline of the building with the plot size L=60', W=20'  by using command Xline vertical and horizontal Draft the walls by using command offset 9'' for external walls and…

1. 1ST, 2ND & 3RD FLOOR PLAN AIM: To draft the Floor plan as given in the challenges Steps Give Xline command - create horizontal and vertical lines assume external wall of 230mm and internal wall 150mm Give Offset command - create lines as per each room specification(For eg. give offest distance x direction 3100 and…

1.Wardrobe Aim  To draft the wardrobe drawing as shown in the challenge Steps Command Line, Offset - draw the wardrobe outline, and sections as per the provided dimensions Command Trim - modify the section wherever it is required Command Hatch - hatch the door Tap Dimension from the ribbion- Manage dimension style…

1.COLUMN SCHEDULE AIM   To create the column schedule as provided in the challenge Steps By Line Command - create table as shown By Dtext Command,  specify roans.shx, height-8'', justify - left and type the details as shown Draft column section by using line, circles RESULT 2.WINDOW SCHEDULE AIM  …

1. Residence Plan Aim : To draft the floor plan as provided in the challenges Steps Open new drawing set imperial Units command - Engineering  Set Limits by Limmax - give coordinates Xline - horizontal then vertical Trim - extends behind lower left end Offset line- 9'' for external wall, 4.5'' for internal wall Offset…

1.  AIM   To recreate the provided drawing using auto cad software Steps Open new drawing in autocad Set decimal in advanced setup and finish it by givng next steps Line command specify a point then move cursor in x axis and then specify 2 units Line command specify the last point then move cursor in negative…

1. C.S. OF LOAD BEARING WALL OVER SPREAD WALL AIM   To create the cross section drawing of load bearing wall over spread wall by refering the provided drawing Steps Refer the provided drawing i.e., footing section with load bearing wall along with steps on the sides and its dimensions Draw rectangles for the…

Aim  To Create Geometries using all co ordinate system Steps followed     Step 1 - using UCS command fixing 0,0 for x and y axis     Step 2 - using line command specify the origin point     Step 3 - drafting line by using @ coordinate system specifying x, y dimensions and angles …

AIM To sketch G+1 villa accoridng to vastu sastra and calculating the live load, dead load and wind load for the villa find the attached sketch of the villa in which was designed according to vastu sastra recommended directions Entrance - North Living room - North west Pooja room - North east Guest room - East Bathroom…

Mix Design Grade M35 Data Collection (Assumed) Supervision = Good Exposure    = Severe Minimum Cement Content = 320Kg Specific Gravity of Cement = 3.15 Specific Gravity of Fly ash = 2.20 Specific Gravity of Coarse Aggregate = 2.74 Specific Gravity of Fine Aggregate = 2.74 Specific Gravity of Chemical Admixture…