Challenge

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

ANS 1 AIM : TO CREATE A SET OF SINUSOIDAL POINTS, A CURVE AND A SURFACE OUT OF THE CURVE USING DYNAMO .

PROCEDURE

Initially , open the architecture template of revit software and go to manage tab .
In manage tab select dynamo
Then dynamo window opens and then go to new option .
Now , start the process by inserting three integer slider .
This can be done by typing code block in the library search panel .
One block is named start ( value -5 )
Second one end ( value -300)
Third one step (value-1)
Now type search range panel of the library and insert it .
Now search points by coordinate in new search pannel
Then , connect the range block to the X coordinate of the point by coordinate block .
Now we have to produce sin wave out of these points for which we have to insert sin function which is given by math sin option in the library
This , amplifier code block needs to be multiplied to the sin block
For this search product function in the library
input for X value is sin block and for Y value is amplifier
Next ,We have to provide Phases for the sin curve
So , gain insert an integer slider and name it as phases
now , this is then connected to the y coordinate of the point by coordinate blocks
Now copy this entire bl;ocks two times to create surface
Then connect all the output of the sin curves as input for the list
This will serve as the input for surface by loft block .
Hence the surface is developed out of the curve .

RESULT : A SET OF SINUSOIDAL POINTS HAVE BEEN CREATED AS FOLLOW

ANS 2 AIM : TO CREATE A CONCEPTUAL LAYOUT OF A FLOOR PLAN IN DYNAMO

PROCEDURE :

Open a new architeectural template . go to manage tab and open the dynamo---> new
Inorder to create the wall first we have to create four control points
For this , search points by coordinate in the search panel of the library
1st one is named as origin ( 0,0,0) and the rest is named as control point 1( X,0,0) , control point 2 ( 0,Y,0) and control Point 3 ( X,Y ,0)
Now proviide two integer sliders to provide the values for x and y
Now , we have to connect these points by a line .
So for this , search line by start and end point and insert 4 blocks
Now , search wall in the pannel and choose wall by curve and height
for curve , combine all thew four lines in a list by choosing list create
For height , another number slider is choosen and name it as height
For wall type , search wall type in the panel and it will display the wall display the wall types linked in the revit file .
Now , go to the revit file to view the 3D form where the height of the wall is visible .
The height of the wall can be adjusted using the slider
Now , we have to place the floor .
This can be viewed in 3D view in revit File

Result : Hence the conceptual floor plan layout has been developed.

ANS 3 AIM : TO CREATE AN ARRAY OF MODEL ELEMENTS IN REVIT /

PROCEDURE :

open a new architectural template in revit file
now , similary 16 columns are created .
The preoject of the model elements are varried using dynamo.
Now open dyanmo
In the search pannel of the library search select model elements , inteeger slider and set rotation .
The intezer slider is renamed as rotation angel >
The rotation angle can be varied to desired value

RESULT : THE ARRAY OF MODEL ELEMENT HAVE BEEN CREATED AND THEIR PROPERTIES ARE BEING VARIED THROUGH THE BLOCKS CREATED IN DYNAMO .

ANS 4 AIM : TO CRAETE A CONCEPTUAL MASS IN REVIT AND DEVELOPED A PARAMETRIC COLUMN BY DIVIDING THE SURFACE .

PROCEDURE :

Open revit software and under the famiolies open a new --> conceptual mass --> mass .
Now , go to elevation view and create a level at 3.6m and name it as height .
Now using spline tool draw the desired outline for the walkway
Now we have to create a profile to sweep through the curve
For this , we have to set the workplane t the points and develop a polygon atb the workplan keeping the point as centre .
Now , a polygon is developed with point as centre
Now we have to create a surface which done through sweep
For this , Select all the polygons and the curve line and choose create form option
Now, select the entire form and then filter and retain anly the form
Now select the formand is give --> divide surface --> Then provide the pattern
Now Select the pattern as triangle bent
Then create a reference point at centre of the face
Now select the pattern , reference plane
Then in the pattern select the gfamily that we have create just now
Hence the conceptual mass have been created

RESULT : The conceptual mass have been created in revit and is given as

ANS 5 AIM : TO DEVELOPE A PARAMETRIC STADIUM USING DYNAMO REVIT

PROCEDURE :

Open a new architectural template in revit and then open dynamo
basic parameters to design a high rise structure is created as input in dynamo
Four intezer slidert is taken from the library for the following
number of levels
Floor to floor height
Bottom floor rotation
Top floor rotation
Now , connect the intezer slidser named as levels and floor to floor height as input to the code link
Then connect the code block as input for z coordinate in the coordinate by origin block
Now insert rectanglew by width and length from the library
Then connect the inputs for rectangle block
now We have to rotate the gemotry
NOw , we have to create surfavcce by loft in library
Hence , the parameters statiudn have been craeated

RESULT : THE PARAMETRIC STADIUM HAS BEEN CREATED AND IS GIVEN

Ship work like this
in your own course.