Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

AIM : TO CREATE

1. TEMPLATE , INSERTING TEXT AND ATTRIBUTES
2. DOORS OF WEARHOUSE AND PLACING IT IN BLOCKS
3. ELECTRICAL LEGEND AND MAKING IT BLOCK
4. DIFFERENT TYPE OF DOORS FOR RESIDENTIAL PROJECT
5. DRAWING BARS ,MAKING IT AS BLOCK AND MAKING IT AS A TABLE AS A BAR BENDING SCHEDULE

COMMAND USED :

1. Block
2. Insert
3. Attributes
4. Field
5. Rectangle
6. Line
7. Text
8. Array
9. Mirror
10. Copy
11. Offset

1)

AIM : CREATING TEMPLATE , INSERTING TEXT AND ATTRIBUTES

• CUSTOM 1-TITLE BLOCK
• CUSTOM 2 - TITLE BLOCK

PROCEDURE :

CUSTOM1 - TITLE BLOCK

• create a rectangle of size 66.63 and 158mm
• Divide it with line for the text box into columns
• For rows take offset of 5,10,5,5,8,30,15,15,20,20,10,15 mm
• By multiline text, type rev,description by date ,on the first row by text height 2.5 and style
• As repeated in the rows
• Againn , use multiline text and type the required text in caps with the text height 1.5 and style

CUSTOM2-TITLE BLOCK

Draw rectangle of 252 and 46mm with lines and divided the to the required rows and columns .

with the use of multiline text insert the following : height 2.5

creat a small rectangle at the right corner explode it , it create rows and columns

by attributes , create the text inside it.. command "ATT'' -attribute definition dialogue box appear

Insert the tag line - tag we are giving , visible before creating the block

Default : the value shown in drawing after making it as a block

Place the tag line on the place we need to hear 1st row 1st column of the box created . created attributes similar for the rest of the .the attributes created are

2) AIM :CREATING DOORS FOR WEARHOUSE AND PLACING IT IN BLOCK

PROCEDURE

DOOR 2330 X 2750

Create a rectangle of 2330 x 2750mm.

offset 50mm as a frame . 90mm for the left side .

by divide the top line into 4 segments . from the division point draw lines vertically to divide it into shutters.

offset 25mm on both sides for the thiicknness , delet the centre line .

create a rectangle to shown the poanels . offset 20mm from the 1st rectangle and offset 100mm from 2nd rectangle.

creat a panel as block ,so that it easy to copy .

creating block using command b

3) AIM : TO CREATE ELECTRICAL LEGEND

PRCODURE

SINGLE GANG SWITCH : draw a circle of 64mm with line and vertical line draw an inclined line veretical and horizontal line perpendicular to the inclined as required.

DOUBLE GANG SWITCH : Draw circle and draw two horizontal lines and a vertical inclined line

TRIPLE GANG SWITCH : Draw circle , 1 vertical incline line and three horizontal line .

SINGLE TWO -WAY SWITCH : Draw same as single gang switch and with donout command give internial dia as zero and for external diameter select it in the circle.

DOUBLE TWO WAY SWITCH : Draw same as double gang switch and create donout .

TRIPLE TWO WAY SWITCH : Draw same as triple gang switch and create donout .

SWITCH CROSS : Create a circle and donout insinde and with line command draw an inclined vertical and perpendicular horizontal.

SWITCH SERIAL : Copy the switch cross and delete two bottom lines , remove the donout also.

SINGLE SOCKET : Create a circle ,divide it into half and draw a line at the top .

SINGLE SOCKET FOR LAMP : From the single socket , draw a horizontal line perpendicular to vertical.

DOUBLE SOCKET : Draw the single socket and copy it to create same place it using snap on.

FLOOR SOCKET SINGLE : Draw a rectangle surrounnding single socket for lamp

FLOOR SOCKET DOUBLE : Create two single socket and place a rectangle surrounding it.

TELEPHONE SOCKET : Draw a triangle

4 AIM : TO DRAW THE DOORS OF RESIDENTAL PROJECT AND CREATE IT AS BLOCK

1. D1
2. D2
3. D3
4. D4
5. D5

5 AIM : TO CREATE BAR BENDING SCHEDULE AND INSERT IT AS BLOCK

1 DRAW EACH SHAPE

2 CREATE AS BLOCK

3 INSERTING IT IN TABLE AS BAR BENDING SCHEDULE

PROCEDURE

1) DRAWING EACH SHAPE

A-20MM

Draw a line of 750cm for straight bar . create arc on both side

B -16MM

Draw a line of 300mm of straight line . 41cm vertical line in 45 degree and again 139 straight line .

C-16MM

Draw 210 cm straight line and 41cm line in 45angle and 180 cm line again .

D 10MM

Draw a rectangle of 23 and 43 cm . fillet the corner with radius 5cm . draw two line of 120cm

insert this whole thing in a table and form a complete table.

RESULT :

Template is drawn and text and attritbute are inserted

Doors of warehouse are drawn and placed it in block

all things drawn according to instruction