Concept on positioning of Columns

Question-1. Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. Ans: Investigation of the framing plan with respect to symmetry in…

Question 1: A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration (T1 = 2 seconds) and…

  Objectives of the challenge: Impact of structural configuration in lateral stiffness Calculation of natural frequency Effective stiffness concept for group of members. AIM-1:Compute lateral stiffness of the one story frame with an intermediate realistic stiffness of the beam. The system has 3 DOFs as shown. Assume…

Question 1: A) Observation: Concrete crushed and the reinforcement is exposed. Concrete spalled beyond reinforcement which may be sign of rupture. Beam top portion looks safe beacuse of the flange advantage from slab. the crack develops from bottom to top means rebar yielding occurs in support bottom only. Solution: Its…

AIM-1: Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class INTRADUCTION:Navisworks is a 3D design review product from Autodesk.Used primarily in construction industries…

AIM-1: Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. INTRADUCTION:Dynamo is an open source visual programming language for Revit, written by designers and construction professionals. It is a programming language that allows you to type lines of code; while also…

  AIM-1: Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below INTRADUCTION: Using key points in revit to easy the process of drafting and design elements stractres PROCEDRE:   a. Using 3D model create a section box Open the revit application then open…

1) What are HVAC systems? Why are they essential in the modeling of buildings ANS:      HVAC stands for heat ventilation and air conditioning. HVAC systems are more used in different types of buildings such as industrial, commercial, residential and institutional buildings. The main mission of HVAC system…

AIM-1: Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School ANS: OFFICE BUILDING. AIM-2:  Assume reasonable assumptions for geographic and location…

AIM-1Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project: INTRADUCTION: Revit Structure is Autodesk's BIM software solution for structural engineering companies and structural engineers, that provides a feature rich tool set helping to drive…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? ANS:  A set of standards that are uniform  to all stracture to protect the constration sefety its help full in modern constraction sefety it provides standerd values for building consraction every country have…

AIM-1: Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level PROCEDURE: Now open previous drawing using open icon fron file tab in left of working scren select ceiling icon in architecture tab we get display editing…

  AIM-1:Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools ans.   it is a visual reprasentation of a the physical and functional chacterstics of a faciliting from inception onwards as such it serves a shared information reprasenting for collaboration througth a facuilitys life cycle.…

AIM-1&2: From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately. Save the new project file. Close and open using icons from file toolbar. INTRADUCTION:Revit is a building information modeling software used across many professions, including architects,…

AIM:Creating a 3D rendered model for a Residential Building in AutoCad INTRADUCTION: Draw a residential building using AUTOCAD application. autocad is designing and drafting software we cn do renderings also done by this software using commands in autocad, 2D COMMANDS: LINE CIRCLE RECTANGLE TRIM EXTEND POLYLINE ARC MIRROR…

AIM-1: . Create a 3D Isometric View of the building with plan and elevation given. PROCEDURE: STEP-1: Open new drawing file in autocad set units as engneerig and set dimentions in inches 0'0". set limmax as 50',50'. set the display as in 3d modeling.   step-2: select the line command and draw the lines in required…

AIM-1:Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing by autocad. INTRADUCTION: Draw any furniture element in mathamatical repramentation by a software that autocad  if the furniture element made in 3dimention by the help of different commands by this software. this software…

AIM:Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

 AIM: Create the Kitchen Layout as shown in the Figure below. Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. All dimensions are in mm. PROCEDURE: STEP-1: Select units as a millimeteres and decimals 0.0 set the limmax as a 100m,100m fant style as arial in…

AIM:  Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock,…

AIM:Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan) PROCEDURE:…

AIM:Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. PROCEDURE: STEP-1: open the new dwg document file take the units…

AIM: Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm. PROCEDURE: STEP-1:…

AIM : Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left PROCEDURE: STEP-1 create new file < select new drawing enter units…

AIM: To draw the given drawing residential plan in a autocad software. PROCEDURE: Step-1: select new drawing from ribbon. enter units and select ENGINEERING and deciamal value in 0'0" take xline command and draw vertical and horizontal lines in 1,1 point with useing offset command draw a 9" dimenssional lines…

AIM 1: To draw the given drawing in autocad. PROCEDURE: Step:1 select new drawing from ribbon. enter units and select DECIMAL and deciamal value in o.o select pline command and enter value 1st point @3<0 enter @2.1<45 from anti-clockwise enter @2.8<135  enter value @2<180  and close pline command…

1.useing commands : line , rec command : rec 0.90,0.25 make a rectangle value of : 0.90,0.25 make anotherone plae on the before one:0.40,0.50 make anotherone plae on the before one:0.40,0.40 make anotherone plae on the before one:0.60,1.6 make a plane object beside of 0.60,1.6 object :0.15,1.15 afet that make a steps on…

AIM: TO PRepsre a  G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding…

AIM: Calculate the Concrete Mix Design for M35 grade concrete with fly ash. INTRUDUCTION :Concrete ix design systemetic process of coosig economical relative prapotion of various ingredients from availabile material that gives the concrete of desired workabilty.the process of selecting suitabile ingredients for producing…