AIM : TO DRAW A 60' X 20' RESIDENTIAL BUILDING WITH THE FOLLOWING DRAWINGS 1) ARCHITECTURAL DRAWING PLOT DRAWING FIRST FLOOR PLAN ELEVATION VIEW GROUND FLOOR PLAN 2) SECTION VIEW OF A STRUCTURAL DRAWINGLAYOUT FOOTIGSECTION LAYOUTA BEAM LAYOUT Vastu Shastra Followed Entrance of the house is provided at the North-East position.…

Aim: To Create the Kitchen Layout and to  Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. All dimensions are in mm. Procedure: step 1: units are set to mm limits and limax are also set zoom comand is also used How to create a below-counter plan in steps Launch…

    Commands used:  Block. Insert. Attributes. Field. Rectangle. Line Text. Array. Mirror. Copy. Offset. 1) Aim: To Create Custom1_titleblock and Custom2_titleblock using Attributes and block command from Autocad software . Custom 1_ title block: Create a rectangle of size 66.63mm and 158 mm  Divide…

AIM: To Create a layout of the plan and section A of the project in challenges 7 . PROCEDURE:  In the command prompt type units > mm> decimal In the command prompt type limax >100,100 In the command prompt type limits>0,0 Draw a rectangle of size 400x455 and 375x445 for creating the viewport. In the command…

     AIM: To create a 3D Furniture element as given in the figure and need to assume dimensions which are missing in the drawing.    INTRODUCTION:- The three dimensional furniture element was drawn in the autocad using the different tools in the autocad. 3D models are widely used anywhere in 3D graphics and CAD. Their…

1. AIM: Create a 3D Isometric View of the building with plan and elevation given. PROCEDURE: Open new sheet and change the Units from metric to engineering precision 0’-0” ENTER. Using commands : Line Rectangle Copy Offset Join Boundary Extrude Presspull Union UCS 3Drotate Create the plan with Line command in top view…

Aim: To create a 3 dimensional model of the residential building with a rendered view in AutoCAD. Introduction: The process of rendering involves using 3D objects in a scene to produce a raster picture. A renderer is used to determine how lighting and shadows are computed depending on the placement of lights in a scene,…

Aim: To model a ceiling above the architectural plan created.     Procedure: Click the project created. Click the first floor in plan view. Click the ceiling from the architectural tab. Click the sketch and select pick lines select the exterior wall faces Click ok.      Create a ceiling above the Click terrace by sketching.…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Over here I decide to choose Multi-Unit Residential Apartment.   2) Assume reasonable assumptions for geographic and location details for your project modeling.…