Switch Bezels:   parts which contains switches and controls for different functions like Window control, Door lock/Unlock,Media and Temperature control OBJECTIVE: The objective of the project is to design the switch bezel and to do a draft analysis for it by creating the required tooling direction with the help…

  Tooling Axis: Tooling Axis is the direction in which the Mold opens and closes. Part Drafts are given along this axis.   MATERIEAL SELECTION : Material:ABS Plastic(Acrylonitrile Butadiene Styrene)     Key Properties of ABS High rigidity. Good impact resistance, even at low temperatures. Good insulating properties. Good…

COIN HOLDER To create a coin holder plastic component by closed method with reference to the class A surface and do the draft analysis for the component. OBJECTIVE: The objective of the project is to design the coinholder and to do a draft analysis for it by creating the required tooling direction with the help of Bisecting…

BUMPER:        A bumper is a structure attached to or integrated with the front and rear ends of a motor vehicle, to absorb impact in a minor collision, ideally minimizing repair costs. OBJECTIVE: The objective of the project is to design the PUMBER and to do a draft analysis for it by creating…

Aim: To Create the Door trim lower component through the given Class-A surface. Objective:      The main aim of this challenge is to create a solid body of 'Door Trim Lower' with the help of the closed surface method by using the 'Generative shape design' workbench in CATIA V5. Performing the 'Draft Analysis'…

AIM:-       To create the Dog House for the Door Trim. DOG HOUSE:-      Dog HOuse is an engineering feature used in plastic trim design.Dog houses are used as supporting feature. The primary function of Dog House is to avoid SINKMARK. MATERIAL FOR DOG HOUSE    …

Aim: Create the A Pillar Plastic component through the given Class-A surface and master section and perform Draft analysis. Objective:      The main aim of this challenge is to create a solid body of 'A PILLER' with the help of the closed surface method by using the 'Generative shape design' workbench in…

 AIM           TO Create Rib and Screw boss for the door handle considering design rules Objective:          The main aim of this challenge is to create B-side features of the 'Door Trim', with the help of CATIA V5. Procedure for the projects Creating the tooling…

TOOLING AXIS   The direction in which the mold or core and cavity opens is the tooling axis. Steps Followed: Tooling Axis creation. Checking Draft analysis for created tooling Axis. Creating parting Surface. Creating Core Side. Creating cavity side. CORE  A core is a device used in casting and moulding processes to produce…

Objective The objective of this project is to model a butterfly valve and apply GD&T to the different parts and assembly of the butterfly valve.  Introduction A Butterfly valve is a quarter-turn rotational motion valve, that is used to stop, regulate, and start a flow. Butterfly valves are easy and fast to open.…

BENCHMARKING Benchmarking is the practice of comparing business processes and performance metrics to industry bests and best practices from other companies. Dimensions typically measured are quality, time and cost. Also referred to as "best practice benchmarking" or "process benchmarking",…

Automotive Underbody Coatings Underside of vehicles serves as an intermediate between metal components of a vehicle and outer environment. Underbody of vehicles is prone to damages due to harsh environmental conditions. Coatings are applied to the underside of vehicles to protect them against factors such as corrosion,…

AIM:- To create a solid body of Side Door plastic trim including the engineering features using CATIA V5 tool using the  given Class A surface and master section and adding thickness to the component. INTRODUCTION:- Side Door Plastic Trim An interior plastic component attached to the inner side of the door. This product…

  Here we are going to understand and design the concept of front-mounted engine’s hood according to the standards. The hood or bonnet is the hinged cover over the engine of motor vehicles that allows access to the engine compartment, or trunk for maintenance and repair. On front-mounted…

  ABOUT LENS Lens is an optical material that controls the light emitted from a light source and allows it to distribute in a certain angle and density. Lenses provide precision control over light angle. Lenses can be made of plastic, silicon or glass material in various shapes and sizes.      …

  ABOUT LENS Lens is an optical material that controls the light emitted from a light source and allows it to distribute in a certain angle and density. Lenses provide precision control over light angle. Lenses can be made of plastic, silicon or glass material in various shapes and sizes.      …