Download and Setting up ADVISOR Step-1: Download Advisor from https://sourceforge.net/projects/adv-vehicle-sim/ Step-2: Unzip the folder and add it to MATLAB location Step-3: Once added to the Matlab location it will be shown in the Current Folder, then right click on the advisor folder and 'Add folder and subfolders'…

Question-1 Difference between mapped and dynamic model of engine, motor and generator are given below To change the model from Mapped to Dynamic Step -1 : Open EV model in Simulink Step -2: Get inside passenger car block & then to electric plant block Step -3: Right click on the motor block to find variant option (to choose…

Question-1:   Question-2: Given :- Duty Cycle = 70% à converting to absolute value = 0.7 Rated Armature voltage = Vr = 72V Rated current of Armature = Ir = 400A Armature Resistance = Ra = 0.5 Ω K∮ = 0.7 volt second Frequency of Chopper = f = 400 Hz w = speed Vt = Rated armature voltage * Duty Cycle = (72V *…

Question1 : Model of Speed control for a DC motor using BJT H-bridge   A) Explanation of the demo model Step-1: To open the demo model type 'Speed control of a DC motor using BJT H-bridge' in matlab search documentation space  Step-2 : Press 'Open Model' tab, Fbelow given Model will open   Step-3 : Follwing can be analysed…

Question-1 A driving cycle commonly represents a set of vehicle speed points versus time. It is used to assess fuel consumption and pollutants emissions of a vehicle. For this challenge, the self-defined drive cycle ‘Sanjay Drive Cycle’ is considered to calculate the braking energy required. Prior…

1. Search and list out the total weights of various types of aircrafts In order to well understand the impact of weight and balance on the stability and maneuverability of the aircraft, it is worth getting back to the forces that apply to the aircraft, and more specifically to focus on the vertical ones. There are two…

The powertrain of an Electric Vehicle (EV) consists of an electric drive system with a battery serving as an energy buffer. Often there is only one electric machine, typically of three phase AC type, connected to the wheel shaft via a gearbox and a differential. However some applications may utilize several electric machines,…