INTRODUCTION: Concrete mix design is the method of finding the precise proportion of cement, sand and aggregates for concrete to achieve the target strength in structures, therefore concrete mix design can be stated as concrete mix in terms of cement: sand: aggregates. The design is done according…

                                      G+1 floors residential plan is given below.      CALCULATION OF LOADS ON THE STRUCTURAL MEMBERS   Aim: To calculate the load coming on a structural members like column,…

all file in pdf so will check attachment

Cross section of load bearing wall over spread footing.   Aim: To draw cross section of wall over footing.   Commands used:   Line. Rectangle. Trim.    Procedure:   Step:1 - Create rectangle by typing "REC" in command box   Specify the first corner point as (5,5) Specify the length of…

Aim:To draw the layout of a residence plan. Commands used: XL-V OR XL-H. Offset. Fillet. Extend. Trim. Procedure: First create a new AutoCAD file with imperial settings. Make sure that in units the type is "Engineering" (as the dimension is in feet and inches) and also set the precision. Set the limits with command…

AIM:  To Create a column schedule  PROCEDURE: STEP1 In the command prompt type line to create tables  In the command prompt type ST (text style) > romans.shx (font name) > 8" (height) > left (justify) In the command prompt type text to text the given text in the drawing  In the command…

AIM: To draw the geometries using Chamfer, fillet tool in Autocad. Commands used: Line, circle, chamfer, fillet, mirror, trim, move, rotate, annotate. Procedure:  1.New sheet- units- decimal-precision 0.00- meter-ok. 2.Limits- 0,0 and 420,210. 3. zoom-All. 4. Select Line tool and draw the lengths starting…

 Aim:- To draw the floor plans and sections using the proper dimension techniques and dimension styles to document the project.     Introduction:- Plan and Sections are different types of drawings used by architects to graphically represent a building design and construction. A plan drawing…

Aim - Creating Bar Bending Schedule, Different Door types, and Creation of Standard drawing templates using AutoCadCreating Bar Bending Schedule, Different Door types, and Creation of Standard drawing templates using AutoCad Procedure: 1. Create…

1 Aim:  To create a 3D Furniture element using AutoCAD software. Introduction: Various commands used: QNEW command UN command Box command Rectangle command Extrude command SUBTRCT command DIMLIN command 3DO command UCS command Procedure: Type QNEW in command box, press enter, select the imperial as default setting…

INTRODUCTION:- This project deals with AUTOCAD software which is widely used for drafting the plans, elevations, and all other required drawings for the execution of the work using various commands. AIM:- to draw the floor plan of the given plot size of 60' x 20' facing east  to draw elevation, sections of the plan…

1. Kitchen layout: Aim: to draw the kitchen layout. Procedure: First we draw the Below counter plan: We create a wall by drawing a rectangle of 4300X3200mm and draw offsets of 230mm as wall thickness towards outside. Now we draw the Left cabinet and fridge: We draw the fridge by drawing a rectangle. Take an offset…

Aim: To draw the 3D Isometric View of the building as shown in the figure Introduction:   A plan view of wall of two elevation views of windows on both sides are given and they are to be converted into a 3D model. 2 window openings on both sides are given with details regarding the frame dimensions, mullion…

PROJECT : Create a 3 dimensional model of the residential building with a rendered view.    AIM: TO DRAW THE 3D  RESIDENTIAL BUILDING AND TO CREATE THE RENDERED VIEW     PROCEDURE :    DIMENSION : EXTERNAL WALLS : 9" WINDOW : 3'X4' DOORS : 4'X7' ALL DIMENSION IN INCHES …

AIM : To create multiple viewports, scaling the drawing and setting in template in AutoCad Introduction :  Open autocad application Type Qnew and open new drawing Set units according to drawing Switch on object snap and object snap modes  Ortho mode is ON Problem 1 AIM : To create a layout of the plan and…

AIM:  To model a Ceiling from the architecture tab above the walls at the first-floor level. INTRODUCTION: The creation of Ceilings within Revit is a very similar process to that of Floors and Roofs- ie you can let Revit do most of the work and "gress" where you want the boundaries to be.Or you can enter Sketch Mode…

Q1) AIM:  Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School. ANS) OFFICE BUILDING Q2) AIM :  Assume reasonable assumptions for geographic…

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo Introduction: Dynamo is an open source visual programming language for Revit, written by designers and construction professionals. Its a programminglanguage that allows you to type lines of code;  while also creating…

Aim: Using the Architecture/ Structure Project file developed and exporting the Revit architecture and structure model to Navisworks Cache file following the export settings Commands used: Export File 3D view Procedure: 1. Opening the Architectural models of previous weeks and viewing in 3D view 2. Clicking on export…