1)what is the process of project execution activity?              1.RFQ: RFQ stands for request for quotation. Once the RFQ is received from the customer need to study the RFQ and perpare the documents of technical information, production information, time duration to manufacture. …

1)What is Design methodologies DESIGN METHODOLOGIES:            In this methodology we learn about three design processes we're going to study how do we proceed while doing a design. And one of the things that we take care of structuring or design tree so we'll be learning how to structure the design tree, and how to name…

DRAFT ANALYSIS:  It is a tool that allows the user to ‘see’ whether the part they are designing can be removed from the tool being used to make it. In the case of plastic injection molded parts it also allows the designer to see if there is enough draft on the part to ensure that it can be correctly grained.…

 AIM:                     Create the Base Bracket Plastic component through the given Clas-A surface. And perform the Draft analysis on the model. OBJECTIVES:        To model a base bracket and perform draft analysis on the model. THEORY: Draft…

 OBJECTIVE:         The objective of the project is to design the switch bezel and to do a draft analysis for it by creating the required tooling direction with the help of Bisecting method. INTRODUCTION:        The control panel bezel is the frame part of the window switch…

AIM:          Coin Holder Plastic Component Design Using CATIA V5. OBJECTIVE:          Creating Center console Coin Holder Plastic Design from given CLASS A and Draft analysis of the component. Key Points:  Bisecting method for generating Main Tooling axis Generating…

 Objective:    To design core and cavity for switch bezel with 3 mm thickness Performing draft analysis to verify the creation of the Tooling axis and C Class surface.Software:      CATIA V5 (Generative Shape Design) Introduction:      CATIA V5        CATIA…

Aim: To Design a rib for the given plastic component. Software Used: CATIA-V5. Input component: Coin Holder. Introduction: Rib:         Ribs are thin, wall-like features typically designed into the geometry of a part to add internal support to walls or other features like bosses. In a similar fashion,…

AIM:       To create the boss and Dog House for the Centre console coin holder considering the design rules THEORY:       we have created coin holder before and also we have attached ribs since ribs are important in the design of plastics parts because they allow us to make a component rigid…

DESIGNING THE LOCATORS AND HEAt STAKES ON A DOOR APPLIQUE Locators or Locating Pins:      Locating pins are the rib like structures on the B surface which are used to position the child part with parent part while assembling. These locators were placed in the multiple location on the part depending upon…

AIM:       The objective of this project to develop Closed Surface Model using Master Sections and to develop attachment features for Fixation of Parts by following OEM Design standards and procedures in CATIA SURFACE WORKBENCH and PART DEsIGN ABSTRACT        The report details about…

AIM:      To create assemblies of Quick return mecharnism and CV joint and to also create 2D drawing of the given assemblies in CATIA. ASSEMBLY:      Assembly modeling is a technology and method used by computer-aided design and product visualization computer software systems to handle multiple…

AIM:           To prepare a report explaning what is benchmarking,compare atleast 4 CARS and Provide a proper conclusion for the report ,suggesting a suitable vehicle among the comparison made. What is bench marking?                    Benchmarking…

                                                                                           …

HOOD DESIGN Introduction:-          Hood is main component of a car at the front portion. It is used to decorate the car & add luxurious look. The shape of the bonnet is made aerodynamic in order to minimize the air effect. Hood design consideration:          The hood…

Aim:        The main aim is to design the fender model with the necessary mounts using the class-A surface. Mounts:          1. Bumper         2.A-Pillar         3. Sill         4.Cowl         5.…

SECTION MODULUS OF THE HOOD: Objective:         To find the section modulus of the hood and optimisation to improve the overal section modulus. Section Modulus:         The section modulus (S) is geometric property of the cross section used for designing beams and flexural members.…

ROOF DESIGN AND ANALYSIS USING CATIA V5: Objective:        Design a roof using the provided skin data and also position bow roof rails in accordance with heat distortiorn and snow weight formula also find section modulus of the roof and roof rails and check the draft of the designed parts. Software:…

Aim:      The main aim is to design the Back door of a car from scratch following the design parameters using CATIA V5.Theory:Back Door:The back door is placed at the rear end of a car at which the loads can be kept. It is also called a trunk or tailgate. It consists of an outer panel, inner panel, and some…

DOOR ARM REST AIM: CREATION OF DOOR ARM REST AND ADD THICKNESS OF 3 mm In an automotive context, an armrest (or arm rest) is a feature found in mary modern vehicles on which occupants can rest their arms. Tooling Axis: It is the direction in which the component will be ojecting after the molding process is completed The…

  Fender Design - Wheel Arch Challenge Objective: Study the Wheel Arch area and prove whether the car will pass the standards or not using European regulations. Software Used CATIA V5 Introduction: Wheel arch comes with some standard specifications When viewed trom the front or top side of the vehicle, if the tyre…

Advanced Sheet Metal Design Using NX Cad Challenge 1 Casing Design Title of the Project: Advanced Sheet Metal Design Using NX Cad Challenge 1 Casing Design   Objective: To design a Casing with the help of NX advance sheet metal.   Introduction:          NX Sheet Metal provides a set of…

Title of the project:Advanced Sheet Metal Design Using NX CAD Challenge 2Box Assembly.   objective: To design a Box assembly using Siemens NX sheet metal application. introduction         1. SIEMENS NX: NX formerly knovwn as 'unigraphics" is an advanced high-end CAD CAM/CAE, which has…

Advanced sheet Metal Design Using NX Cad challenge 5 odd Shaped Enclosure Title of the Project: Advanced Sheet Metal Design Using NX Cad Challenge 5 Odd Shaped Enclosure objective:           To designa Odd shaped Enclosure with the help of NX advance sheet metal. introduction:      …

Title of theproject: Advanced Sheet Metal Design Using NX Cad Challenge6_ Bracket Objective:           To design a Bracket using Siemens NX Sheet metal application. Introduction:          1. SIEMENS NX- NX formerly known as unigraphics, is an advanced high-end CAD/CAM/CAE,…

Tittle of the Project- Advanced Sheet Metal Design Using NX CAD Challenge_7_Metal Bracket-2 Objective:To design a Metal Bracket-Il by using Siemens NX12 Sheet metal application Introduction:       1. SIEMENS NX: NX formely known as "unigraphics"is an advanced high CAD/CAM/CAE, which has been owned since…