I ATTACHED THE ANSWERS SHEETS IN PPT AND CAT PARTS IN THE GIVEN BELOW...

I ATTACHED THE ANSWERS SHEET IN PDF AND CATDRAWING....

I ATTACHED THE ANSWERS SHEET IN THE GIVEN BELOW IN CATPART AND POWER POINT PRESENTATION..

I ATTACHED THE ANSWERS SHEET IN THE GIVEN BELOW AS PPT AND CATPART...

QUESTION: Create the boss and Dog House for the Centre console coin holder considering the design rules mentioned in the video.  General Guidelines for Bosses:   Draft  - 0.5 degrees on walls of boss   Thickness -  Typically 40%* of the nominal wall at the base.   Height to Diameter Ratio -  3:1   Radii - 0.25mm maximum…

Door Applique Design with Engineering Features aim: Sketches Use Positioned sketch Sketches should be Iso-Constrained Tree Structure Ensure Proper Tree Structure Geometrical sets should have a proper name based on the sketches present inside of it All the sketches should be created under the Geometrical set  Report…

AIM: In Tree Structure Ensure using surface command. Use closed body command to create the solids Rename geometrical set properly. Output Required in a ppt : Picture of the sketches with Sketch solving status’s geometry tab Picture of the Detailed tree structure. Picture of the 3D CAD Create closed body …

AIM: To create 2 assemblies according to the content covered in the course videos. You will be provided with 2D diagrams of the components and you will have to first create the individual part files and then create a complete assembly of those part files in the assembly workbench. After creating the assembly make use of…

                   Development of a Door Trim panel Aim;      To Creation of CAD model considering the following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness: Refer to master sections c) Attachment strategy : …