OBJECTIVE The main objective of this project is to design and assemble the American Chopper with photo realistic renders using Solid works. Decals, Scenes, Lights and Camera should be added to the assembly. Using Photo view 360 and solid works visualize render American Chopper     INTRODUCTION SolidWorks is a…

  AIM: TO DESIGN BASE BRACKET USING CLASS A SURFACE AND PERFORM DRAFT ANALYSIS ON THE DESIGN Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Tooling axis is created with bisection method. Intersection of the class A surface with a plane is made and the edges which are parallel…

  AIM: TO DESIGN SWITCH BEZEL USING CLASS A SURFACE AND PERFORM DRAFT ANALYSIS ON THE DESIGN Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Tooling axis is created with bisection method. Intersection of the class A surface with a plane is made and the edges which are…

AIM: TO DESIGN BUMPER USING CLASS A SURFACE AND PERFORM DRAFT ANALYSIS ON THE DESIGN Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Here we will come acoss two continuous boundaries. Tooling axis is created with Measure Inertia option. A point created through this is extruded…

AIM: TO DESIGN COIN HOLDER USING CLASS A SURFACE AND PERFORM DRAFT ANALYSIS ON THE DESIGN Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Tooling axis is created with Measure inertia feature. The point formed is extruded in a direction and that line is considered as a tooling…

  AIM: TO DESIGN SWITCH BEZEL USING CLASS A SURFACE AND PERFORM DRAFT ANALYSIS ON THE DESIGN Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Tooling axis is created with bisection method. Intersection of the class A surface with a plane is made and the edges which are…

  Procedure: Check the boundary and ensure the class A surface form a continuous boundary. Tooling axis is created by extracting the base surface and creating a point at centr to it. A line is drawn passing through the point in Z direction which is considered as a tooling axis. Draft analysis is performed to verify…

AIM: To create 4 way locator,2 way locator and heat stakes on doo trim lower. 3-2-1 PRINCIPLE: A work-piece free in space can move in an infinite number of directions. For analysis, this motion can be broken down into 12 directional movements or "degrees of freedom". All 12 degrees of freedom must be restricted to…

BENCHMARKING: Benchmarking in automobile industry is a process of measuring the performance of a company’s products, services, or processes against those of another business considered to be the best in the industry, best in class. The point of benchmarking is to identify internal opportunities for improvement. By…

Underbody Coating: Underbody Coating is a sprayable coating which protects the under surface of the vehicle from corrosion. Underbody coating provides long term protection from corrosion to cars underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible…

Aim: To design car hood in NX using given master section and the specified design parameters.   Introduction to Hood: Car hood/bonnet is a hinged cover that rests over the engine in a front-engine car. Hood can open to allow access to the engine compartment for maintenance and repair. Hood is also considered…

AIM : To design the BIW(Body in white) of front fender using the fender skin data and provided master section by using NX CAD. Introduction : Fender is the american english term for the part of an automobile, motorcycle or other vehicle body that frames a wheel well. It's primary purpose is to prevent sand, stones,…

Aim: To find the section modulus of the hood and optimise it to improve the overall section modulus. Section Modulus: The section modulus (S) is geometric property of the cross section used for designing beams and flexural members. Section Modulus is defined as the ration of total moment resisted by the section to the…

                                AUTOMOTIVE SHEETMETAL ROOF DESIGN USING NX CAD OBJECTIVE: To create the Roof Sheetmetal design in NX cad, and also design Front roof rail, rear roof rail, bow roof front, bow roof rear, center roof rail.…

Design of Back Door of an Automotive Car   Aim:         To design the Back door (Tail gate) of a car from the styling surface provided using NX CAD. The ultimate aim is to design the Back Door by following the Industrial Standards.   Back Door:               …

                                                      Fender design-Wheel Arch Challenge AIM: To calculate the wheel arch area of the given fender and prove whether the car will…