AIM:-QUICK RETURN MECHANISM    Objective: I have created individual parts models 1 and model 2 after making an assembly.  Assembly Model 01 1. QUICK RETURN MECHANISM Initially, each body creates a separate file as per the given dimension in the drawing  like below mention image, PART 1- PART 2…

 Title: Base Bracket Design  Aim: To create a Base Bracket Plastic Component through a given Class A Surface and perform Draft Analysis on the final plastic component. objectives:  Creation of Tooling Axis. Creation of Class B and Class C surface. Creating a solid part out of surface modeling.…

Aim The aim of this project is to develop the product design of the switch bezel with the help of the class A surface following the OEM standards. Introduction Class A Class A surface is the term mainly used in automotive design industry. It describes the final production surface data for the aesthetic parts of the…

BUMPER DESIGN – CHALLENGE 4 AIM Create the Bumper Plastic component by the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface might be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. INTRODUCTION A bumper is a structure…

Create the rib for the Drill Handle considering the design rules mentioned in the video.  Create the Screw boss for the Drill Handle considering the design rules mentioned in the video.  General Guidelines for Bosses:   Draft  - 0.5 degrees on the walls of boss   Thickness -  Typically 40%* of the nominal wall at the base.…

AIM  To Create the Dog House for the Door Trim considering the design rules through the given Class-A surface. THEORY Tooling Axis Tooling Axis is the direction in which the mold or core and cavity opens and closes. While designing a component first thing is to define the tooling axis.  Procedure Check the connectivity…

Objective: The main aim of this challenge is to create a solid body of 'Door Trim Lower' with the help of the closed surface method by using the 'Generative shape design' workbench in CATIA V5. Performing the 'Draft Analysis' on the solid part body of the Door trim. Given sample design Overview:Initially, we need to offset…

NOTE: I have Attached the Report, Photos and CADpart in the Attachment Week 12- Final project AIM: To develop the Door Trim panel OBJECTIVE: Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness : Refer master sections c) Attachment strategy :  Find…

A-pillar Design with mastersection Creating the tooling axis, b class, C class and trimmed with A class surface is the first step for design other engineering in the A-pillar. Analyzing the mastersection and appying the design features based on the particular mastersection help us to reduce more time spending with unneccesary…

                                                                             DESIGN OF CAR FENDER   The fender is  the part of an automobile, motor cycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road spray from being thrown…

                                                                                Hood design Aim: To Design Hood…

 SECTION MODULUS CALCULATION AND OPTIMIZATION AIM : To calculate the Section modulus for the given hood model for two iterations and analyze which will the better to be considered. SECTION MODULUS : Section Modulus is also referred to as the Polar Modulus or the Torsional Sectional Modulus. It is denoted by Zp. Section…

                                                                                          Title-…

AIM 1.0   Create a back door design on the given stylistic surface, making use of the proper design techniques and adding the required embosses and reinforcements.   Introduction (2.0)   2.1 RETURN DOOR     The term "tail gate" or "back door" simply describes the opening and closing rear door of the vehicle.it shielding…

Title: Defining Connectors and Clips using CATIA V5 Objective : Downloading the 3D CAD files form the te.com website and then defining the parts electrically and further creating a catalogue for the components. Introduction:  A connector is a device(or more precisely, a mating pair of devices, often a plug…

AIM:   To solve the above assignment questions and define the necessary electrical properties in the respective workbench.   OBJECTIVE:   To download the P-Clamp CAD data and define it as Electrical Support in the Electrical Part design workbench and also define the necessary electrical properties. To download the Backshell…

Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use Following connectors as shown in layout diagram. Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Keep end extremity at 30mm (from connectors end)   Download connector…

Let, we have provided the harness layout as below and accordingly we have to route it. For that we have to make assumption for harness bundle diameters and use DT connectors.

Aim - Flatten the harness assembly completed in “ week 4 challenge”. Place the flattened view on drawing sheet. Ensure bundles with protective coverings has different visuals on drawing view.   Process - 1.) Define the Connector

WIRING HARNESS DESIGN PROJECT 1 AIM Design and develop the Wiring harness on Given V6 Engine and Prepare flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design.   INTRODUCTION A wire harness, also commonly referred to as…

WIRING HARNESS FOR TAILGATE   AIM: To route the wiring harness for the given Tailgate. Application of all Packaging rules and industry best practices studied in this course shall be demonstrated in design. Apply Protection coverings as required. INTRODUCTION: WIRING HARNESS OR CABLE HARNESS: A cable harness,…