Objective :  This project is about modeling the chopper using solidworks Modeling several parts of the chopper and making the assembly for the same Creating a photorealistic model of the chopper ad render the model using solidworks visualize Parts to be modeled for american chopper : Transmission belt Kick stand…

Objective : Creating surface modeling of different parts of the Yacht using solidworks software To assemble the modelled parts of the Yacht Set of tools and features : To model and assemble the parts of the Yacht there are several tools and features that were used Here are some: 2D and 3D sketch : Sketches are to…

Assembly of Yacht - https://drive.google.com/file/d/1gCnz0eNCIH5E6UJTpCxIGp-xZiKJYvVF/view?usp=sharing       I have already completed my course work, I'm doing this re-submission as per the guidelines given by " Mr. Soundar- Support Engineer "

Objective :  To import the given models and clean up their geometry before extracting mid-surface , then meshing them according to given parameters using automesh option and finally assigning them thickness using property Procedure : Open the given models and select RADIOSS interface Analyse the model on its surface…

Objective : To import the given 0000.rad file in hyperworks with the RADIOSS interface and to run the file with and without applying recommended property parameters to get the output files and then find the differences in the simulation run on absence and presence of property parameters Procedure - CASE 1 : ( Base…

Objective : To examine and observe the changes in element behaviours , while applying various types of material using material card in hyperworks during component undergoing deformation and comparing the results of each material  Procedure - CASE 1 :  Import/Upload the material model file given - FAILURE_JOHNSON_0000.rad…

Objective : To mesh the given bumper assembly using hypermesh under recommended mesh size  To run the simulation for the given crash tube model under several different interface cases and by changing the parameters & shape of the model  To analyze the changes with different cases applied Procedure - Meshing…

Objective : For the given component, batch meshing has to be performed and non-linear material as well as property to be assigned Procedure : Import the component and split them into parts for convenience Take a part and follow similar steps to perform batch meshing Take a part and delete solids from the part…

Objective : To mesh the given component by extracting mid-surface manually and also assign thickness accordingly   Procedure : Import the the and choose RADIOSS interface Analyse the component and look out for any geometrical errors on its surface and edit them using Quick edit option Split the component…

Objective :  To perform various types of 3D tetra meshing using hypermesh for the given components by assigning given parametersProcedure : Import the given model and then split it to perform 3D meshing accordingly *Similarly with others models*  Take one component, which has to be meshed using 2D…

Objective :  To import the given model and perform functions like extracting mid-surface ( manually ) , 2D mesh and then assign thickness Procedure : Import the given model and change the interface to RADIOSS  Split the parts and perform the functions similarly to each part of the component Delete…

Objective : Frontal crash analysis - To import a given model and analyze its behaviour in various aspects by feeding required inputs , and requesting required outputs using tools in hyperworks , through which the analysis of the model during frontal crash could be determined    Procedure :  Open hypermesh…

Objective : Side crash analysis - To import a given model and analyze its behaviour in various aspects by feeding required inputs , and requesting required outputs using tools in hyperworks , through which the analysis of the model during side crash could be determined    Procedure :  Open hypermesh…