Lesson finished
Lesson finished
Unlock all 12 lessons of IC Engine Calibration using GT-POWER and GT-SUITEFull course ₹40,000 · paid
GT-POWER Intro, 1D Simulation and Template, Object, Part Structure
A free lesson from Skill-Lync's IC Engine Calibration using GT-POWER and GT-SUITE course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “1.0 - Introduction to IC Engine Calibration using GT-POWER and GT-SUITE - Part 1”
What will you learn in this free IC Engine Calibration using GT-POWER and GT-SUITE lesson?
The instructor outlines the course plan and explains what a one dimensional simulation approach means, using a pipe example where properties vary only along its length. The lesson launches GT-SUITE, tours the interface and template library, and explains how templates produce objects and parts, plus references, dependencies and value selectors.
- What one dimensional engine simulation assumes
- Launching GT-SUITE and the template library
- Template, object, part and reference hierarchy
- Checking dependencies and using value selectors
What comes after lesson 1?
The next free lesson is lesson 2, “SI Engine Basics and Single-Cylinder SI Model in GT-POWER” (103 min). Later in Skill-Lync's IC Engine Calibration using GT-POWER and GT-SUITE course (paid): lesson 4, CI Engine Modelling Techniques - Part 1; lesson 5, Case study on CI engine - Part 1; lesson 6, Turbo Charge Modelling - Part 1. The full course has 12 lessons (18 h 43 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Part 1
Hello everyone. Welcome to our first session on IC engine modeling using GT-POWER. It's a 1D simulation, system simulation tool. I'm Sitarth and I will be taking you all through these contents over the next 12 weeks. So we'll start with the introduction to GT-POWER and then we'll move towards SI engine modeling techniques with one case study and then we will move to the CI engine modeling techniques. There is a one case study on CI engine as well. where we'll talk about the heavy duty CI engine and then very critical component of IC engine is a turbocharger and supercharger. We will understand the difference between these two and how to model using GT-POWER. Then there will be one case study on FRM builder. So FRM is nothing but fast running model which is really helpful for controller development or what we call as hardware in loop system simulation design where the ECU is in loop with the plant model.
And then there the run time is very important. We have to run the model in real time and there this kind of model really helps. So we will see one case study on how to generate the bottom model. Now because of this BS6 emission norms which are upcoming in April 2020. After treatment is becoming very critical and then the selection of the after treatment is very very important because after treatment devices are having catalytic converters catalyst which are very costly. So it has the BGM which is very precious metal such as platinum, palladium, rhodium. So we will see one case study on three-way catalytic converter.
Then DOC, DPF, SCR. Now for diesel engine, this DOC takes care of the oxidation of CO and AC part. DPF takes care of the particulate matter which filters out this particulate matter. The efficiency of DPF is close to 99% and then SCR system is nothing but selective catalytic reduction. So it reduces the NOx into N2 and H2. So we will go through all these after treatment devices at very high level and then very important topic optimization. Now in engines there are so many parameters which works simultaneously. So there are a lot of inputs and then a lot of outputs simultaneously.
And then it's very important that we should achieve a required performance and emissions or what we call that we have to maximize the performance and minimize the emissions. So how to do that? So we will understand this optimization techniques. The next critical session is the next critical session is the discodigestion. I have one complete session for this discodigestion techniques where we will understand how to convert these 3D components such as let's say intake manifold, exhaust manifold into 1D so that we will not lose the shape and then we can discretize those components very accurately.
Then there is a last topic on hybrid engine modeling and we will understand what are the differences and how this hybrid engine modeling is different. So we will understand this hybrid engine different components P0, P1 level. Maybe if time permits we will go through some basics of battery and battery management system. So who are the target audience for this course students and those who want to do their career in this system simulation software. So now here it's very important that when you will face the interview you should able to answer the questions which are generally asked during the interviews.
So people during interview they ask questions related to say if it is a GT-POWER people will ask you okay can you model a engine using GT-POWER. So when you say the modeling obviously they will not give you a GT-POWER tool and they will tell you okay they show how to do this but generally what they will ask is that okay how to model a helical port in the for diesel engine or how to model a tumble port in 1D simulation software or how to model a variable voltiamix or which are the non-predictive combustion models which are the predictive combustion models their benefits and then their limitations and in which case we should use predictive combustion models.
So basically like it's not directly they will ask you to do the modeling using GT-POWER but like basic questions so that at least they will understand okay you have worked on the GT-POWER or not or at least they should get the confidence that okay you can use this tool. Alright you understood the purpose of this tool. So the main expectation I would say is that user utilization of simulation software with human intelligence. So why I am focusing on human intelligence because as of now there is no tool which is artificial intelligence at least in this engineering softwares where we go to the very root level or fundamental level and maintain where we use these tools to finalize the system architecture.
What is the main difference between the CAD software and analysis software. So CAD software I would say you do not require expertise like or you do not require an engineer to operate a CAD software because there is you do not require knowledge of thermodynamics, fluid mechanics, chemical kinetics but in analysis software when I talk about the GT-POWER definitely you require this expertise. I would say expertise but the knowledge of all these fields engineering fields. So human intelligence is very very important. Now when I talk about the GT suite is one of the leading system simulation software is used worldwide at least in automotive domain. Now there are other domains also where this is used let's say power plant or let's say this aviation industry.
But if I just talk about automotive development I can definitely say that more than 90% of this is penetrated this market is penetrated by this GT suite application wise it's like on highway vehicles off highway vehicles marine and rail industrial machinery aerospace power generation. So if you go to this site of GT suite you will get to know which are the different different domains this software is used. So now let's get started we have very limited time so without giving any other introduction or any other overview let's get started and let's try to learn this GT-POWER software.
So our first topic is introduction to GT-POWER so it's like a modeling internal combustion engine engine using GT-POWER. So when I say GT-POWER modeling we can differentiate this into two major areas one is let's say development and second is the application. Now just to give example let's say when I use mobile being from a mechanical background I need not to know what is happening inside right. Which microchip they are using which is the graphics card or what is I need not to understand that or how when I use these applications how it works.
Because I am a user so I need not to know how it is developed how this android is developed or how these applications are developed using android. But as a user I will just use phones I will use different different application for my purpose. So similarly in GT-POWER also we can differentiate this into two basic areas where application means where I have some domain knowledge and I want to utilize this domain knowledge. And I want to use computer to solve equations or to do some computations.
So that will save my time. And the other area is this a development where I'll be interested in developing the software. So let's say I will be interested in the how to do the programming how to use build this GVI which numerical methods I should use which model I should use to solve those particular equation. And whether I should go the explicit way or implicit way so that that that things. So where I'll be developing a tool. So now this session is focused on the applications.
We will not be talking about how to solve this Navier-Stokes equation. Whether to use Range-Kutta method or any other method will not be going into that. So I'm just making this clear. So when I say the simulation approach what do you mean by that. So when I say the simulation approach is nothing but it is just like solving a mathematical model. So what we do is that the real physics we try to capture using some mathematics. So we try to fit those physics such as let's say heat transfer or chemical genetics thermodynamics or combustion.
So all those physical phenomena which are happening in the engine we try to convert that into a mathematical formula. And then we use this computer to solve that mathematical formula. So basically it is nothing but a numerical techniques where we try to get a not exact but I would say a near to exact solution. So it's basically about the capturing the real physics. So when I talk about the engines there are heat transfer in the exhaust manifold, water jacket, chemical genetics. So it happens in incident and combustion and after treatment.
It's about let's say finding the pressure losses in the pipes. So what is important here is the engineering knowledge as I said earlier. So it is more than the cat. Now this is the representation of Navier-Stokes equation in Cartesian coordinate. So when I say the Cartesian coordinate is nothing but X, Y and Z coordinates. Now this is the equation which we solve or which we means basically a computer solve. So Navier-Stokes equation where it captures the different different. You have... Forces which are acting on the fluid. So if it is external forces or viscous forces or let's say because of gravitational forces. So it combines all those forces into a single equation. And programming, we can write a program to solve that neighbor stroke equations. So to go into this detail, you need some good understanding of the mathematics. So as mentioned earlier, we will not go into that area.
So what is the significance of neighbor stroke equation? So a neighbor stroke equation is generally in computational domain. It's a combination of mass, momentum and energy. And for Newtonian fluids. And then when you say the fluid, it fluid is like liquid or it can be in gas, but obviously with Newtonian fluids. So Newtonian is like stress and strain is in direct proportion. And it can be used to solve incompressible or compressible high-speed, high-speed, high-speed, viscous flows. Now what is the main problem with the neighbor stroke equation is that the neighbor stroke equation is a second-order non-linear equation which is insolvable.
It means there is no exact solution as of now or till that to a neighbor stroke equation. And therefore, approach is used as like a discretization. So instead of solving towards the exact, we can solve not exact, but towards the exact. That is the delta. So let's say the exact value is 5. So we will have let's say 4.98 or 4.99, 4.995. So that depends that how accurately we are solving the equations or how accurately we are discretizing the domain or how accurately we are capturing the physics.
So accordingly, we will get a near to exact value. So that error is very important. So what order of magnitude we are happy with the error, whether it is 1% we are happy or with 0.1% accordingly, our efforts in building the model changes. So sometimes, let's say when we start with the modeling engines, we never get accuracy level of let's say 1%. We are very close to let's say 10%. Within 10% we can reach very easily. And then slowly, slowly we see that why that gap is higher. So we can then reduce that gap, putting more efforts in the modeling.
So this is a simplified approach of Nimitz to recognition in one dimension. So why we call the one dimensional is because if let's say take example of this pipe, along the cross section, we assume that the properties will remain constant. So which are the properties? Let's say it can be pressure, temperature, density. So if I take along the cross section, this pressure will be same everywhere. So the properties are changing only along the one direction. So that one direction is from A to B, this is the pipe length. So along the length, pressure can vary, temperature can vary, density can vary obviously. But if I take along the cross section, that pressure will remain constant or that property will remain constant. That's what we call it as a one dimensional.
So in engine, we can assume this one dimensional approach and then we can solve many problems. So these are the capabilities of GT-POWER. Just to show this is the, it solves the negative flow equations. And then it's very uniquely stable. As of now, I have never faced a problem with the conversions, which is generally a major issue with simulation softwares. And then it has the DOE and optimization package inbuilt. We can use this for calibration. Even we can integrate with 3D and then we can solve a CFD.
Just to give example, let's say if I want to understand how this EGR is mixing with the intake incoming air and then have this distributed along the cylinder so that I can understand whether there is a cylinder to cylinder variations. Let's say if it is 6 cylinder engine, everywhere I should get the uniform EGR. So I can understand using this 1D 3D coupling. So that converged light comes as a free software with this GT-POWER and it can be used to understand this mixing phenomena. So along the cross section, we can understand what is happening. So let's talk about the engine. Now let's focus on the engine. So this is a typical engine.
So when I say, because now here, because in next session, we will be going through the SI engine modeling. And then after that, we'll be going through the SI engine modeling. So in this first session, what we will understand is that how to represent all those parts. Now let's say now in engine, I say engine, there is a piston, there is a cylinder. There are intake walls, exhaust wall, there is a spark, this is the SI engine. So there is a spark plug. If it is a CI engine instead of spark plug, there will be injector.
Now in this green, green is nothing but a water jacket. So now water jacket is nothing but a coolant. So this coolant is used to maintain the temperature of the metals so that they will not go into the very high temperature zone. And then we can avoid the engine seizing. Now here we can see that this is a exhaust side, exhaust port, and this is the intake port. So, and then there is a camshaft, exhaust camshaft, there's a crankshaft. So these are the different, different components.
So we'll see one by one how to model those. So which are the different applications of GT-POWER? So it can be used for fluid flow, thermal, mechanical, multi-body structural. So each and every physics, let's say if it is a mechanical or electronics or electrical, we can capture using GT-POWER. So when we can capture the magnetic forces of chemistry, obviously, and then therefore we can use this for after treatment analysis, even the controls, logics, we can develop in very detail. But doing this, always remember that analysis tools, as I said, human intelligence is required because garbage in is garbage out because software will not tell you what is correct, what is wrong.
Whatever the inputs you are giving software will solve and will give you the output. Now it is our knowledge or this is our understanding that really matters. So we have to use this simulation softwares very effectively to get the relevant output. Now let's get started with the GT suite software. So how to launch this? So if you have, let's say, shortcut on the desktop, you can double click and you can start or you can go to start. You can type GTI where you'll get this and then you can launch from this on the start.
So when you launch, it will open this. And now you will see that there's a file, home view data tools. So this is built on the windows platform office. So it is similar. So all the naming structures and everything will be basically like a MS office. And therefore it's really user friendly, I can say. So once you launch, what you will find is that there will be resources. And resources, you'll find this home GT suite industries applications where you can go one by one and you can check different, different contents and topics.
And generally in resources, you will find some of the blocks where they will be publishing new areas, new upcoming. Now this RD is upcoming area in India. In India, it will be, there will be these legislations in 2023. So from 2020, that is after BS six, it will be under monitoring. And from 2023, they will be implemented all over the India. As of now, they are launched, they are there in the Europe already from 2017. So all these relevant topics or maybe the future topics, you will find some blocks, some material.
So you can start here. And you can find these latest blogs also, different, different topics. So this is about the resources. And if you go to the examples, you will find a lot of examples in different, different areas. As of now, this acoustic, aerospace, after treatment, each and every, almost all, they have covered everything. So we can focus here on our engine. So you will find the two folders here. One is engine 0D, SIL and HR. And then there is engine 1D gas exchange combustion. So if you go to this 1D gas exchange combustion, you will find this diesel, gasoline, natural gas, so many foldering structures.
And then if you just expand any of this, you will find a lot of examples in this. So you can go one by one and then try to understand. Then there is tutorials you will find. So now these two tutorials, you will find, even you can find, if you go to this C drive program files, you will find GTI. Let's say if you go to this 2018 version, you will find tutorials folder. And in that tutorials, you will find these three different folders, core simulation and user code, graphical applications and modeling applications.
So if I go to modeling applications, again, there are different, different areas. There is a vehicle drive line, wall train, transmission, lubrication, each and every. Let's say if I now focus only on the engine performance, if I open that, you will find that there are 11 tutorials they have given. And then stepwise. At the end, you will find engine performance tutorials, a PDF file. If you open that, if I open this engine performance tutorial, you will find this in detail, each and every tutorial stepwise they have given.
So you will find, they have covered, let's say basic single cylinder engine, SI and DI engine. Then adding the advanced feature to the basic engine, such that how to create a parameter sweep, or maybe the ability dependence. Then SI combustion, SI VB, passing multiple cylinder, SI engine. So stepwise. Now if you will find that effect, just click on a thing, it will directly open. Let's say now this intake port. Directly it will take you towards that intake port session. So what is best thing about GT is that it has very good health file structure, very, very documented.
So if anyone is interested, really, he can just use this tutorial session and he can just become expert in this GT bar, really. I mean, so now, so what is the difference? Why are you should attend the course? That's where like I said, right? So it's like a combination of what are the real things? Let's say we have case studies. Take care if there was great, guys. If people were spending a sip of practice for the bad people in public health course, who verge the only way us onto the modified cow植ệ será and why not the cowifies.
Anyway, Take care. And then how to model those engines in GTPAR. So what I have done is that I have avoided these tutorials. I have seen that if anyone is really interested, can go through the tutorials and you can learn this GTPAR. But let's say if you want more. So in this session, so there's a purposely I have kept my sessions different than the tutorials. Obviously at some point we'll be taking the references of tutorials so that it will become easy for you. But completely doing the case studies, I have changed from the real scenario. So we'll be using, maybe they'll say Honda CBR. We will see how to model that. CI engine also will see the heavy duty and then we do some, we will understand that how this heavy duty diesel engines are modeled during the CI engine session. So that way it will be different. It's like tutorials will be different and our sessions will be different. So I was talking about the tutorials.
So each and every, so as per your interest, you can go through each and every session and then just explore this tutorials. No issues with that. Then you'll find this manual step. And then here in manuals, you will find different, different manuals. So here also if I go instead of this tutorials here, I can just go to the documents and then I can see modeling applications, modeling theory. So those who want to understand that how this flow or mechanical, so I can just open and I can start reading this.
So if I go to this flow, if I go to this flow, it will ask the password and then the password is already mentioned here. So if you see this password of our video, so if I open, you'll see that the password is integrated CA. So we'll find this flow theory. So we'll find this flow theory manual. And then they have mentioned all about the flows, all our basics. What is implicit? What is explicit? Flow components and connection, friction losses, pressure losses, different, different like equations related to that.
So if you go, you'll understand. So it's like for interest, I would recommend that you just start reading this flow theory simultaneously and try to understand that which equation they are using to capture lesser friction. What is the difference between implicit and explicit? Or even you can understand that, let's say, if I select one particular material, what will be the roughness value because this roughness value will have impact on the pressure losses. So out of interest, so out of interest, you can go through that. Why I'm showing is that it is like if you really want to learn this GT-POWER, you have to spend good amount of time because this is very vast.
This GT-POWER is literally we can model anything. So if I go to that level, you have to put more efforts. So then only we can learn this in minimum time because you have to put a lot of efforts. That's what I can tell to learn this GT-POWER software. I'm there to help you for next 12 sessions. We will be going through each and every area and then try to give you the complete overview of the GT-POWER. And then finally, it's up to you because self study is very important. You have to go to the tutorials, to the example files, to the manuals and start reading.
Just start reading. Believe me, you just start with the tutorials and you will learn many things. So
Part 2
So then there's a help file. So now let's go to this home session. Now you'll find that tab similar to the MS Office where you'll find a new, open, save. So I'll not go into that area. That's it. So what you will see here is that the template library. Okay. So now what do you mean by templates? So now let's say GTPower is a tool for engine modeling. Now how a computer or how this computer will, this GTPower will understand that I want to model. a SI engine or I want to model a CI engine. I want to model an intake port. I want to model a pipe or let's say injector or cylinder. How it will understand? So for that there are different, different templates which are already built in the GTPower. So now if you go here, you will see that there's a flow. So mechanical, thermal, electromagnetic, control, external modeling, acoustics, general. So there are so many templates which are readily available. Let's see if I want to model a pipe, I can just go to the flow and go to general flow. And I can see, okay, where is the pipe function or if what I can do is I can just type here pipe. Now if I see this, there are different. So pipe cross section, pipe rectangle, pipe round.
So if I just double click on, if I just click on that, what you can find here is that the information related to that particular templates. So this template models a pipe with a round cross section and an optional bend. So you will find that there is a detail information about each and every template. So these are the templates which are available. So if I go, okay, so this is let's say flow, let's say mechanical. If I go to mechanical, if I go to mechanical or if I can just type engine.
So what I can see is the engine. So what I can see is the engine. So engine crank train. So this template is used to model the kinematics and rigid dynamics of the common reciprocity gas engine crank train configuration. So like that way, you can just go through different, different templates which are available and just try to understand. So now if let's say I want to create a new file. So if I click on the new, what I will find is that it will ask me a GT project map, GT component template, GTX assembly, Xtink, GT drive.
And you will find a description for that particular tab. If I click on the GT project map, I will find a description here, GT compound templates. So let's say I want to create a .gtm file or GT project map. Now when I say next, you will find that it will be asking which license I should use, whether I should use GT suite, GT-POWER, GT suite MP, GT suite RT. Now let's see what is happening. Anyway, in GT suite, if you see this application, there is engine performance and acoustics after it meant cooling system. So it's like everything. So GT suite is like the complete all the application.
GT suite has this. If I click on GT-POWER, you will see that only this engine performance engine exhaust after it meant and bottom two are only active arrest. They are deactivated. So this, if you have the GT-POWER license, I can model only engine performance engine after it meant engine real time and aerospace systems. I cannot model a fuel injection system, hydraulics and pneumatics lubrication circuit like that way. So if you let's say if I have a GT suite MP, so GT suite MP is other than GT-POWER.
So now I cannot model a engine, but other than engine. So let's say if I'm a, uh, after it meant supplier or if I'm a turbocharger supplier, so I need not only see if I'm a transmission or what rent. So I need not to buy a GT-POWER license because GT-POWER license is very costly. So then I will prefer only GT suite MP. And then something called GT suite RT also. So RT stands for real time. So this, uh, license is basically useful when, uh, I want to integrate, uh, issue with the plant model and then plant model is running in real time.
So, uh, let's concentrate on, let's say GT suite. If I just, on CDT suite, if I click finish, what will happen? All the templates related to all these applications will be available in my search library. If I click only on GT-POWER, I will have only pre-configured templates for engine performance, access, operative, and engine real time. So generally, uh, we can go with the GT suite and just say finish. And I said finish. So you will find this library here where we'll have the structure of, uh, different, different, uh, templates.
And then we can start building this. So let's see if I want to model engine, I just go to template library. I just say engine Franklin, I can click this and I can just take it into the main, uh, window. So when I do this, it will ask for the object family. So generally when I take any template, it will create the object. And then from object, I can create a different, different parts. So always I have to give a name to the object. So let it be the engine crank trend. Now you will see that this attributes different, different.
So they are called attributes. So in main is like engine type, whether it is a four stroke or two stroke, speed or load, uh, specification. What is the engine speed, engine friction object, start of cycle, cylinder geometry, then in geometry object. So this attributes, and you will find that there's something called a value selector. So if I click on that, it will take me to the new object, a new template. So it can be engine select the geometry or engine select geometry user. So, uh, if I select this engine select the geometry, it will take me to this.
What is the bow stroke, connected crawl length, compression ratio, then piston to crank offset, crank sliding numbers. So all these details, but, uh, this is not the way we should start the modeling. If I do this, I'll be confused because I will not understand, uh, which template I should use, which object, how, how to, how to create different, different objects out of that templates and then parts. So what is the best way? So best way is that we can start with the tutorial file. So if I go to this file and then tutorials and engine performance, so I can start with this, let's say DI final.
So it's like a direct induction. So what you will see here is that a readily available engine model. So this is single cylinder direct injection, uh, diesel engine. And now if I go here, what I can see is this engine and then already details are filled here. So as I explained earlier, already, this is well documented. So if I go to the engine performance, this tutorial video, you'll find that you can start with this tutorial one. Uh, and we can start with the introduction to the modeling environment and then we can start this.
So this from 1.4, they have given how to build this one, uh, single cylinder diesel engine and single cylinder SI engine. So already they have mentioned. So I hope after this, uh, session, you will go through this, uh, tutorial and you will try to build on your own. Um, I'm not going to all these details currently. I'm just leaving it for your, uh, practice session. And then, uh, during the next session, I will show you how to do the SI engine modeling or how to do the, uh, how to model different, different components such as the support falls in the, uh, using the GT-POWER.
Now let's try to understand, uh, uh, different, different, uh, component, different, different, uh, components. So what you can see here is that, uh, there's the environment at both inlet and outlet. So what do you mean by environment? Because obviously this engine, what is required is air. So that air it takes from the environment and again goes back to the, uh, environment. So it's like a section. It takes the air from here and then this is the outlet. So now this, uh, an environment, if I see towards this left, this is the template.
Uh, this is library for that particular project. So always let's say now this environment inlet. So this is called a part. So if I click here, it will directly show me where is that particular part. So you can see that once I click on that particular part, it will show me where that particular part in the project. So this is environment inlet. So it will be in the three levels. This is called a part. So it is part. Then this is object. And this is the template. So from templates, we have to create the object.
And from object, we have to create different, different parts. So what you can see here is that this environment inlet and outlet, these are two, two different objects from this template and environment. And in environment inlet, this particular part is created from this object. And environment outlet is created from this object. Similarly, if I go to this engine cylinder, so this is a template. Under this template, this is object. And under that object, this is a part. So this is a cylinder. Being a single cylinder, we will find only one cylinder here.
If I go to this pipe round, so this is a template. And then there are four objects inside this pipe round. So exhaust port, exhaust runner, intake port, intake runner. These are the four objects created from this pipe round. And then this exhaust port one part created from exhaust port, exhaust runner. Then intake port and intake runner. So being this is a single cylinder, you will find everything only one. Now, let's say if it is a multi cylinder. Now, let's say if it is a multi cylinder.
And then from the same object, I can create different, different parts. I have to just click and drag it here. So you can see, if I just click and drag, it is creating multiple parts from the same object. So what is the advantage here is that, so now I have this Intake Runner 1, 2, 3 are from the same object Intake Runner. So if I just go click on the Intake Runner, what I can see here is that in the Intake Runner object, I can see these three different, different parts. So the advantage here is that if I want to change the diameter at inlet end, I need to go to the individual part. If I change for one particular object, then it will be applicable to all parts under that particular object because it is a child of that parent.
So Intake Runner object. So Intake Runner object and then it will have the same properties of that particular object. So all the parts will inherit all the properties of object Intake Runner. I hope this is understood. So this is the main advantage of creating. So I will delete this. I hope you understood the difference between template, object and part. Similarly, similarly, now you can see here is what you can see here is. So in flow, if I just minimize this, under the flow, I have this components, connections and references.
So components are nothing but these are the components. And then the connections. Connections, what we can see is let's say wall injectors or orifices. Orifices are like between which connects these two parts. So they will show the direction of flow. So they will show the direction of flow. Now you can see here is that if I just zoom and environment inlet. So the path we can, it's visible directly because of the arrows, we can understand how the air is flowing. So it's visible. So it's visible. So it's visible. So it's visible. So it's visible. So it's visible. So if I just click double click on that, it will take me to the attributes of that particular part.
So these are the different, different attributes. So where there will be timing, lay flow coefficients, output and then plots. These are the attributes. They are called attributes. Similarly, if I go here, DI injection, I can get the different, different attributes of that. Now there is a third group called references. So what you can see is that you see the difference. Now in this references, if I click on the combustion is not showing me or it is not highlighting because they are not a physical part. Let's say now if I click here, it will show me where it is, but here it will not show me because they are the references.
So what is the difference? Now this combustion, if I double click, what it will show me is that this combustion and then this combustion, you will see all the details, attributes. Right? So if I right click on that, the show dependency, if I just click, it will come to combustion objects. So it will show me that where it is used. So we can understand in object cylinder, it has been used. Or if I click on highlight dependent, it will show me the dependency. Right? So now we can just go here into the cylinder and just see whether it is referred.
So if I go here, the combustion object, we can see here that this combustion. So just see, this is COMB, and then it is in the green. Now if I just double click on that, what you can see here is this particular reference. So this reference. So this reference we can see here. Understood? Similarly, if I go to this heat transfer object and double click, I can see this HTR here. So this object is used in the cylinder heat transfer. Now the heat transfer model Bosni GT.
So now this is the reference is depending on our model fidelity. I have to select which particular model I should use. Let's see now this combustion object. Now I have used this. Let's say engine cylinder combustion DIB. Let's say I don't want this model. I want to use different. So you can see this value select. So if I click on this, it will show me the current under usage is engine cylinder combustion DIB combustion. And then it will show me the different, different options available. So instead of DIB, I can use DIJ, DI pulse, 12 fuel, HACI, so many available.
So now being this is the CI engine, I can use, let's say DIJ, DI pulse. So let's say if I want to, instead of DIB, I want to use DI pulse. I have to just click there and say, okay. So it will take me to the, that particular reference. And always, once I create the object, I have to define, give the name to that. Let's say now I put DI pulse. And always keep having that there should not be blank spaces. So if I want to use it, I should not give the space and then write pulse. This is not the right thing.
If you want to do that, either you can put the underscore and then write pulse or just you can write this. Okay. And now you will see that in attributes, there are so many blank things. As this is not filled, it will show error mark. It means that it is not filled. Something is wrong in the particular area and that particular attributes. Now you'd say emissions, it a green map because everything is filled. So it has got the expected values. But if I go to main here, okay.
So now entertainment real multiplayer, I have to put some value here. Again, I can go here when value selected and I can go dependency on that. Or I can just put, now let's say for timing, I put some values one, one, one, one. Okay. Now you will just see if I put all the values, now it has been converted into a green mark. So similarly, we can use different, different model. Instead of let's say DIBP, I can use DI pulse, all this DI chip. So I can do that by selecting by this value selector.
Similarly, let's say now here in world temperature defined by reference subject. We can see here, this is an existing is let's say T wall. Instead of this, let's say I want a detail model. So I can go value selector. I can go into those T wall detail or maybe the wall solution. I can click okay. Then it will take me to these attributes and I have to fill those attributes, everything. Okay. This we will see during a case study. So now here I have explained you about the libraries.
I have explained you about these templates, objects and parts and then references. And then how to check which references has been used. We have just highlight depending parts on the map. And we can see using the dependency tab. Now these are the part of the flow. So this is the flow template. Let's say we want to see. Okay. Now here there are mechanical. So in mechanical. Again, this engine cranking template, we can see this object cranking and part engine. So this is a part of the mechanical.
So here in this mechanical, we can give details such as a cylinder geometry, where I can define the bow stroke, connect to grow length. What is the compression ratio? What is the clearance height? Piston to crank offset one and all other details. Now when we start Z2 power modeling, it's very difficult to understand now which value we should put and then which references we should use where and what is the significance of that. So therefore what I generally recommend is that you don't start with very complicated model.
You don't start modeling on your own. You always start with tutorials. Try to reproduce using those tutorial help find those models. Try to get those results. And then slowly, slowly move to the, let's say from single cylinder, move to the multi-cylinder, or let's say from a natural aspected engine to a turbo charge engine. So if you solve those tutorials, I think you can gain those expertise. And then once you open the particular tutorial, just go to the different, different objects or parts and then understand which particular reference model they have used.
Now, another important thing about another very useful, which I would like to show is that if you go to any template and just any part and double click towards the left, you will see the template help. If I click on that, let's say I want to understand this heat transfer object. So I have to just click on the heat transfer object and I have to just click template help. So it will directly take me to this heat transfer object of that particular engine cylinder. So this help will take, I'll explain me.
Now let's say it will show the name of the engine cylinder reference object used to define the heat transfer properties in the cylinder. So there's a hyperlink for that. Now it will understand what is, which are the different, different heat transfer models. So there's a Vashni, there's a Flow, Vashni Classic, Vashni Swirl. These are the different, different models, which I should understand that, which model I should use and why. So if you have the GTPower install, you need not to go anywhere. You have to just open the help file and read the document, that particular document related to that particular template and object.
It is very self explanatory. You need not to go to the, and refer any books for that. It is that strong. If I just see combustion object, just click here. Take me to the combustion object. And what do you, what do you mean by combustion object? Now in, if I just see combustion object. All right. Bye. Bye. Bye. So I hope you understood how to use the template help. It is very easy. You can click on any part and just click on the help template help.
So it will give you that particular template help. So if let's say anywhere you don't understand why they have particular such inputs or something, you can just open the help and you try to, you can understand that. You can read. So it is very exhaustive, this help file. Now I will explain you. So this is like is called a pre-processing. What do you mean by pre-processing is that building the engine model, taking the right template and then building this. So now once you build this planned model, let's say, now it is very important. So it's like there is a pre-processing, there is a solver and there is a post-processing.
So our interference is required during pre- and post-processing. Solver is a part of a software. So it's like we are not solving any equation. Computers will do it for you. So that is the best part of any software. So before that, we need to understand which are the different, different settings, which we should do. Now you can see different, different tabs here. That's a case setup, run setup. So let's go one by one. So if I go to the run setup, what you can see is that there's a time control file. There's the initialization, flow control, audio control, signal control, thermal control, and conversion sonnet.
So what do you mean by time control? So you will see that in time control flag, there's a periodic and continuous. So what is the difference between these two? So if anyone is interested, just you can go here and just say help. So it will directly take me to time control flag. And then it will tell me what is the difference between periodic and continuous. So periodic indicates that the model contains at least one circuit which contains a periodic event, that is engine cylinder cycle. So in our case, let's say that if there is an engine, engine template, obviously the engine template is a periodic event, that is every 720 degree, it repeats.
So four strokes. So to complete four strokes, it takes 720 degree, that is a two cycle, 180 degree, one stroke, then next 180 degree, second, third is again 180 degree, and four is one. So if you count, this total is 720 degree, nothing but a one complete cycle, four stroke, and then every one 720 degree, it repeats. Therefore, it is called a periodic. So if that is the case, we should select a periodic. If there is no periodic, then we can select a continuous. So now maximum simulation duration cycles. So either we can put in cycles or we can put into a time format, that is in second.
So one second, two seconds, or let's say 10 seconds, anything. So generally, it's good to put into a cycles. So 10 cycles, or maybe 20 cycles, 100 cycles. Then you can see this automatic shutoff when steady state, this is on initialization. So now initialization is like a previous case or user input. So that maybe we will understand during a case study. Now in flow control, you will see that there is something called time step and solution control, something called explicit. Okay. And if I go to the value selector, what I can see is that this is explicit recommended when high frequency dynamics are important.
For example, engine, acoustics, fuel injection, hydraulics. And if I see that are different, different templates available here. So I can see here is other than explicit, I can see is the flow control implicit and flow control QS. And that is a cause state, which is generally used in after treatment system. And this is implicit is used other than inch it or maybe where we have dynamics is not important. So let's say if there is a water pump or let's say a transmission or let's say cooling system, I need to do analysis of the cooling system.
Then I can go for the implicit. So if anyone is really interested, can go here and just understand what is the flow control explicit. So what do you mean by then Quran condition, Quran number, how is it important and then how it will have impact on the solution time. So we will not go into that being a numerical part. Then there is a ODE control. So in ODE controls, then we can select the which solo type integrator, let's say. Now by default, you will see this explicit, this Rangri-Kutta method, what you call it.
Or maybe you can select any other if you want. What I recommend is that we should not change all those settings in Run Setup other than this time control flag. And there is number of cycles. We should not touch this flow control and ODE control. At least when we are at the basic level. Slowly, slowly you will understand then when to change those methods. And then there is something called a convergence RLT and before that there is a thermal control. So thermal wall solver. So generally it is automatic or maybe if you want we can select steady state if let's say we know that our engine, what we are the case study we are doing is not transient, it is steady state points.
We can select steady state. But maybe let's say if you know that we are solving a transient case, then we can select the transient. Or if you can keep this automatic, there is no problem for that. And something called a convergence, the last step. If we want, we can add convergence other than the default convergence criteria mentioned in the GT-POWER. So what do you mean by convergence? If you remember, I showed you one slide where I was talking about a Navier-Stroke equation and then I told that there is a mass, momentum and energy equation which GT-POWER solves.
And then when being a numerical technique or numerical method, always it starts with some initial value and then it converts towards the exact value. And when by default it solves the mass continuity, it takes the mass continuity, momentum and then energy that is the total energy remains same. The total mass remains same. Mass is like at inlet and outlet should be same. So accordingly, then it solves its, but let's say other than that, let's say at one particular, I want to add, let's say, let's say in our engine, let's say one particular temperature.
Generally, what happens? This is what we see during the engine testing. Let's say if I change the engine speed and load, what I can say, the speed and load will reach a steady state immediately. Given the performance parameters, emission parameters, but this T4, that is the temperature after turbine, it will take more time to reach the convergence. That is with respect to time, because of this heat transfer convection with the ambient, T4 takes more time to converge, that is to reach a steady state value in testing.
Similarly, let's say if you are doing a GT-POWER model and then you want to solve that. So what you can do is that we can add this particular variable, let's say T4 here, and then we can add the convergence for that. So, so that even though the mass, momentum and energy is concerned, this solution should not stop until T4 is reached within, so you can define what, within what percentage or within what fraction you want that T4 to reach. That is within plus minus, let's say 0.01 degree centigrade, or let's say plus minus 1 degree centigrade.
Accordingly, my solution type will come out, so that, so if I add the convergence criteria here, it will check this convergence as well, in addition to what we have mentioned here, let's say if I go there, so these are the, if you will see this, these are the default settings, we generally don't change these values here, even this flow control also, if I go, so generally these default settings, we don't change. So in addition to this, then it will check this convergence. So this is about the run setup, now this plot setup, so now what happens, this preprocessing is done, now we solve the equation, that is, computer solves the equation, and then it converges, and after that, then now we want to see, what are the results, so when I say, now just say here, I want to run this, so now before running, if as I have directly open from the tutorial, if I just try to run this, it will not allow me to run, because we don't have permission to run this, because we don't have permission to run this, so what we should do is, we should go, we should say, file save as, and then we can create, let's say one folder, let's say, one cellar div, it's already there, but I will just replace no problem.
And now, if I run, so I can check, so I can check, what is the case setup here, that is at 3600, here, if I just say run, so when I say the run, what it is doing is, it is solving the equation, so now I can select here, how many cycles I should run, generally we can start with, let's say number 20, and then just say finish, so now GT-POWER will solve the equations at the background, so now you can see the number of iterations, so let's say, it started with case 1, period 1, 36 times 0, and then period 2, and then it calculated, now you can see this here, the flow steady state, so mass flow no, pressure no, so it means what, it has not converged, and then it will show that the variation, the percentage variation, so it is at connection 4, this is at high, and then it will tell you where the maximum time step is consumed, so now there is something called a current number, so what current number does is that, for that particular del x, it will calculate what should be the delta t, that is, how fast my solution should converge, or what should be the next time step, let's see, if I start from 0, so whether it should take the next time step, 0.1 second, or 0.01 second, or let's say, 0.001, so that depends on the current number, so current number generally, we follow for what is 0.8, which should be less than or equal to 0.8, so accordingly, it will calculate the delta t, and then it will move to the next, so we can see here, the next time step, it has taken at 6.66, And then we can see that, okay, now the pressure has converged. Yes, the mass has not converged yet. So it will move to the period number 4. Now, now you will see that yes. And there's something called 1, 1. So both are converged, but still it is solving the period 5. And then it is filling yes. So why it is so? Because if you just go back to our run setup, what we can see here is that we can see here that automatic shutoff when steady state, state is on. Maximum simulation duration is 20. So what we can see here is that our solution has converged at period number 5. So it has not gone up to period number 20. And then when it reached the steady state level, it has automatically solved. So what we, this is on. So now this is on. And second thing is about this 1D control. Now see what is the consecutive cycle steady state interval for steady state. I have mentioned here as 1.
Now let's do some changes. Now let's do some changes. Now instead of this on, if I put this off. Now see what is happening. I have to close this because I have, we have only one license. So it will not allow us to run. Now if I close, then it will allow us to run. Yes, I have to override those. Now see earlier it converged in 5 cycles. Therefore it stopped at the 5. But now see what is happening. I have automatic steady state. I have put this as off.
Now see what is happening. So it has solved till period number 20. Though you will see that the convergence is there. Let's say we got convergence in 5th cycle, 5th period. But you will see this. But you will see this. It is not checking any conversions. And it was checking convergence. But now it is not checking convergence. Because we are telling that, okay, just overhead that convergence. Let it run for 20 cycles. But obviously I don't want to do this, right? So always it's a best practice is that we should. In the run setup, we should put this on. So that even I can mention 20 cycles. It will stop at after it becomes reaches the steady state value. That particular solution will be stopped. What if it is not converged within 20 seconds. So it will be put accordingly. So let's say we know that it is converging at cycle number 5th.
So let's say I put 3 only. And if I just rerun this. Now see. Say now it has parent number 3. It is no. And therefore what it has given the warning. One or more cases in this model did not reach a steady state. And therefore if this is the error warning. What we should do? We should go back to the run setup. And you can increase this number of duration and keep this on. So even if let's say if I am not sure how many cycles it will take.
I can put here 100. But my automatic steady state should be on. So either you can change it here or while doing the run also it will ask the number of 20 cycles. So there also I can change it. So if I put 100 here and if I say finish. So it will not run till 100. It will run till it reaches the steady state and automatically it will shut off. Because we have activated that criteria. So this is the thing you should do while doing the run setup. Now let it run. So when it runs means what what it is doing. So it is solving all the equations and it is ensuring that mass momentum and energy is conserved.
So now at all components level. So now let's see if I now I want to see the results. I just click on the view results. Say open. Now it will open the GT post processing. So we are seeing now pre processing. We are seeing the raw solver. And now we are seeing the post processing side. It is taking time. What is happening. So now. It will open the GT post process. So it will show this no map. Standard map. Parallel contour map. Flow animation. So we can just click one by one. Let's say no map. Click on contour map. Directly it will show me.
So if you go to the pressure. So now each and every properties we can see what is happening. So what about the pressures. What about the temperatures. Let's say this 76. And then we enter into cylinder. It was very high. If I click on this cylinder. I can see in cylinder pressures, temperatures, one film. So now it has solved everything. So now one this is done. This all we have solved the model. Now we can check all the properties everywhere. So if I go here. RLT contour map. I can go to the individual parts and I can check. So now you can see here this plots case RLT time RLT. Now you see this only case RLT is activated. We cannot see any plots. No instantaneous plots were stored in this part. Only what we can see is the average pressure at that particular point. Now how to activate those. So if I go to now this integral. What you can see that in that particular part there.
There is a last time which is a plot. So by default GT will not activate the plots. It will keep all deactivated to avoid the unnecessary space. Because if I activate those plots it will consume memory. Right. During the. So my file will become huge. So we can select which we want. So let's say I want a pressure. It's a mass flow rate. It's a Mach number. Reynolds numbers. Anything. So from this flow I can select this. In thermal. I can go to the thermal tab. And I can see this. I want temperature. Fluid properties. I want to let's say density. Specific heat. Specific heat ratio. Anything. We can select. So we can just select anything.
something.
Part 3
Now, let's say pressure. Now, this is a pipe. If I just take here, what are the attributes of pipe? It has diameter of 40 mm, inlet and outlet same, and length is 120 mm. So now, when I see here, and go to the plots, what I can see? Pressure, but now at which location? Because length is 120 mm. So, location. So, if you see here, it will say the default. Default means at the center. So, the location are always in normalized format. That is 0 to 1. 0 means at the start and 1 means at the end. And 0.5 means at the middle. So, in the value selector, I can just select, choose the common locations, inlet, middle, outlet. So, that at three locations. Or, I don't want like this. Let's say I want to see everywhere. So, I can list specific custom. I can just list at 0.
0.1, 0.2, 0.3. So, I can mention like this. Okay. But just don't forget commas. So, that is 0, 0.1, 0.2. So, then it will show me at 10%, 20%, 30% of length. So, now let's say I want at three, these three locations. Say, okay. So, similarly, you can select where, let's say, if you want at more than one plus, let's say, instead of center, you want other locations also, we can mention that. But once you do this, we have to rerun. Because, then only it will show me the results here. As of now, if I go to the integer runner, I am not getting anything. Plots, it is telling nothing is available.
So, I need, I should start now. So, now, this is an end of the run. It is telling me, please, and if we can close this. So, already, this file was open. So, what it is telling is now, results have been updated and deleted from the latest model error. Please refresh to update the map, tripling and case information. I can just click on this green. So, it will automatically refresh. Now, if I go to the integer runner, now what we can see. Now, I can see plots.
And then, I can see at three different locations. So, either I can combine these three by clicking on this pressure static. So, these are the places. So, this is a periodic. Being a periodic, we have, let's say, an angle format. That is 720 degree. And then, we can see that how the pressure is traveling. So, this is a wave, right? Pressure. So, it's a compression and refraction. And then, during intake. Similarly, I can see mass flow rate. You can see the MAC number. I can see the Reynolds number.
So, depending on our requirement, we can select the plots. Unnecessarily, we should not select all. Otherwise, my file will become huge. So, we can select depending on our requirement. So, this is about the GD post-processing. So, now, we can have the control. So, let's say, plot setup. We can go there. And then, it will show me the already activated plots, which I have selected. Now, you can just to confirm. Because, in the integral number, we have activated this mass flow rate, density, Reynolds number, specific temperature, specific ratio, right?
Here, activated those. Then, it will show me the max plot range. So, here, I can do settings for all the plots, which are activated already by the user. And then, here, I can give location as 0.5 as a global value. Or, I can define the only. Let's say, I want everywhere. I will say, I want to see it everywhere at inlet. So, I can define 0 everywhere. So, it will report the values at inlet only. Then, there is something called output setup. What is this output setup? Now, output setup. Now, if I open that, you will find a different type.
Now, data storage. In data storage, we can see here, store case RLT results, storage levels, all, all. So, either I can store all this, or I can just say, I don't want to store anything. Let's say, I want to just see how it is running. I don't want to store anything. So, that I can save my time, and I can save my file size. I can reduce my file size. So, these are the different, different controls. Or, let's say, I want to suppress at one particular plots.
Let's say, I am running DOE of, let's say, 1,000 cases. So, for 1,000 cases, I should not store all those data, right? So, what I can do is, I can suppress. So, it will not store those plots. Anything, it will not store, if I select all three. So, this is useful when I am running more number of cases. Let's say, 100 cases, 150 cases, 200 cases, or maybe more than that. So, I need not to store each and every data. Once my DOE is completed, and then, I can find out the base combination, and then, I can rerun for that base combination, and then, I can get all the data for that.
So, in this output setup, we can have these settings, and then, we can avoid the use file size. We can reduce the file sizes. So, maybe, you can go through all those settings. As I said, you have to just click here, and then, it will show the help file. It will open the help file. Now, what is there in the advanced setup? If I go to the advanced setup, I recommend that we should not touch this as of now. But, you can just explore, whenever, let's see, if you have time, you can just explore.
I recommend you should not touch at this moment. There is something called optimization, and in optimization, we have this design optimizer, DOE setup. So, for this, I have kept one particular session. So, during that time, we will explore this optimization. So, this is about this run setup, plot setup, output setup, and advanced setup. There is something called a case setup. What do you mean by case? Now, if I just click there, what I can see is that, currently, there is only one case, and the engine is running at, let's say, 3600 RPM.
Now, I want to run this for, let's say, other speed also. So, how I can do that? So, let's say, what I can do is, here, I can select, okay, and I can just say, case, append cases. Let's say, three cases I have appended. So, let's say, 3600 RPM, then 3000 RPM. Let's say, then, 1800 RPM. These are the three I want to do. So, I can do that. So, I can create multiple cases, okay. And now, from where I got this RPM. Now, if I see this RPM, how do you see, show parameter, let, show parameters.
So, it will show me from which, from where I have used this parameter. So, if I go to this template, under this object, crank train, this is the engine speed define. So, we can go there, and you can find out. So, now, you can observe here, how this RPM is mentioned. So, now, let's say, this IBC, this is minus 95. This RPM, if I click, just here, 3600, so, this is only one case. So, I can run only one case. So, let's say, if I want to run 3000 RPM, so, I have to copy this entire model, and then, define there as a 3000 RPM.
Instead of that, so, that is not a convenient day. So, I can declare this as a parameter. It means, what, let's say, I'll mention RPM, then, if I see, now, once I declare that particular as a parameter, it will go into the case setup automatically, right? And this is, now, this, I can create a multiple cases here, let's say, 3000 RPM and 189. So, I need not to create multiple files. So, in the same file, I can run different, different cases. So, if I go to the run, now, if I run, so, now, it will run three cases.
Now, case number one, case number two, and case number three. So, end of run, press and again. So, either, so, if we now go to GT Pro, we have to just click on the results, this green line. So, now, what we can see is that, all three cases have been run. So, now, this is case number one. I can see for case number two. I can see for case number three. Or, I can go to no map. I can go to macros. I can see combined table data.
So, I can select all three cases. And, you can see engine and cylinder. So, I can see combine all cases in each table or repeat. So, let's see combined. So, what we can see is all three. Combine, right? So, how I got? So, I have to go to macros, combine, select, and just select everything, engine and cylinder. And, I'm just going to combine. I do, I will see. I do, I will see. So, I hope you understood that, let's say, how to run multiple cases by declaring one particular variable as a parameter.
So, it can be less engine speed, it can be failing, it can be start-off injection. So, I hope you enjoyed it. So, I hope you enjoyed it. So, I hope you enjoyed it. So, I hope you enjoyed it. Direction of injection. So we can declare anything. Let's say now if I want to, instead of injector mask, AT, I want to change this fueling for each case. So I can declare just square bracket and I can declare this MF. When I say OK, I will go to case setup. Now you can see this MF has been activated. Let's say now here is AT. Here let's say it was, let's say 70. Let's say here it was 60.
OK. So now speed is changing, fueling is also changing. So as I have defined now injector mask as a parameter, I can just simply change those values in a case setup. So that is the use of this case setup basically. So now these are the different, different tabs. Now what is important is that after this session, you just open this and then try to repeat what I have done. Just go to, now here, no need to worry about that results and everything. You have to just get introduced to the, this GUI of where, where is the file, where is open, where is saving, where is the plot setup, output setup, output run setup.
Because when, as we move with different, different sections, you should know that, OK, better to change that particular setting. That will be really helpful. Now, engine, right? In engine, I was asking you, or I was telling you that, how a GT-POWER will understand that this is, let's say, compression ignition engine or this is a SI engine. Unless it is single cylinder engine or multi-cylinder engine, what should the firing order. So, we need to understand the difference. Now, let's say, now in this engine, in this engine, what I understood is that I can define whether it's a force stroke.
So, I can change the engine, I can change the engine, I can change the engine, I can change the engine RPM. If I go to cylinder geometry, I can define what is a bore, stroke, corner lane, compression ratio, and then it is a clearance site. So, all those details, I can start filling. Now, this is a single cylinder. So, there is no firing order, but let's say, if it is a 6 cylinder, then generally firing order is 1, 5, 3. So, instead of 1, only 1, then I have to write this 5, then 6, then 2, then 2, sorry, 6, 1, 5, 3, 6, 2, then 4. And if it is a 6 cylinder, the firing interval is obviously the 120 degree.
Right? So, everywhere I should write 120. Now, you can see here, as this attribute is not complete, it is showing the error mark. Now, be careful, because even if I put 200 degree, right, what is happening? It is still showing me the green mark. So, that's what I was telling you, right? This is not intelligent. It will not tell you what is right, what is wrong. It will just tell you that, okay, there is, I am expecting some value there, we should put that value. So, if there is a blank, it will immediately put me some warning. But, it will not tell me what is correct and what is wrong. So, don't be under wrong impression.
Okay? So, if it is a 6 cylinder, I have to first define the cylinder number 1, 5, 3, 6, 2, 4. And then, firing interval. And then, it will understand, okay, this is now 6 cylinder engine. It is a 120 degree, right? Similarly, if you go to now cylinder, in cylinder, what I can define? I can define there is a combustion object, heat transfer object. Now, this combustion object is nothing but the rate of fuel burning, right? How the fuel is burn, at what rate it is burn, and how it is releasing the heat. That is related to the combustion.
So, now, this combustion is very, very important. So, in that combustion, there is two models available. One is called non-predictive and second is called a predictive. So, from the name itself. So, non-predictive means what? Non-predictive, the name itself. It is non-predictive. Means what? Whatever the input changes, it will not change the combustion object. Means, let's say now here, I have selected a combustion model, VBA. So, now, in this VBA, what you can see is this ignition delay, premix fraction, tail fraction, everything I have defined. So, I have fixed the shape of the burn rate. So, even if the speed of the engine is changing, fuel quantity is changing, start of injection is changing, it will not change how the in-cylinder, or how the fuel is burning inside the cylinder. So, that is called a non-predictive.
So, even if the parameters are changing, which are sensitive to the combustion, the combustion burn rate will not change. So, this kind of combustion models are useful when we are not doing an emission study, or we are just doing some laser turbocharger modeling, knitting manifold, exhaust manifold, tuning, wall timing, gas exchange analysis. So, where this performance and emission is not important. So, there we can use. So, I would say more than, let's say, 70-80% of time, we can use this non-predictive model, and then we can carry it out of work.
Let's say, now, if I want to predict, what about emissions, what if my change, my start-off injection by 2 degree or 3 degree, whether my BSFC will go high or low, or whether my NOx will increase. So, in that case, I cannot use the non-predictive. So, if I go to the value selector, you can see here, these two models, combustion DI, pulse, and DI, so they are the predictive combustion models. This is what, they will be sensitive to all the parameters. So, if I change the start-off injection, it will immediately show the change in the performance.
But, now, here, again, we cannot just take this default model and we can start. We need to tune those parameters. So, it's like, doing a predictive combustion model, it requires a lot of efforts, a lot of input data, a lot of test data is required. And then, I would say, it's not that easy. As a beginner, we should not touch that area. So, therefore, I'm not going into detail of the combustion side, non-predictive and predictive at this level is sufficient. Now, this heat transfer object. Now, this heat transfer object, if I see, whatever we have selected is washing.
And then, there is oral convection multiplier, head bore area ratio, and mid-piston bore area ratio. Now, if I just click on the help file, what you can see here is that they have defined, they have explained what is the washing. So, there are the different models. So, according to our knowledge and like our expertise, we can select these different models. But, to start with, we can go ahead with this either washing GT model or washing classic model. Now, what is the heat transfer? Now, heat transfer is nothing but what has happened.
When there is an in-cylinder combustion, tremendous amount of heat is released. So, that in-cylinder gas temperatures will go high. Now, obviously, when the gas temperatures go very high, that gas temperature energy is transferred to the metal, to the cylinder, through the convection. So, that is called gas to cylinder wall. Right? And then, from cylinder wall, depending on what is the engine application or what is the engine architecture, whether it is air cooled, liquid cooled. Now, if it is air cooled, obviously, the cylinder will have the fins.
Okay? Let's say, bike, bike engine. So, you will see that the bike engine has the fins and that is sufficient to maintain the temperature of the metal. But, let's say, if it is the power and torque output is on higher side, the air cooling is not sufficient. So, we should go with the liquid cooling and liquid cooling. So, what is happening now? Gas to metal through convection. Then, in the metal, there is a conduction. And, again, from metal to the liquid, there is a convection. Right?
So, accordingly, we can tune those parameters, convection multipliers. And then, we can tune the heat transfer object. So, one by one, we can go through each and every attributes and try to understand. Now, if I see here, in the combustion model, there is an emission model as well. In the advanced tab. So, if I see there is an ox object. So, as of now, it is ignored. But, if I want, I can just select. So, it will ask me which model I should use. Let's say, if I am using engine cylinder ox.
So, always, we have to once we create the object, we have to define. And, then, now, which model we should use. Let's say, extended gel to which. Again, if I want to understand what is extended gel to which, I can just click on the help. And, then, it will give me the details. What is the difference between extended gel to which and gel to which plus NO2. And, then, there are different, different multipliers by which I can tune my emission model. So, this is about the cylinder.
This is about the engine. Now, let's talk about the injector. So, this is the diesel injector. Now, this is very simple model. So, this is quite a very basic model where I have to just put the start of injection, injection duration. That's it. And, quantity. But, generally, this is not the case. It is not that simple. Because, finally, the burn rate, the in-cylinder combustion is sensitive to the injection rate profile. Why? Because, the rate at which fuel is injected is nothing but the rate at which the fuel is burned.
So, if I am injecting fuel at faster rate, it means it will burn faster. If it is burning faster, it means what the rate of heat release will be very high. If rate of heat release will be very high, it means what gradient of pressure will be high. Gradient of temperatures will be high. That means it will lead to the combustion noise, higher combustion noise. And, second is, if in rate of temperatures are very high, then it will lead to the combustion noise, higher combustion noise, higher combustion noise, higher combustion noise, higher combustion noise, higher combustion noise.
Very high in-cylinder temperatures, and then it will form NOx, NOx. So it is that sensitive. So that burn rate profile is very, very important. Now, as this model, the combustion model is non-predictive. As I said earlier, if I'm using the non-predictive combustion model, I need not to worry about all the inputs, other inputs, because once I fix the burn rate, even if I change my injection rate profile, or even if I change SOI or duration of injection, it will not impact the combustion. And therefore, if it is a non-combustion, non-predictive combustion model, if we are using, always recommended to go with this simple injector model. For a predictive combustion model, yes, then we should have the other injector models. So maybe that we can see during the CI combustion. Now, most critical part is this intake wall, intake and exhaust wall. Now, this camshaft and engine, there is a correlation, because camshaft runs at half the engine speed. Because to complete the four strokes, it requires two revolutions.
So every two revolutions, there is one cycle. And therefore, camshaft has to run only half the engine speed. Now, if I go to this intake wall, what we can see is that there is a timing, attribute length, flow coefficients, and output. Now, these flow coefficients are very important. Now, what is this flow coefficient? So what happens when we open the intake wall or we close the intake wall, there is some definite profile. So if I see here, this is how the intake wall opens and integral closes. So if I see here, it starts at this point, starts opening. So on the y-axis, there is an intake lift. On x-axis, there is the angle. So it has started opening. It is 0, and then started opening here at 0, 1, 1, 1 mm, maybe 2 mm, 4 mm, 6 mm. So there is a maximum opening. And then again, there is a closing. So there is the integral open. So this is called a wall opening duration from 360 degree. So if I see, let's say it is opening at, let's say, 10 degree before TDC, and let's say 40 degree after BDC, it is closing. So this is the complete intake duration. And therefore, what happens, the flow occupation also. It is a function of the lift. So this is a reference array, L by D ratio, what we call it, this is the flow occupation value. So what is this diameter? It is nothing but this wall reference diameter, or intake wall sheet ID. So I have to divide this diameter to the lift value. And if I divide this, I get the L by D ratio. And for that L by D ratio, I have to close the fold. Now from where we get this value. So there is a called a swell testing, where I have to test this cylinder head and I have to get this data. So this is very important. And then timing. So now with these attributes, I can change the wall dynamics.
Now this is 239. So you can observe here, right, these values. If I change this to, let's say, 230, now see what has happened. It has shifted towards left. Let's say if I put 250, now see what has happened. It has shifted towards the right. So using this cam timing angle, I can change the duration of integral opening and closing. And accordingly, and this is useful, let's say for variable wall timing. So this maybe we will see in this SI engine case story, where we'll be doing variable wall timing. So these are different, different attributes. So once we get used to all these templates, objects, after going through different different tutorials, we will start getting the feel that how the engine is modeled. And that is very, very, very important. And that was the target for our first session that to get introduction, get introduced to the GT-POWER basics and GT powers GUI. Now before we close, there's assignment for you. So what is assignment? So it's like explore the GUI of the GT suite. So just go open the GT suite.
Just understand where is how to open, how to save. Where are the settings advanced? What are there in? So we can list down. Even the models, let's say GT wall train, GT coolant, GT, because GT suite is the complete package. And under that we have GT-POWER, which takes care of the engine GT wall train, which takes care of only wall train system, dynamic analysis, GT coolant. So there are different, different models out there. So we can just go and list on all those. And then you can try to look at this following settings. Let's say where is the time control flag, time step and solution control, indicator and solver time. So you can look at this and you can just take the snapshot and put into the presentation, your presentation. So look at settings.
the time control flag, time step and solution control, integrator solver type. Then what you can do is, you can just go to the tutorials and you can explore this intercooler final. Maybe you can, given the snapshot. So you can just go to the tutorials and go to this six cylinder data goes number six, tutorial in the intercooler final, you just open. And all the settings are done in the run setup, advanced setup, plot setup and output setup. You can take the snapshot of that. And what you can do is, once you understand this, you first save as in your local folder, run this, understand what is happening at the pressure, temperatures and then you can solve this. You can change this setting. You can change the diameter to 50 mm, length to 1000 mm, mass flow rate to 1200 kg per hour at 100 degree centigrade. At inlet outlet, you can change the 2 bar and 30 degree centigrade. And then you can calculate what is the total heat transfer at charge or cooler. And then you can calculate the pressure drop across the CAC. So I hope you will complete this assignment before we start with our next session. And maybe if, if, what are your doubts, we can clear during that session. So that's it for today. Next session, we will start with the engine modeling techniques. Thank you. Bye. Bye.