Free · 3 lessons · no paymentIC Engine Calibration using GT-POWER and GT-SUITE: 3 free lessons
Free lessons from Skill-Lync's IC Engine Calibration using GT-POWER and GT-SUITE course. The first three lessons explain 1D simulation and the GT-SUITE template, object and part structure, review spark-ignition engine fundamentals with a single-cylinder SI model, and set up a four-cylinder, 16-valve naturally aspirated engine (73 mm bore, 89.4 mm stroke) from an example file.
Last updated 16 Nov 2026 · 3 free lessons (4 h 52 min) · full course: 12 lessons (18 h 43 min), paid · ₹40,000
Free lesson 1 · 87 minGT-POWER Intro, 1D Simulation and Template, Object, Part StructureWhat will you learn in the free IC Engine Calibration using GT-POWER and GT-SUITE lessons?
- What a 1D engine simulation resolves and what it does not
- GT-SUITE templates, objects and parts
- SI engine basics: injection, octane number, knock, compression ratio, BSFC
- Injector, Wiebe combustion, wall temperature and friction settings in GT-POWER
- Building a four-cylinder SI model from an example file
Free lessons you can watch now
Lesson 1 · 87 min · 3 partsGT-POWER Intro, 1D Simulation and Template, Object, Part StructureThe instructor outlines the course plan and explains what a one dimensional simulation approach means, using a pipe example where properties vary only along its length. The lesson launches GT-SUITE, tours the interface and template library, and explains how templates produce objects and parts, plus references, dependencies and value selectors.
Lesson 2 · 103 min · 5 partsSI Engine Basics and Single-Cylinder SI Model in GT-POWERThe instructor reviews spark ignition engine fundamentals, including components, port and direct injection, octane number, knocking, compression ratio and BSFC. The model walkthrough then covers the injector, lambda, cylinder initial state, wall temperatures, the SI Wiebe combustion model, friction, firing order and intake valve flow coefficients.
Lesson 3 · 103 min · 4 partsSI Engine Case Study: Four-Cylinder Model Setup from an Example FileThis case study builds a four cylinder, 16 valve naturally aspirated engine with 73 mm bore and 89.4 mm stroke, starting from a GT-POWER example file. It reviews the intake, throttle, cylinder, heat transfer and combustion settings, the 50 percent burn point as a function of speed, valve lift, friction and swept volume, then sets up full load runs at 6600 and 4600 rpm.
Which lessons of IC Engine Calibration using GT-POWER and GT-SUITE are free?
The first 3 lessons are free on Grow by Skill-Lync: 4 h 52 min of video from Skill-Lync's IC Engine Calibration using GT-POWER and GT-SUITE course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 9 lessons are listed in the outline below so you can see what each one covers.
How long is the IC Engine Calibration using GT-POWER and GT-SUITE course?
The full course has 12 lessons and 18 h 43 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 4 h 52 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid IC Engine Calibration using GT-POWER and GT-SUITE course on Skill-Lync, with mentor support and a certificate. For a career in Automotive, the Post Graduate Program in Hybrid Electric Vehicle Design and Analysis goes further with industry projects and placement support.