Lesson finished
Up next: GD&T Modifier Symbols: MMC, LMC, RFS, Projected and Datum Targets
Unlock all 65 lessons of Geometric Dimensioning and TolerancingFull course ₹40,000 · paid
Reading Feature Control Frames and the ASME Y14.5 Standard
A free lesson from Skill-Lync's Geometric Dimensioning and Tolerancing course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “GDNT: Understanding Feature Control Frames”
What will you learn in this free Geometric Dimensioning and Tolerancing lesson?
The instructor explains that a feature control frame is the language of GD&T and walks through each box, from geometric characteristic and diameter symbol to tolerance value, material modifier and datums. A flatness example is read aloud, followed by the history of the standard from Military Standard to ASME Y14.5 2009.
- Contents of each box in a feature control frame
- Minimum of 2 and maximum of 5 boxes per frame
- How to read a flatness callout of 0.3 mm
- History of ASME Y14.5 and the RFS change in 2009
What comes after lesson 2?
The next free lesson is lesson 3, “GD&T Modifier Symbols: MMC, LMC, RFS, Projected and Datum Targets” (37 min). Later in Skill-Lync's Geometric Dimensioning and Tolerancing course (paid): lesson 4, GD&T Lecture 2 - Segment 1; lesson 5, Understanding Form Tolerances in GD&T; lesson 6, Understanding MMC and LMC Conditions in GD&T. The full course has 65 lessons (13 h 6 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello everyone, welcome to my lecture series on GD&T. This is the second segment of the first lecture on GD&T. In the previous segment, we learned about the difference between traditional dimensioning and GD&T and then we discussed about the benefits of GD&T. In this specific segment, we are going to learn about feature control frames and then we will discuss about the technical standards that is ASME by 14.5, 2009. ASME stands for American Society of Mechanical Engineers. It is a society of mechanical engineers here in the United States and what they do is every 14-15 years, they would come up with a new set of standards based on GD&T and then we as a dimensional engineers have to apply those standards into our everyday work. So let's talk about feature control frame. If you see any drawing, any mechanical drawing in the current industry, you will see something like this.
So there are a lot of blocks over here. So there are a lot of boxes over here. So this ABC are basically the datums and then we have something called as the feature control frame. A feature control frame is nothing but a set of boxes that define the operator or tells the operator how to manufacture the part. For example, this is a feature control frame over here. This is another feature control frame over here. This one is one more over here. And then this one, this one, this one, this one. So there are total 1, 2, 3, 4, 5, 6, 7 and 8 feature control frames in this drawing.
Now as a beginner, it is very difficult to interpret the meaning of feature control frame. Believe me, when I stepped into this industry, I had a hard time understanding the meaning of this feature control frame. But as and when you start studying more about GD&T, the meaning of this feature control frame tend to pop out directly as soon as you look at them. So I would go one step ahead and I would say that feature control frame is basically the language of GD&T. So a feature control frame is nothing but a set of boxes like I said. So let's take this example over here. Assume I have a tolerance called out on any feature with this feature control frame.
If I tend to write this, the meaning of this feature control frame in text format, it will mean a position tolerance of 0.25 mm is to be applied in a circular tolerance zone for a feature at max material condition with respect to primary datum A, secondary datum B and tertiary datum C. Now assume an engine block. An engine block has thousands and thousands, not thousands I would say, but hundreds or not hundreds, tens or twenties holes as well as pins. Now it is very difficult to write this text over here for each and every hole and each and every pin. It would eat up the entire space of my drawing.
That is why the guys at the ASME, what they did is they came up with a compressed version of this text over here, which is known as the feature control frame. So basically feature control frame tells you the exact tolerance that we need to hold on a specific feature. A feature is nothing but a hole or a pin or a tab or a slot over here. So, this is a circular pin over here or we have something called as a surface. So, a feature control frame tells you what tolerance we need to hold on that specific feature.
A feature can be a hole, it can be a pin, it can be a tab, it can be a slot or then we have something called as surfaces. So, every feature control frame is composed of a geometric characteristics, it has a tolerance zone shape, it has a tolerance zone size, a material modifier and datum references. Now, a general feature control frame or a generic feature control frame will have five boxes. So, these are the five boxes over here. This is the first box, this is the second box, third, four and five.
Not all feature control frame have five boxes, but in generally, most of the feature control frame or the max amount of boxes in a feature control frame can be five. So, the first box is always the geometric characteristics. Now, I understand we have not studied the geometric characteristics. So, this is nothing but a symbol of the geometric characteristics. Now, there are 14 different tolerances in GD&D. Each tolerance, it has a specific symbol. For example, flatness has a symbol like this, perpendicularity has this symbol over here and this is a position symbol.
And similarly, we have 14 different symbols. So, the first box tells you what kind of tolerance I need to hold. So, do I need to hold a position tolerance? Do I need to hold a perpendicularity tolerance? Do I need to hold an angularity tolerance? And so on. So, the first box tells the operator what kind of tolerance I need to hold. If it is a surface, something like this and I need to control the profile of the surface or I need to control the variation of the surface, in that case, I will give something called a profile of a surface.
So, this symbol would come over here. Again, we have not discussed all these 14 types of tolerances as of now. But, down the line, we will discuss each and every tolerance in detail. And then, you would be able to connect all the dots in back and create a perfect feature control frame. For now, just understand that the first box tells you what type of tolerance I hold. There are 14 different types of tolerances and this box tells you what tolerance I hold. Either apocalyptic clarity, angularity, position, circularity, etc.
The second one is the tolerance zone shape. Tolerance zone shape comes into picture anytime when I have to give a tolerance to a hole or a pin. So, let's say I have a pin over here. This is a pin over here. And I have to give a position tolerance to this pin. In that case, a pin is a circular feature. So, I have to put a tolerance zone shape phi, which means the diameter of 0.25 in this case. If it's a hole, a hole is a circular feature.
So, I have to put a tolerance zone shape of phi over here. If it's a tab, a tab is something like this or if it is a slot or a rectangular slot. In this case, these are not circular features. So, we will eliminate the tolerance zone shape. We won't put anything over here if it's not a circular feature. The phi will come only and only if we are putting the tolerance to a pin or to a hole. Then comes the tolerance zone size. This is very important in the feature control frame.
What it does is that it basically tells the operator what kind of tolerance I need to hold or what amount of tolerance I need to hold. For example, in this case, what it tells me is that I have to hold a position tolerance of 0.25 millimeter. Please take a note that this number is always in millimeter unless and until specified in the drawing that it is in inches. So, if nothing is specified in the drawing, by default, we have to consider this number in millimeter. If there is a specific mention that all dimensions in inches, then we have to consider this number in inches.
Then we have something called as a material modifier. Again, we have not studied the material modifier as of now. We will study about it. For now, just understand that it is something that defines the tolerance or it is something called as the bonus tolerance. And then we have datums A, B and C. So, again, the first box is the geometric characteristics. The second box contains the tolerance zone shape. Again, the tolerance zone shape 5 will only and only come if we are giving the tolerance to a hole or a pin.
Then we have the tolerance zone size. That is the number or that is the amount of tolerance that I want to hold on that specific feature. Then we have a material modifier. And then we have the datums. So, 1, 2, 3, 4, 5, 5 number of boxes, that is the maximum box any feature control frame can have. Let's take another example over here. Pardon me, this picture is not so clear. But I hope this is visible to you. Again, what this feature control frame reads? It reads as the position of the feature must lie within 0.003 diametrical tolerance zone at a maximum material condition relative to datums A and at maximum material condition and B.
So, again, this one has, this is the geometric characteristics which tells me what type of tolerance I need to hold. In this case, it is a position tolerance I need to hold. Now, I have given a phi over here. It means that this tolerance is going to a circular feature. It means that it is either going to a hole or it is going to a pin. So, this kind of defines you the shape of the feature. So, the first one tells me what type of tolerance I need to hold.
Second one tells me it is either a pin or a hole. The third one over here tells me the exact amount of tolerance I need to hold. In this slide, nowhere is mentioned that all dimensions in inches. So, by default, I will take this as millimeter. Then, we have a material modifier. Again, we will talk about this material modifier down the line. Then, we have the A datum over here, which is the primary datum and this is the secondary datums. So, in this case, the amount of boxes are 1, 2, 3 and 4, which is perfectly fine. The minimum amount of boxes we can have in any feature control frame is 2. 2 is the minimum number of boxes and the maximum number of boxes we can have in any feature control frame is 5. 5 is the max boxes.
So, the number of boxes can lie anywhere between 2 to 5. Now, let's talk about some of the examples of feature control frame. Let's take the first example over here. Let me emphasize again that we have not gone through the different types of tolerances. So, like I said, there are 14 different types of tolerances and we have not gone through all of those. We will go through them one by one down the line. But, for now, just understand that the first box always tells you the geometric characteristics.
So, the first box tells you what type of tolerance we need to have. In this case, this is a specific symbol for flatness tolerance. So, what it means is that I need to hold a flatness of 0.3 millimeter. So, a flatness of 0.3 millimeter. That is what the meaning of the first feature control frame is. Again, nowhere in the slide does it say that all dimension in inches. So, by default, we consider this number 0.3 millimeter. So, the second number, if I go to the previous slide, we would know that the second number or this number over here tells me the amount of tolerance that I can hold.
Again, do we see a phi symbol over here? No. It means that this specific tolerance is not applied to any pin or a hole. Flatness is a surface specific tolerance. So, this is applied to a surface. Hence, we do not give a phi symbol over here. So, this is the smallest feature control frame you can have in GD&T which means that flatness of 0.3 millimeter on any even surface. Now, let's go to the second feature control frame. This symbol over here means perpendicularity. What this means is that I have to hold a perpendicularity of 0.003 with respect to B data.
Okay. So, do I see a phi symbol over here in front of 0.003? No. It means that this specific perpendicularity is either given to a tab or it is given to a slot and with respect to B data. So, the first one defines the geometric characteristics or the type of tolerance that I need to hold. The second block defines the amount of tolerance I need to hold. And the third block, fourth block and fifth block defines I need to hold the tolerance with respect to which data.
So, this means that the tab or the slot can have a perpendicularity of 0.003 millimeters with respect to B data. Again, we will talk about this M in later lectures. This is a deep concept and we need to learn more about it before actually understand and actually apply the maximum material modifier. Now, let's go to the third feature control frame. Again, the first block over here means the type of tolerance. This specific symbol is used for position tolerance. So, from this symbol, I understand, okay, I have to give a position tolerance.
The second box over here tells me the amount of tolerance. So, I know the tolerance is 0.03 millimeter. Now, I see a phi symbol over here. That means that this specific tolerance or this specific feature control frame is either applied to a hole or to a pin. With respect to a data. This is another type of feature control frame which is known as the tolerance total runout. What this specific feature control means is that I have to apply a total runout of 0.05 with respect to data A and data B.
Again, this tells you the geometric characteristics or the type of tolerance. This tells you the amount of tolerance. And this, the other two boxes tells you which datum I refer to while applying the tolerances. And finally, going back to a very generic feature control frame. This is a very generic feature control frame which has five boxes. 1, 2, 3, 4, 5. The first box tells me about the geometric characteristics or the type. In this case, this is a position tolerance. I see a phi symbol over here which means that this feature control frame is applied to is either a hole or a slot.
0.03 tells me the amount of tolerance that I have applied to the hole or the slot with respect to datums A, B and C. Total amount of boxes 1, 2, 3, 4 and 5. Five boxes. That's the maximum amount of boxes you can have in any feature control frame. Now, let's talk about the placement of a feature control frame. Like I said, a tolerance can either be given to a feature or a surface. A surface is nothing but a surface. A feature is anything that can be hold between a vernier caliper which has two opposite ends.
A feature can be a hole or a pin, it can be a rectangular tab, it can be a rectangular slot or it can be a hollow slot as well. So, a feature control frame or a tolerance with a feature control frame can be given to a surface or it can be given to any feature. Feature can be a hole, pin, rectangular tab, rectangular slot or a hollow slot. So, if I have to give a feature control frame to any surface, I have two ways that I can do that.
First way is I can simply extend a line from that surface and give a feature control frame to that surface over here. For example, if you see the tolerance over here, this specific tolerance, what the designer has done is he has simply extended a line from that surface all the way down and given a tolerance to that surface. So, the one way of giving or placing a feature control frame on a surface is by simply extending the line all the way down and attaching the feature control frame to that surface.
The second way of applying a feature control frame to a surface is by simply pointing the feature control frame to that specific surface with the help of an arrow. For example, take this feature control frame over here, a profile of 0.1 to this specific surface. How do I know that this feature control frame is attached to this specific surface over here? Either I can extend a line all the way and give my feature control frame or I can write a feature control frame and simply point it to that specific surface.
Both the methods are right in placing a feature control frame to a surface. When it comes to a feature or a hole or a slot or a tab, what we do is we apply the feature control frame directly to the dimension. Example, this case over here. Now, this is a hole of diameter 0.5 mm with a tolerance of 0.005 mm. I have a position tolerance on that hole. So, this is a hole. So, it's a feature. It's not a surface. It's a feature. I can actually take my vernier caliper, put a point over here and put a point over here and measure the distance between these two points.
So, this is a feature. This is not a surface. For features, what we do is we place the feature control frame directly below the dimension over here. So, we give the dimension over here and put the feature control frame below the dimension. We are going to talk more about the difference between surfaces and features as we go down the line. But this is just an example how to place a feature control frame to any surface or a feature in a drawing. Now, let's revise what we have talked all the way.
We mostly talked about feature control frame. Again, a feature control frame is a language of GD&T. What it does is it tells the operator how to manufacture the specific feature or the specific surface. Feature control frame, the short form is F-C-F. It can be either applied to a surface, surface is nothing but a surface, it can be applied to a surface. A feature can be a hole, it can be a pin, it can be a slot, it can be a rectangular tab, or it can be a rectangular slot.
So to define the tolerance on the surface or a feature, we use a Feature Control Frame. The max amount of boxes we can have in any Feature Control Frame is 5. The minimum amount of boxes we can have in any Feature Control Frame is 2. The first box will always tell you the geometric characteristics of the Feature Control Frame or the Feature. So basically, it's the type of tolerance that I want to apply for that specific feature. So this can be a position, a flatness, a perpendicularity, a profile, anywhere of any of these 14 different types of tolerances used in GDMT.
The second block tells me the exact amount of tolerance that I want to hold on that specific feature. If there is a Feature Control Frame over here, it means that this specific tolerance over here is either applied to a hole or it is applied to a pin. If it is a rectangular tab or a rectangular slot, we will simply remove the Feature Control Frame. 0.25 tells me the amount of tolerance that I need to hold. Again, 0.25 is always in a millimeter unless specifically specified in the diagram or the drawing that this is inches.
And ABC tells me the reference datums. So we have the geometric characteristics, the tolerance zone shape, the tolerance zone size, and then we have the datums. This five boxes together make a Feature Control Frame. Now let's talk about standards. So the most current standard that we use in GDMT is ASMEY 14.5 2009. This was published in the year 2009. That's why the number 2009. Standards can be traced back all the way to 1950s. The first standard of GDMT was something called as Military Standard 8. After that came the Military Standard 8 A, B, C.
Then we had something called as ANSI Standards. And then finally we had ASME Standards 14.5 M 1994. And then the latest one we had is 2009. The main difference between ASME 14.5 M 1994 and ASMEY 14.5 2009 is that in 2009 they introduced a concept called as RFS. Which is regardless of feature size. We will talk more about RFS modifier down the line. But for now, just understand that the only difference between 1994 and 2009 is the introduction of the concept called RFS. Otherwise, the standards ASME 1994 and ASME 2009 are exactly the same.
Now we talked about Feature Control Frame and we also talked about the standards that govern GDMT. Now let's have a quiz. This is the first quiz that we have in this segment over here. There are a couple of questions in this slide as well as the next slide. And please try to find the answers online. In the second questions, I understand that you won't be able to find the meaning of this geometric characteristic right away. So you can refer the internet to find what this exact tolerance or what this symbol means.
And then you can simply write the text meaning of this tolerance all the way over here. So this ends the second segment of the GD&T Lecture 1. Thank you.