← Course overviewFree lesson 1 of 3 · lesson 1 of 9Next lesson →

Unlock all 9 lessons of CAE Simulation using SolidWorksFull course ₹40,000 · paid

Price & syllabus
Free lesson · 29 min · no payment

FEA Basics and the Analysis Types in SolidWorks Simulation

A free lesson from Skill-Lync's CAE Simulation using SolidWorks course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to FEA using SolidWorks”

What will you learn in this free CAE Simulation using SolidWorks lesson?

The instructor explains finite element analysis, the stress strain curve and the pre-processing, solving and post-processing steps. The lesson covers triangular and quadrilateral elements, H and P mesh refinement, 1D, 2D and 3D elements, and the SolidWorks study types from static to drop test.

  • Regions of the stress strain curve and Hooke's law
  • Linear versus nonlinear static analysis
  • H refinement versus P refinement of a mesh
  • When to use 1D, 2D or 3D elements

What comes after lesson 1?

The next free lesson is lesson 2, “Static vs Dynamic Analysis and a Plate With a Hole in SolidWorks” (18 min). Later in Skill-Lync's CAE Simulation using SolidWorks course (paid): lesson 4, 1D/2D/3D FEA Analysis on a Uniform Loaded Cantilever Beam; lesson 5, Buckling Analysis of Cyclonic Separator Stand; lesson 6, Help video for Buckling Assignment. The full course has 9 lessons (3 h 39 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Part 1

Hey everyone, welcome to a new video in finite element analysis using SOLIDWORKS. So in this video, we'll be discussing the basics of FEA and briefly looking on the various analysis system present in a SOLIDWORKS simulation module. So let's begin with the presentation. Finite element analysis is popularly abbreviated as FEA. So in this analysis method, we use finite element method to solve structural problems. Here, the whole model is discretized into small elements which consists of nodes on which the governing equations will be solved. Once the governing equations are assembled for the whole model, several matrix solving techniques are employed to solve for the unknowns.

Once we know the values for displacement, so we derive the stress and strain contour plots for the whole model. So the popularly used FEA packages are SOLIDWORKS, Ansys and ComSol. Apart from these commercial packages, there are several open source FEA packages available like CodeAster and several others. You can even try them out to begin with. So now let's move on. So this is the stress strain plot for a material. For every model that we use in a finite element analysis, it is going to be made up of a material.

So each material will have its own characteristics which is vital for a finite element analysis. To get this stress strain graph for a material, we perform tension test on the material and plot the strain for the stress developed due to the loads applied. Let's discuss this graph in detail. So once we complete the experiments, we have the strain plotted in the x-axis and the stress plotted along the y-axis. Let's rename the origin as O. As the load is increased, we plot the corresponding strain along with the stress to get this stress strain graph.

Once we get this stress strain graph, so we divide the curve into different regions depending upon how the material behaves. First, between the points O and A, the material tends to behave linearly. That is, the stress value is linearly proportional to the strain produced. Now, so within this region, if we unload the loads that we have applied on the material, the model regains back to its original shape without any deformation. Hence, this region is called limit of proportionality and A is the elastic limit point. And within this region, the Hooke's law is valid.

That is, stress is going to be linearly proportional to the strain produced. Once the material passes this elastic limit, it tends to move into a plastic region where there is small deformations even after unloading the loads on the material. Now, as the plastic deformation sets in the material, the maximum value of stress and the minimum value of stress produced during the plastic deformation denote the upper and lower yield stress point of the material. If we increase the load even further, we reach a point called the ultimate stress point which gives the value of the maximum stress the material can withstand.

As we pass this ultimate stress point, we end up in a rupture point which denotes the breakage or the failure of the material. So, this is how the stress strain graph is divided into several regions. Once we have plotted this graph, we derive other material properties like Ensel modulus and Poisson ratio to define the materials. You will be provided a reference material and a challenge to work on to refresh your concepts on the basic terms involved in a FEA problem. So, let's move on with the presentation now.

Static Analysis Static Analysis As the name suggests, simulation is going to be independent of time. That is, the loads applied are not dependent upon time. Df by dt is going to be 0. Hence, we call it as a static analysis and this static analysis is broadly classified into linear and nonlinear analysis. So, as the name suggests, there is a linear relation between the stress and strain in the linear analysis. While on the nonlinear analysis, the relation is no longer linear. Secondly, in the linear analysis, the material obeys Hooke's law and the deformations are small.

But, on a nonlinear analysis, the deformations are large and will not be proportional to the load applied. Finally, the material properties are assumed to be constant in a linear analysis and hence, this type of analysis can be applied only within the elastic limit. But, in a nonlinear analysis, the material properties along with the nonlinear relation is included so that after each iteration, the stiffness of the material is updated to capture the nonlinear effects in the simulation. Since it is going to update the stiffness value for the material after each iteration, it is computationally heavier than the linear analysis.

Now, in SOLIDWORKS, if you perform a linear analysis on a model, you tend to assume that your stress values are between O and A. And, in case if you tend to increase the load beyond this limit, your solver tends to follow a path which is unreal. Your stress value tends to increase linearly even though there is a realistic nonlinear path available. Further, if the solver detects large plastic deformations in the model and you are performing a linear analysis, it will prompt whether you want to switch the analysis into nonlinear.

And, if you agree to that, the solver will convert the simulation into nonlinear simulation and proceed. Else, it will take this path and give you the corresponding results. Let's move back to the presentation. Any FEA problem involves three major steps. The first one is preprocessing, the second is solving, and the final part is the post-processing. In the preprocessing step, we define the material properties for the model and then discretize the whole model into small elements. So, this process is called meshing. After meshing the model, we define the loads and constraints for the solver to proceed with the solution.

In the solution process, depending upon the type of analysis, the solver employs different algorithm to solve for the unknowns. And, after the solution is done, the derived quantities like stress, strain are then calculated. In the post-processing, we will be looking at the different stress and strain contours that is produced after solving the FEA problem. These plots will be used to generate the report on the analysis done. Let's first talk about meshing. So, SOLIDWORKS majorly uses two types of elements, that is the triangular and the quadrilateral elements.

In a basic triangular element, we have three nodes. And, in a basic quadrilateral element, we have four nodes. Now, any model that we will be using for a finite element analysis will consist of intricate shapes and profiles that need captured even after discretizing them. Hence, depending upon how complex your model is, your mesh needs to be refined. Further, after performing any simulation, to check the accuracy of the results, we perform grid dependency test. That is, we run the same simulation by refining the mesh up to a point where the results do not change even after refining the mesh further.

So, this is called the grid dependency test. For any mesh refinement, we have two methods that SOLIDWORKS provides us with. One is called the H refinement and the other is called the PE refinement. So, in the H refinement, we refine the mesh by including more elements into the model. While in the PE method, we keep the number of elements as the same, but we tend to increase the order of the element that we are using in the model. Also, in the H method, since we increase the number of elements, we tend to decrease the characteristic length of each element.

In the PE method, the characteristic length remains the same, while we increase the complexity of the shape functions that is included in the element. Look at an example on how a H refinement and a PE refinement mesh would look like. Here, in the figure number one, we have the original mesh. We have this rectangular geometry which is discretized. So, in the second, we have the H refinement and in the third diagram, we have the PE refinement. Originally, the mesh consists of six elements. When it is H refined, you can see the number of elements have been increased by a factor of four.

And these factors can be user-defined. Hence, you can control the number of elements you want to include. As you can see, we have refined the mesh by increasing the number of elements using the H refinement mesh. Finally, in the PE refinement, even though the number of elements remain the same, we have introduced mid-side nodes to increase the degree of the element being used. We end up using a higher order element to get accurate results. So, thus, we use PE refinement to increase the order of the element used in our mesh.

Now, let us proceed with the presentation. In FEA, depending upon our requirement, we tend to reduce the computational power required to solve a problem using different types of analysis. So, depending upon our requirement, FEA analysis consists of 1D, 2D and 3D analysis. First, let us start with 1D. So, if your FEA analysis consists of a model which has one of its dimension significantly larger than the other, then we tend to go for a 1D analysis. So, if the model that you are going to use in your FEA analysis has a dimension which is significantly larger than the other dimensions, then we tend to go for a 1D analysis to obtain the required results.

For example, let us consider a long beam and I am interested in looking at the deformations caused by bending. Since the beam is long enough, a 1D analysis is sufficient to produce the required results. 1D elements are basically used to represent long members like beam and hence they help reduce the computational power required to solve the problem. Now, 2D elements that are basically referred to as shell elements and these shell elements are provided with the thickness to actually represent the model. So, these are predominantly used when we have thin sheets and shell structures in our model and further we can accurately derive bending stress on the path.

Using this type of elements in the simulation helps in getting accurate results with a less computational effort than going for a 3D. Now, finally the 3D. Once, if you have obtained all the required results from 1D and 2D but still you want to understand the stress produced on the whole model, You tend to go for a 3D analysis which is computationally heavier. We have solid to represent the models here. Finally, after the simulation is done, we look at the various stress and strain plots to infer our findings from the simulation. We will be looking at how to perform a 1D, 2D, and 3D simulation on a beam problem in the next video.

So now let's move on. SOLIDWORKS simulation module consists of various analysis systems specifically designed to solve different types of FEA problems. First one, we have the static problem. Here as the name specifies, we assume the forces are independent of time and it helps us to calculate the stress, strain, the displacement produced for applied load in the form of a point, surface, or a thermal load. This is basically about the static module. Now in the FETIC, when you have a model which is going to be acted upon by a repeated load and you want to study the failure of the material due to such kind of a load, we use this FETIC model.

From the FETIC analysis, we will be able to understand the behavior of our model under cyclic loads. In the frequency model, we will be able to analyze a model which is subjected to a force and the body vibrates at a certain frequency. As we all know, every body has its natural frequency and this natural frequency can be found out by using this frequency module. From this type of analysis, we can look at different mode shapes associated with the model. So in the buckling model, apart from the failure due to the material strength, a lengthy member like a beam can fail due to axial instability.

So such kind of analysis can be performed using the buckling model and SOLIDWORKS helps us visualize failure of a model subjected to axial load by calculating the multiplication factor to predict the failure. Here SOLIDWORKS plots the buckling load factor which will help us predict the failure due to buckling. In the thermal module, we will be able to study the temperature gradients and temperature fluxes in the body due to loads like conduction, convection and radiation. Next, in the optimization, every finite element analysis is performed to obtain the optimum design.

So for us, the optimum design may be the one with the least mass or the least stress. So depending upon our requirement, we can ask the solver to iterate between different values of the dimensions and arrive at the optimum design parameters. This module will be very useful in performing optimizations. Now, next we have pressure vessel design. So SOLIDWORKS has a special module which is customized for a pressure vessel design. And this module helps you perform typical analysis that is usually done while designing a pressure vessel.

Now, to the vibration part. Here, the loads are specified as power spectral density functions. Don't worry if you are unfamiliar with this term. You will be provided with proper materials and references to know more about them. Right now, just understand that there is a module which is going to help you analyze the vibrations present in a model and look at the stresses that are developed on a long period. Finally, we have the drop test. So as the name suggests, if you want to look at the stress strain on a model when it's dropped, we go for this module.

Here, the solver uses explicit time integration to plot the stress and the strain contours at the time of impact. Here, we initialize the simulation by providing our initial velocity and adding the gravity to the physics that is included in the solver. So, I hope that this lecture gave you a brief idea about what FEA is about and how SOLIDWORKS has different modules to help us perform various analysis on our model. So, thank you guys for watching. I will see you guys in the next video. Bye.

Part 2

Hello दोस्तों, SOLIDWORKS का use करते हुए finite element analysis के एक नए वीडियो में आपका स्वागत है. इस वीडियो में हम FEA basics पर चर्चा करेंगे और संक्षिप में SOLIDWORKS simulation module में मौजूद different analysis system को देखेंगे. आईए presentation से शुरू करें. finite element analysis लोगपरिया रूप FEA के रूप में संक्षिप्त है. इस analysis method में हम structural problems को solve करने के लिए finite element methods का use करते हैं. पूरे model को small elements में change कर दिया जाता है, इसमें nodes होते हैं, जिस पर governing equation solve किये जाएंगे.

एक बार पूरे model के लिए governing equation को इखटा कर लिया जाए, फिर बहुत सारी matter solving techniques अग्याद चीजों को solve करने के लिए employed हो जाती हैं. एक बार हम displacement की value जान लेते हैं, तो पूरे model के लिए stress and strain counter plot कर लेते हैं. इसलिए commercial package के अलावा, SOLIDWORKS के लिए low prayer package, FEA analysis और console हैं, कई open source FEA package उप्रब्द कराते हैं, जैसे go daster और कई अन्या, शुरू करने के लिए आप उन्हें try करने की कोशिश कर सकते हैं.

तो चलिए आगे बढ़ते हैं, ये एक material के लिए stress strain plot है, हर model के लिए जो हम एक finite element analysis में use करते हैं, ये physical material से बना है, इसलिए हर material की अपनी विशेशताए होंगी, जो एक finite element analysis के लिए महत्वपूर्ण है. एक material के लिए दिल्चस्प graph प्राप्त करें, और हर material पर tension test करते हैं, और strain plot करते हैं, जो की applied load के कारां stress से develop हुआ है. आईए graph के बारे में विश्तार से चर्चा करते हैं, एक बार जब हम प्रियोग पूरा कर लेते हैं, हम x-axis में strain plot करते हैं, और y-axis के साथ stress को plot किया जाता है, आईए 0 के रूप में origin का नाम बद रहें, क्योंकि load में increase हुआ है, हम graph के इस test को प्राप्त करने के लिए stress के साथ strain को plot करते हैं, एक बार जब हमें ये stress strain graph मिल जाता है, तो हम curve को different region में divide करते हैं, और जो इस बात पर depend करता है कि material कैसे behave करता है, पहले point O और A के बीच material linear रूप में behave करता है, ये stress value strain produce के leniently proportional होती है, अब इस region के अंदर, यदि हम उस load को unload करते हैं, जो उस material पर apply किया जाता ह तो model बिना deformation के अपने original shape में वापस हो जाता है, इस region को element of proportionality कहा जाता है, और A elastic limit point है, इस region के अंदर hooks law valid है, जो कि stress पैदा हुए strain के linearly proportional होता है, एक बार material elastic limit को pass कर लेता है, तो ये plastic region में चला जाता है, जहां material पर load उतारने के बाद भी एक small deformation होता है, चुकि plastic deformation material में set होती है इस stress define करता है, plastic deformation के दोरान produced stress की minimum value और maximum value material के stress point के upper and lower yield को दर्शाता है, और यदि हम load को और बढ़ा देते हैं, तो हम ultimate point तक पहुँचते हैं, जिसे last stress point कहा जाता है, और ये maximum stress की value के साथ strain करता है, जैसे ही हम ultimate stress point से गुजरते हैं, हम rupture point के साथ समाप्त होते हैं, जो हमें breakage और material की failure को दर्शाता है, आप देख सकते हैं कि कैसे graph घूम जाता है, और ये कई region में divide है, एक बार जब हम इस graph को तयाय कर लेते हैं, तो material properties को प्राप्त कर लेते हैं, जैसे कुछ भी ends, modulus या poisoned ratio जो material को define करते हैं, आपको FEA problem में Isaac terms और concept को refresh करने के लिए reference material और एक challenging work provide किया ज analysis, जैसा कि नाम से पता चलता है कि simulation time के साथ सुतंत्र होने वाला है, जिसका मतलब है कि applied load time पर depend नहीं है, df by dt 0 होगा, इसे static analysis कहते हैं, इस static analysis को broadly linear और non-linear analysis में classified किया गया है, जैसा कि नाम से पता चलता है कि linear analysis में stress और strain के बीच linear relation है, जबकि non-linear analysis पर relation linear नहीं है, सुरक्षित रूप से linear analysis में material hooks law पर चलता है, और deformation small होती है, लेकिन non-linear analysis पर deformation बड़ी है, और applied load के लिए proportional नहीं होती, at last material properties को एक linear analysis में constant माना जाता है, इसलिए इस प्रकार के analysis को किवल elastic limit के अंदर ही apply किया जा सकता है, लेकिन एक non-linear analysis में non-linear relations के साथ material properties को भी शामिल किया जाता है, ताकि प्रतिय एक attrition के बाद stiffness हो, material को update किया गया है और non-linear effects को capture किया जा सके, चुकि हर एक attrition के बाद material के लिए इस stiffness value को update करने जा रहा है, ये SOLIDWORKS में अब linear analysis की compare में computationally heavier है, यदि आप SOLIDWORKS में एक model पर linear analysis करते हैं, तो आप ये मान लेते हैं कि आपका stress value O और A के बीच है, और यदि आप इस limits से अधिक load increase करते हैं, तो आपका solver path को follow करने के लिए बाद्धे हो जाता है, जो unreal है, बले ही वहाँ realistic non-linear path उपलब्ध हो, लेकिन stress value linear रूप से बढ़ती है, अगर solver model में बड़े plastic deformation का पता लगाता है, तो आप एक linear analysis कर रहे हैं, तो ये संकित देगा कि आप analysis को non-linear में switch करना चाहते हैं या नहीं, अगर आप इस बात से agree हैं कि solver simulation को non-linear simulation में change कर देगा और आगे process करेगा, otherwise ये इस path को चुनेगा और आपको उसके according result देगा, अगे presentation पर वापस चलते हैं, किसी भी FEA problem में तीन promote steps होते हैं, first pre-processing, second solving और last post-processing, pre-process step में हमने model के लिए material properties को define किया है, और फिर पूरे model को छोड़े-छोडे भागों में बांट दिया है, इस process को meshing कहा जाता है, model को mesh करने के बाद solver के solution के साथ आगे बढ़ने के लिए हमने loads औ constraints को define किया है, solution process में analysis के type के आधार पर solver unknown के लिए solve करने के लिए different algorithms को नियोजित करता है, और solution के बाद निकाली गई quantity जैसे stress के strain को calculate किया जाता है, post-processing में FEA problem के solution से produce होने वाली stress and strain counter को हम देखते हैं, किये गए analysis पर report तयार करने के लिए in plots का use किया जाएगा, सबसे पहले mashing के बारे में बात करते हैं, SOLIDWORKS majorly दो तरह के elements use करता है, एक triangular और दूसरा quadrilateral elements, basically triangle elements में तीन nodes use किये जाते हैं, हमारे पास है एक basic quadrilateral element जिसमें हमारे पास 4 nodes हैं, अब कोई भी model जिस पर हम finite element analysis का use करेंगे, वो intricate shapes और profiles से युक्त होगा, इसका मतलब हम decolorizing करने के बाद भी capture क पाएंगे, model कितना complex है, इस आधार पर आपकी mesh को refine करने की ज़रूरत है, कोई भी simulation को करने के बाद, result की accuracy को check करने के लिए हम grid dependency test perform करते हैं, जिसमें हम उसी simulation को mashup refine करने के बाद, दोबारा एक point तक run करते हैं, जहां mesh को इतना refine किया जाता है, कि result change नहीं होते, चाहे हम mesh को आ एच refinement कहा जाता है, और दूसरे को p refinement कहा जाता है, h refinement में हम अधिक element को model में शामिल करके mesh को refine करते हैं, वैसे ही p method में हम elements के number same रखते हैं, लेकिन हम उस elements के order को बढ़ाते हैं, जिसका use हम model में करेंगे, h method में क्योंकि हम elements के number बढ़ाते हैं, इसलिए हम हर elements की characteristics length को decrease करते हैं, p method में elements की characteristics length same रहती हैं, जबकि element में include shape function की complexity को बढ़ाते हैं, यहाँ example देखें कि कैसे h refine और p refine दिखना चाहिए, figure number one में हमारे पास original mesh है, हमारे पास rectangular geometry है, जो discretize है, second हमारे पास h refinement है, और third p refinement, यहाँ mesh six elements consist करता है, जब यह h refined होता है, तो आप देख सकते हैं कि elements number four के factor से बढ़ गई है, और इस factor को define भी कर सकते हैं, इसलिए आप उन elements के number को control कर सकते हैं, जिन्हें आप include करना चाहते हैं, आप देख सकते हैं कि हमने h refinement mesh का use करके element के number बढ़ा कर mesh को refine कर दिया है, at last p refinement में भले ही element के number equal रहें, हमने उपयोग किये जा रहे elements की degree को बढ़ानी के लिए midship nodes introduce किये हैं, accurate result पानी के लिए हम higher order का use करते हुए end करते हैं, इस प्रकार हमने अपने mesh में प्रियोप्त element के order को बढ़ाने के लिए p refinement का use किया है, अब आगे बढ़ते हैं, FEA में हम अपनी requirement के हिसाब से different analysis यूज़ करके problem solve करने वाली competition को reduce करने की कोशिश करते हैं, हमारी requirement के according, FEA में 1D, 2D और 3D analysis कंसिस्ट हैं, पहले 1D analysis से शुरू करते हैं, अगर आपके पास FEA analysis एक ऐसा model है, जिसकी एक dimension बाकी dimensions से थोड़ी बढ़ी हैं, तब हम 1D analysis के साथ जाते हैं, तो FEA analysis में जो model आप use करने जा रहे हैं, उसकी एक dimension बाकी dimensions से बढ़ी हैं, इसलिए हम required results पाने के लिए 1D analysis करेंगे, चलिए example के लिए एक लंबे beam को consider करते हैं, और मैं bending की वज़ा से हुए deformation को देखना चाहता हूँ, क्योंकि beam काफी लंबी है, required results पाने के लिए 1D analysis काफी हो हैं, अब 2D elements जो की shell elements को refer करते हैं, और ये shell elements actually modi के साथ provided होते हैं, और model represent करते हैं, तो ये predominantly तब use किये जाते हैं, जब हमारे पास model में पतली sheet और shell structures होते हैं, और इस तरह हम part पर पढ़ने वाले bending stress को सटीकता से निकाल सकते हैं, इस तरह elements use करके हम के comparison में कम computation करके भी accurate results पा सकते हैं.

अब finally 3D. एक बार जब आप 1D और 2D के सभी जरूरी results पा लेते हैं, लेकिन फिर भी आप पूरे model में produce होने वाले stress को समझना चाहते हैं, तब आप 3D analysis की तरफ बढ़ते हैं, जो की computationally ज्यादा भारी होता है. हमारे पास यहाँ model को दर्शानी के लिए solid है, अंत में simulation के बाद हम simulation से हमारे निश्चकर्शों को पता लगाने के लिए बहुत से stress and strain plots को देखते हैं, हम अगले वीडियो में beam problem पर 1D, 2D और 3D simulation प्रदरेशन करने का तरीका देखेंगे, चलिए SOLIDWORKS के पूरा होने वाले module पर जैसा की नाम specify करता है, पहले हम मानते हैं कि force टाइम से independent है, और ये हमें stress, strain को एक point surface और thermal load के रूप में लागू load के लिए produce displacement की calculation करने में मदद करता है, हमारा mole root से static module के बारे में है अब fatigue में जब आपके पास एक model है, जिसे बार-बार load होने पर act करता है, तो आप किस तरह के load के कारण material की failure को अध्यन करना चाते हैं, तो हम इस fatigue module का use करेंगे fatigue analysis से अब cyclic loads के तहट अपने model के behave को समझने में सक्षम हो जाएंगे Frequency model तब तक सक्षम होगा जब तक कि एक module जो की force के अधीन हो और एक body जो एक certain frequency करती हो हम जानते हैं कि सभी की एक natural frequency होती है और इस natural frequency को find out करनी के लिए हम इस frequency module का use करते हैं हम जानते हैं कि हम इस तरह के analysis इस model से connected different shapes को देख सकते हैं तो buckling model में material strength की वज़ा से हुए failure के अलाबा beam की तरह हम lengthy member axle in instability के वज़ा से भी fail हो सकता है इस तरह के analysis को buckling model का use करके perform करा सकते हैं और SOLIDWORKS multiplication factor के calculation के द्वारा axle load के अधीन model के failure के कलपना करने में help करता है यहां SOLIDWORKS buckling factor को plot करता है जो हमें buckling के कारण failure को predict करने में help करेगा thermal module conduction, convention, radiation जैसे loads के कारण body में temperature flux steady को करने में section होगा अगे optimization में optimum design प्राप्त करने के लिए every finite element analysis perform करता है यहां हमारे लिए optimum design कम से कम द्रव्यमान या कम से कम तनाव के साथ होगा हमारे requirement के अधार पर हम solver को dimensions के different values के बीच पुर्ना व्रत्ती करने के लिए कह सकते है और इसमें एक optimum design parameter ला सकते है यह model optimization perform करने के लिए बहुत उपयोगी होगा अब हमारे पास pressure vessel design है SOLIDWORKS के पास एक special module है जो की pressure vessel design के लिए customized है और यह model help करता है typical analysis में जो की pressure vessel design करते वक्त किये जाते हैं अब vibration part यहां loads को power spectral density function के रूप में specified किया जाता है चिंता ना करें अगर आप इस term से unfamiliar हैं तो आपको एक उचित material provide किया जाएगा जो आपको इसे समझने में मदद करेगा अभी के लिए आप इतना समझ लीजिए कि यह आपके model में मौजूद vibration का analysis करने में help करेगा और उस stress को देखेगा जो एक लंबे समय में विक्सित होते हैं finally हमारे पास drop test है जैसा कि नाम से पता चलता है अगर आप किसी model पर stress strain को देखना चाहते हैं जब यह drop होता है तो हम इस model के लिए जाते हैं यहां solver stress strain counters को plot करने के लिए time impact पर explicit time integration का use करता है initial velocity प्रदान करके और fillets में gravity को जोड़ कर simulation को एक इकरत करते हैं और यह solver में included करते हैं मुझे आशा है कि इस lecture में आपको इसके बारे में संक्षिप्त जानकारी मिल गई होगी कि FEA क्या है और कैसे SOLIDWORKS में हमें अलग-अलग तरह के analysis module perform करने में help करने के लिए अलग-अलग module है इस video को देखने के लिए आपका बहुत-बहुत धन्यवाद अब मैं आपको अगले वीडियो में मिलता हूँ अब मैं मैं आपको तरह करने मिलता हूँ

Want the rest of CAE Simulation using SolidWorks?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full CAE Simulation using SolidWorks course

The remaining 6 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full CAE Simulation using SolidWorks course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.