Wiring harness design in CATIA V5 - 3D modeling Week 4 Challenge

Assembly and  GD&T to the butterfly valve assembly drawing.   ll ddI have provoded the link below: https://drive.google.com/file/d/1IApsh99N9LDZs3neK0_nAC0-dNPY6CYP/view?usp=sharing    

Report :   NOTE:I HAVE a problem with the file SUBMISSION AS IT IS EXCEEDIDE 20 MB SO I ONLY ATTACHED THE 'STEP' FILE AND I HAVE GIVEN THE LINKS BELOW OF DRIVE OF THE PROJECT AND STEP FILES. THANK YOU   https://drive.google.com/file/d/15_QZWazh4ZzNbpIgBFZolNPkVU60iX12/view?usp=sharing STEP file:   https://drive.google.com/file/d/1sgheB6Jt0dUGcgk9y_FkMTy-obVhn-1e/view?usp=sharing…

REPORT ON BACKDOOR NOTE:I HAVE PROVIDED THE LINK BELOW OF THE FILE ,IN CASE IF ANY U FIND ANY TROUBLE WITH THE ATTACHED FILE U CAN GRADE MY CHALLANGE THROUGH THIS DRIVE LINK, THANK YOU   PROJECT FILE (ALL FILES) https://drive.google.com/file/d/1qtJQWiymOh8UoskhB_ufj8fiCplWZlkp/view?usp=sharing   FLATTENING AND…

Report  on the week 7 challenge .     Aim is Flattening  the harness assembly completed in “ week 4 challenge”. NOTE:I HAVE PROVIDED THE LINK BELOW OF THE FILE ,IN CASE IF ANY U FIND ANY TROUBLE WITH THE ATTACHED FILE U CAN GRADE MY CHALLANGE THROUGH THIS DRIVE LINK, THANK YOU   Challenge…

REPORT on CAR SIDE DOOR WIRE HARNESS   NOTE:I HAVE PROVIDED THE LINK BELOW TO THE FILE,IN CASE IF ANY U FIND ANY TROUBLE WITH THE ATTACHED FILE U CAN GRADE MY CHALLENGE THROUGH THIS DRIVE LINK, THANK YOU   Project file  https://drive.google.com/file/d/1DeVg0lZWVQVCx5V-K_lNAf8RFPB6bSlF/view?usp=sharing  …

Report for the week 5&6 challenge .   The given layout is given below. The connectors are downloaded from te.com NOTE: I HAVE PROVIDED THE LINK BELOW TO THE FILE, IN CASE IF ANY U FIND ANY TROUBLE WITH THE ATTACHED FILE U CAN GRADE MY CHALLENGE THROUGH THIS DRIVE LINK, THANK YOU   https://drive.google.com/file/d/1hJrdqbSgp97ihLtJc5yiL232GzLmRK-5/view?usp=sharing…

REPORT ON CHALLANGE WEEK 4 NOTE:I HAVE PROVIDED THE LINK BELOW OF THE FILE ,IN CASE IF ANY U FIND ANY TROUBLE WITH THE ATTACHED FILE U CAN GRADE MY CHALLANGE THROUGH THIS DRIVE LINK, THANK YOU     https://drive.google.com/file/d/1yMBbALM32rnUJN-Ig9ENAAPpQhum1J4W/view?usp=sharing    protective covering…

Car Roof Design and Analysis Documentation   NOTE: IF YOU HAVE ANY PROBLEM WITH THE FILES ATTECHED(DUE TO SIZE CONSTRAINS), PLEASE CONSIDER THE GOOGLE DRIVE LINK.     https://drive.google.com/file/d/11CvGFIoo5jH6PKG6XHfB7Notl593-7gR/view?usp=sharing   STP   https://drive.google.com/file/d/1KW0RPMOTNBNgWyVIzRaUkAD2kNSk6_m1/view?usp=sharing…

REPORT on Automotive Fender The automotive fender stands as a pivotal element, seamlessly blending functionality with aesthetics in vehicle design. This document meticulously explores the intricacies of fender design, encompassing its primary roles, challenges, and the diverse array of types and mounting options available.…

   REPORT  P-CLAMP,WITH THE SUPPORT DEFINITION GIVEN ,AND POINTS AND PLANES P-clamps lock cables and hoses in place and help ensure that machinery, vehicles and equipment keep running. They bracket wires, cables or hoses together mechanically and are fastened securely to an anchor point – usually with a screw or a bolt.…

the project link is below   https://drive.google.com/file/d/1PUOpMRPvF8AqMjigwUqcD9yzSmySKKuz/view?usp=sharing     1) Objective: The aim of this project is to construct a well defined hood assembly by modeling the different parts needed in creation of our hood assembly that parts are hood inner & outer panel, hinge assembly,…

IAM UNABLE TO ATTACH THE FILE DUE TO IT SIZE IS ABOVE THE ALLOWED SIZE SO I PROVIDED THE GOOGLE DRIVE LINK BELOW: https://drive.google.com/file/d/19VuXjQh96tjma8D1SDv7r0DcCiz_lrY8/view?usp=drive_link   Report: Section Modulus calculation and optimization   Section modulus is a geometric property that measures the strength…

        The aim is to Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip.   Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) Tyco 174357-2 (https://www.te.com/usa-en/product-2-174357-2.html?source=header-match)…

AIM: The objective of this project is to develop an innovative interior door part using inputs from Class A surface in CATIA V5. The focus will be on adhering to the design principles commonly applied in Tier 1 and OEM industries. By incorporating these guidelines, we aim to create a unique and functional door interior…

    DRAFT ANALYSIS OF CLASS A DRAFT 2.9 DEGREES HERE FOR CLASS A THE MINIMUM IS 2.2 REMAINING DRAFT IS 3 DEGREES   CLASS B ANALYSIS Hear the entire B surfaces clearing except the portion which is in the image the least draft angle is 2.6 DEGREES The maximum draft angle is 3 degrees    Analysis…

   AIM:TO Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. And to Create the Heat Stakes…

AIM: TO Create the Screw boss for the Drill Handle considering the design rules mentioned. General Guidelines for Bosses:   Draft - 0.5 degrees on the walls of boss   Thickness - Typically 40%* of the nominal wall at the base.   Height to Diameter Ratio - 3:1   Radii -…

AIM: To create Dog House for the Door Trim considering the design rules mentioned in the video. Consider the thickness of the part to be 2.5 mm. points to be considered:  Doghouse wall thickness at the intersection of the part wall ( C ) should be 40% or less than the main wall stock ( T ).  The…

  An explanation on the way of creating the tooling axis, particularly the Bisecting method TAKE BOUNDRY FROM CLASS A AT THE GIVEN DIRECTION CREATE A POINT ON THE CURVE CREATE A LINE, TAKING POINT AS A REFERENCE ALONG X DIRECTION       BELOW ARE THE Screenshots of the Draft analysis report for…

BELOW IS  the explanation given on the way of creating the tooling axis, particularly the Bisecting method.  step 1, extract the surface which is taken as a reference   STEP 2, create the point   and a axis system on the surface STEP 3, intersect the class A with the plane and using positioned…

 BELOW ARE THE Screenshots of the Draft analysis report for  the given Class-A surface   DRAFT ANGLES OF CLASS A SURFACE    BELOW ARE THE screenshots of the Draft analysis report for the final plastic component   Image of the complete Draft analysis  of class A With Colour scale varient…