Wiring harness design in CATIA V5 - 3D modeling Week 4 Challenge

To define the wire harness routing:

As many of the electrical wire harness components as possible are the first placed into the wire harness assembly before wire harness routing are created .

As this stops the using the reference points from other parts for routing which in reality does not exists.

its the best parctise clips are already inseted into the geometrical bundle

to route the many create the simple wire harness bundle segments

creating the harness multiple branches

GEOMETRICAL BUNDLE ASSEMBLY SHOULD BE COMPLETED

ALL THE COMPONENTS SHOULD BE PLACED AT DESIRED LOCATIONS

ALL TYPE OF ELECTRICAL CONNECTORS ARE DEFINED

BACKGROUND GEOMETRY DATA IS AVAILABLE AND ASSEMBLY IN GEOMETRICAL BUNDLE CONTEXT ASSEMBLY

ensure that you have your geometrical bundle highlighted

select the create multi branchable document icon

in the bench definition box input all the required parameters

ensure that the bend radius ratio is set to 1.4 or more than that

check that buid mode is set to slack

INPUT THE BUNDLE DIAMETER

CHECK ON THE BEND RATIO AND SET TO1.4

SET THE MODE TO SLACK

SELECT THE ROUTE DEFINITION BUTTON

SELECT THE OBJECTS TO ROUTE