Wiring harness design in CATIA V5 - 3D modeling Week 2 Challenge

All the CAD files have been attached with this submission and the report has been generated using MS Word which has also been attached.

All the required files has been attached and the report is prepared in MS Word which has also been attached. 

The Wiring Harness for the given circuit is  The flattening is done using the Wiring Harness Flattening workbench  Since the diagram doesnt contain any slack, The wiring harness and the flattened harness look pretty much alike  The wiring harness is finally drafted using the drawing Workbench Here the wiring…

Harness A Harness B     Checking for bundle connectivity  The above image shows that the bundle is completely connected with each other.    Checking for bundle warning The above image shows no bundle warning.   Creating Annotations    Generating CATPart  The above image shows…

The wiring harness for the given diagram has been drawn successfully.  The connectors are first imported and the bundle connection points are defined priorly.  The connectors are then added from the catalogue and is placed accordingly as per the diagram using translation and rotation command from mechanical assembly…

The answers have been submitted in the form of a Word Document

The report is submitted as a Word document and the necessary CATpart files are attached. 

The matlab Script file and the simulink model has been attached below.  The results of the simulation and the project report has been attached in the word document which also submitted. 

The Vehicle model is built using the given data and the pictures and the approriate simulink model is completed.  The Project1_InitFile.m is opened to load all the vehicle model parameters and data and the simulink model is initialized. Additional To Workspace blocks have been added appropriately to directly send the simulink…

In this model a double acting actuator is modeled using simscape multibody which is hydraulically operated. The hydraulic part of the model is built using simscape. A spool Valve is used to control the direction of the actuator. The input is based on a pulse generator and .The output is verified in the mechanics explorer…

1) The major elements in the given diagram are  Battery, Generator, Starter Motor, Ignition Coil, Distributor, Circuit Breaker, Horn, Light 2) Battery Battery is the primary electrical source of the automobile. It powers all the electrical appliances like the horn, lights and even the ignition system of the vehicle …

1) The major elements in the given diagram are  Battery, Generator, Starter Motor, Ignition Coil, Distributor, Circuit Breaker, Horn, Light 2) Battery Battery is the primary electrical source of the automobile. It powers all the electrical appliances like the horn, lights and even the ignition system of the vehicle  Generator …

In this project a simple PID controller is designed to control the speed of a DC motor. The Proportional constant and the Derivative constants were derived by the pole placement method to be 39.4784 and 5.2732 respectively . But has been tuned to 15 and 7.5 for better performance of the controller. The Integral Constant…

This program interpolates the given data to the given specific range and displays the given data, interpolated data and compares the given data with the interpolated data in a single subplot. The interpolated data then is saved in a notepad file called random.txt. The matlab code is given below volt=xlsread('VI.xlsx','A2:A25');cur=xlsread('VI.xlsx','B2:B25');newvolt=[-17.3:0.1:0.9];interpol=interp1(volt,cur,newvolt,'spline');subplot(3,1,1);plot(volt,cur,'r');grid;title('Given…