Week 9 - Project 1 - Door Trim Lower with Engineering Features

AIM: one-pager about Under-Body Coating and its purpose, its types in detail, and its pros and cons. UNDER BODY COATING:  Underbody coating is a thick cladding (typically made of rubber) that is placed uniformly to the car’s underside. When the automobile is fresh off the lot and spotless, it…

Objective:-   Benchmarking atleast 4 cars in the range of 8 lakhs to 10 lakhs, so that Mr. D.S. Pughazhyendhii and his family can travel 500kms every month to banglore to chennai and also he could commute in the heavy traffic of banglore for daily office going. Detailed report of Benchmarking with images.…

AIM: To Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 2.5…

  Aim: Create the Bumper Plastic component through the given Class-A surface. and create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  The thickness of the component is 3 mm.   Design : Insert the class…

AIM: To Create the Dog House for the Door Trim considering the design rules mentioned in the video. Consider the thickness of the part to be 2.5 mm. "C" is where the doghouse contacts the backside of the surface    Doghouse wall thickness at the intersection of the part wall ( C ) should be…

                                          REPORT :   AIM : To Create the Screw boss for the Drill Handle considering the design rules mentioned in the video. DRAFT ANALYISIS : The Body…

                                               REPORT :   AIM : To Create the Switch Bezel Plastic component through the given Class-A surface . DRAFT ANALYISIS : After the creation of close body click the draft analysis option and in that click the compass option and place the axis in the axis tool created and lock the…

                                              REPORT :   AIM : To Create the Coin Holder Plastic component through the given Class-A surface . DRAFT ANALYISIS : After the creation…

                                                                     REPORT :   AIM : To Create the Switch Bezel Plastic…

                                                                        REPORT :   AIM : To Create the Base Bracket Plastic component…

                                                                        PROGRAM TO SOLVE THE ODE           …

                                                                 Program in Matlab to simulate the forward kinematics of a 2R Robotic Armclear all close…