Week 6 - Creating connection for Rear door
Week 6
AIM:
This week, the connections for the front door by using different 1D elements are taught in detail.
Now for the given Rear door FE model, Create and Apply different PIDs for different components. By using the same technique and the elements as shown in the video, Perform suitable connections. (No thickness need to be assigned to FE as intention is just to deploy connections)
(Refer “Model Requirements” in “Grading Policy” to know what to be done in the model)
DESCRIPTION AND PROCEDURE:
1. open the ANSA software. load the side door model in the ansa.
2. After loading check the model for their property wheather the property are asign or not if the property id is not asgin in the component then go to SET PID command to set the property and to set the new pid go to faces option and specify the pid for the component and asign the pids as per requirment.
3. After asigning different different pids for the door component then go to NASTRAN deck to specify the RBI2 link between the hinges the joint where hinge is attach to the car body their specify the degree of freedom as 12345. so that it can move along z axis.
4. After specifing the RBI 2 link in the FE then go to window to dpecify the RBI3 CBUSH RBI3 link between window and frame.
5. for specifing the cbush we need to create the curve. for craeting curve go to perimeter in mesh deck and select the feat2curve to create the cureve after creating the curve go to transform option to specify the distance between cbush element and for that btm cuve of the window frame copy at the distance 10.
6. after coping the curve go to assembly module and go to converter option and create the spot line to create the connection.
7. after creating spot line then go to assembly again select the connection command and select the spot line and press middle mouse button and create the cbush. after pressing middle mouse button new window will pop up their we have to specify the P1 and P2 to create the connection.
8. after selecting P1 and P2 then specify the spacing(s) as 10 and press enter. in right side select the RBI# CBUSH RBI3 and select the keep all the specify and press apply and realize the connection. to see clearlly go to the quality parameters and specify the all details in presentation tab.
9. to specify the bolt connection in side door, first create the COG POINT for the hole you want to create.
10. after creating the COG point go to converter option and select the 3d point and select the bolt. after that go to connection and create the bolt connection. as shown in figures.
11. for spot weld, we need to point first, after creating the point go to converter option and select the point and convert as the spot weld and after creating spot then go to connection and select the spot weld and press the middle mouse button and in side specify the RBI3 hexa RBI3. and select the pids and press apply and realize the connection.
RESULT:
NOTE:
i am not able to upload a pics in this challenge some error is showing i have attached the all the pics below. and i also have atteched the error image as error its name. please let me know about the error what is that error.