Week - 2 - Explicit and Implicit Analysis

"Revolutionizing the Automotive Industry: A Comprehensive Study of Tesla Electric Cars" This case study examines the adoption and performance of Tesla electric cars in the global automotive market. It aims to assess the impact of Tesla's innovations on the industry and its long-term sustainability.

OBJECTIVE: Mesh the Given component with the Size of 5 Units. Create 1D elements on the following component with given cross-section and DOF, a. Rod element:- Translational DOF should be Constrained with RBE2 link Cross-Section: BOX- Dimension a= 12 mm                  …

To determine the units of a physical quantity, we need to express it as a combination of fundamental units (mass, length, time). Using the given values, we can express different units in terms of these fundamental units.1. SI (International System of Units): MASS: 1 kg LENGTH: 1 m TIME: 1 s FORCE: 1 N STRESS: 1 Pa ENERGY:…

                                        given:  f(u) =  F(u) = u3+9u2+4u      Explicit Analysis   To differentiate the function F(u) = u^3 + 9u^2 + 4u with respect to u,  dF(u)/du…

given cad model: Midsurface:   Quality: ribs: final cad model:  

OBJECTIVE: For the given Rear view mirror component, to check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criterias followed by tetra volume mesh   . GIVEN CRITERIA : S.No  Quality Criteria  Value  1 Target/Average length   1 2 Minimum Length …

OBJECTIVE: To generate tetramesh on the given cad model with respect to the given quality criteria. GIVEN CAD MODEL:   CASE1  CASE2  CASE3 PROCEDURE: case1: Create a Tetramesh for Housing component by  2D to 3D Conversion. import the given housce model and do the geometry clean up . Delete…

OBJECTIVE: To take the mid surface for all the  given components after checking the geometrical errors and mesh the mid surface with the given element Quality criteria. GIVEN: The quality criteria for 2D elements. CAD MODEL:   PROCEDURE: Import the downloaded model on the graphic area. File type is in IGES fromat…

 OBJECTIVE: To mesh the given  Rear Wheel Holder  component with the above criteria. GIVEN: The quality criteria for 2D elements. CAD MODEL: PROCEDURE: Import the downloaded model on the graphic area. File type is in IGES fromat .go to>Import solver>Import geometry>IGES from option >Import. Delete…

OBJECTIVE: To perform mesh on the given suspension model . To follow all the given quality and mesh parameters . Also use Appropriate connections to connect the component and perform symmetry. GIVEN :  Note: Use Volume mesh for Tyre and Rim with below Quality criteria. (Use Tria Element) Use mid surface only when the thickness…

OBJECTIVE: To check for the geometrical errors and take the mid surface for the given Plastic Bottle Cap model . GIVEN :  Element Quality criteria for 2D mesh . CAD MODEL: PROCEDURE: Download the model and import it on GUI of ANSA software. Give cons resolution to the given plastic component mesh deck>length>perimeter.…

CAD MODEL:  2d mesh.    3d mesh .  no off element.   FINAL MODEL :   TIME TAKEN : self evaluation : 3hrs 45 mins

OBJECTIVE: To take the mid surface for all the  given components after checking the geometrical errors and mesh the mid surface with the given element Quality criteria. GIVEN: The quality criteria for 2D elements. CAD MODEL:                 PROCEDURE: Import the model from…

OBJECTIVE: Creating connections to the given Rear door FE model, Create and Apply different PIDs for different components. FE MODEL: PROCEDURE: Before starting the connections we create different property card for the given FE model .                          …

OBJECTIVE:   1) Practice all the Morphing techniques on Model-1.  2) Perform morphing for the Model-2 and Increase the Height of the Dog houses and Ribs.  CAD MODEL : MODEL 1:  MODEL 2: PROCEDURE: Download the given cad model for both case and open in GUI of ANSA software. CASE 1 : MODEL 1 Once…