Underbody Coating

Benchmarking Benchmarking is the process of comparing the performance of a company's products, services, or processes to those of another company that is considered to be the best in the industry, or best in class. Benchmarking is used to identify internal opportunities for improvement. You can implement changes that will…

SECTION MODULUS OF THE HOOD Objective: To find the section modulus of the hood and optimisation to improve the overall section modulus. Section Modulus: The section modulus (S) is geometric property of the cross section used for designing beams and flexural members. It does not represent anything physically. Formula of…

OBJECTIVE To create the BIW of a Fender utilising the fender skin data as input data, and then attach mountings to the fender to connect it to the surrounding BIW bodies. THEORY The part of an automobile, motorcycle, or other vehicle body that frames a wheel well is referred to as a fender in American English (the fender…

Wheel Arch is a section of the Fender in a vehicle that shelters the car's wheel and has a curvature to it. The wheel arch is designed in such a way that the wheel is inside the fender as well as the wheel arch to prevent chipping of the fender and also to protect the pedestrian. Chipping occurs when sand, mud, rocks,…

  Objective: We will design the hood inner panel using NX CAD in this project, which will help us become familiar with the NX CAD features and tools as well as the design parameters and technical abilities required to create the hood. Introduction: Here, we'll learn about and create the concept of a front-mounted…

Automotive Underbody Coatings The underside of vehicles acts as a barrier between the vehicle's metal components and the outside environment. Due to harsh environmental conditions, the underbody of vehicles is susceptible to damage. Coatings are applied to the underside of vehicles to protect them from things like corrosion,…

Benchmarking Benchmarking is the process of comparing the performance of a company's products, services, or processes to those of another company that is considered to be the best in the industry, or best in class. Benchmarking is used to identify internal opportunities for improvement. You can implement changes that will…

  AIM - To create the Door trim panel's CAD model considering the inputs given to me following the design rules and OEM standards.ABSTRACT - The project is about explaining the stages and techniques taken when designing a car's Door Trim Pancl in CATIA V5. I was able to generate the tooling axis, class B surface,…

AIM:To develop two assemblies based on the information presented in the course videos. You will be given 2D schematics of the components and will be required to build individual part files before creating a complete assembly of those part files in the assembly workbench.After you've completed the assembly, use the drafting…

AIM:The goal of the project is to use CATIA V5 software to generate a solid body of the B pillar from the input provided as the class A surface and connect attachment features for fixing the component at the proper position with the main component. INTRODUCTION:The B pillar is a component found between the front and rear…

AIM: To build the boss and Dog House for the Centre console coin holder while keeping the design rules in mind. THEORY: We had already made a coin holder and added ribs because ribs are vital in the design of plastic parts since they allow us to make a component rigid without making it excessively thick. In this task,…

Aim:- The goal is to construct a door applique design from the given class A surface and engineering features to fit the component in the main surface. Introduction:-Engineering features are extensions on plastic components such as ribs, screw bosses, heat stakes, locaters, and so on that help secure the plastic component…

Objective - Objective of this challenge is to Creation of RIB of Coin Holder and add thickness to it using CATIA Software. Tooling axis - The tooling axis is defined as the direction in which the mold opens or core and cavity opens and closes. The selection of the correct tooling axis is important to ensure the component…

Objective The main objective of this project is to create the core & cavity design and the draft analysis for the Switch Bezel using Catia V5. Introduction: The draught analysis will indicate the body's vital angles, and it's critical to keep a favourable draught angle. A draught analysis is performed on a part to…

  AIM: Creating the coin holder plastic component through the A-class surface and add thickness to it Objective: Creating the B and C surface Creating the tooling axis Performing the draft analysis on both A surface and final plastic components. Take the Thickness of the component to be 2.5 mm Introduction: The input…

Objectives To make the Switch Bezel Plastic component using the Class-A surface provided. To begin, design a tooling axis for the supplied Class-A Surface that meets the draft angle requirements, and then do a Draft analysis on the model. The Switch Bezel Plastic component's class B and C surfaces were also created. Assume…

Objective: For the supplied Base bracket model, create a B-class surface, a C-class surface, and a tooling axis. To publish the tooling axis, the class-A surface, the B-class surface, and the C-class surface. Conducting a draught analysis to ensure that the Tooling axis was created correctly. Introduction: CATIA V5 Dassault…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS FOR FAN COVER Objective: The main goal of this project is to use Catia V5 to develop the tooling axis and draft analysis for the fan cover. Introduction: The tooling axis is critical for the component to be created; if that tooling axis is used as a reference, the item may be…

Aim: To write a technical report on the simulation of a BAJA All-Terrain Vehicle (ATV) under various situations. Objectives: Perform a system-level simulation of an all-terrain vehicle and write a technical report that explains the model properties and provides feedback on the results. ALL TERRAIN VEHICLE: An all-terrain…

Challenge 4 AIM: Use stateflow to implement the control logic of a washing machine by specifying certain conditions based on the power and water inputs. According to this input machine, it runs and generates output using lamp light. Create the stateflow for gear shift, varying the speed as input, and displaying the result…

Make a Simulink model of Doorbell using solenoid block with the following details: In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation where the switch is closed for 2…