Underbody Coating
1. Write a one-pager about Under-Body Coating and its purpose, its types in detail, and its pros and cons.
ANSWER
UNDER BODY COATING
- Under-Body coating are used to protect or prevent from the moisture which makes rust on the Car.
- It helps from the poor roads condition, stones damage the parts of the car are protected.
- This underbody coating helps in protection from dust and moisture.
STEPS INVOVED IN UNDER BODY COATING
- Pre-treatment
- Electro Deposition
- rust proof material
- primer
- topcoat
PRE-TREATMENT
- The first step in BiW for subsequent coating is the pre-treatment process
- Pre-treatment consists of cleaning the body surface to remove remaining oils from the stamping process
- And welding residues thirough three primary liquid dip processes of dlegreasing, conditioning and phosphating
ELECTRO DEPOSITION
- Electo Deposition are done to prevent the corrosion
- ED process is a non rust proof
- ED is the main process of aviod rust.
RUST PROOF MATERIAL
- The third step is sealing PVC in underbody coating
- The sealant is applied around and inside the doors, hood, trunk and front dash
- And onto the exterior and interior of metal joints and outer area of the back wheel well.
PRIMER
- The fourth coating step is the primer coating in surface
- primer in solvent or spray or power coating.
- Primer is used to improve the paint enhance
TOPCOAT
- The final step in the body coating process is to apply the.topcoat
- It consists of two layers the basecoat and clear coat
- Base coat is the primary colour
-
Clear coat is the protective coating
DIFFERENT TYPES OF UNDERBODY COATING
Rubberizied under body coating
- These coatings are easy to apply as well as protection from dust, moisture and dents.
- It provide soft finish
Wax under body coating
- Wax or paraffin-based undercoating is the cheapest
- It is quickest option available in the market
- But these coatings last only for one yecar of duration
Asphalt based under body coating
- It is used for light commercial vehicle.
- It is used for light commercial vehicle.
Polyrethane under body coating
- This coating is quick and easy to apply
- This type of undercoating always requires surface preparations before apply
UNDER BODY COATING PROS
- Reduces noise
- Extend the life of the vehicle
- Covers small damages
UNDER BODY COATING CONS
- Its not effective on cars with corrosion
- Doesn't work so well on old car
- it's useless on new cars
- Your vechicle's warrenty might be voided
- its makes your vechicle heavier
- it can be damaged
- it can be expensive