AIM: To model and analyse G+25 multistory building using ETABS 2020 and to check the model and parameters as per IS 1893(1)-2016. INTRODUCTION: Modelling and analysis of G+25 multistory building using ETABS 2020 is being explained with step-by-step procedures PROCEDURES:  Open ETABS 2020 software Open New Model Project…

Aim : To analysis a G+7 building with th same floor plan through out the levels. The structural model must comply with provisions of IS 1893 and IS 13920. To Run a modal response spectrum analysis and check analysis results of the etabs model for inter-storey drift requirements, vertical & planar irregularities,…

AIM:         TO MODEL AND ANALYZE MULTIPLE BUILDINGS WITH DIFFERENT FLOOR LEVELS AND DESIGN PARAMETERS USING ETABS SOFTWARE AND COMPARE THE RESULTS TO UNDERSTAND THEIR OVERALL SEISMIC BEHAVIOUR. INTRODUCTION:              The structural configuration of the building…

QUESTION: In this project, participants will get to experience the entire design process from modelling, analysis, design and preparation of construction drawings. The architectural drawings of a G+3 RCC building is provided. The following information on the building is to be used: Location – Guwahati, Assam Function…

ANS- AIM:- DESIGN AND ANALYSIS A HOTEL BUILDING IN GUWAHATI , ASSAM USING ETABS AND SAFE. PROSEDURE:-  open ETABS and set the grid and storey data as per given in attachment. now edit storey . now go to define>materials. add M25, HYSD415, HYSD500. Now go to define>add section . add column of 400x600 and…

Aim: to model and analyse a 25 storey building with given specifications and to cross check the parameters as per IS 1893 provisions. Procedure: Open the ETABS software.Click the file menu and choose to create a new model option.After choosing a new model a dialogue box will appear as model intialization.Choose the built-in…