Radar Mast & Final Assembly of Yacht
figure.-camera set-up view. figure-camera set-up view
PROJECT REPORT
TITLE- SUNSEEKER PREDATOR YACHT
ABSTRACT-
Sunseeker yacht is mostly used for pleasure, cruising or racing purpose. A yacht is different from Boat because it has upper superstructure which is used as shelter during overnight. Such pleasure yacht is likely to be at least 33 feet long in length.
A yacht is also judged for its having Very good Aesthetic look. Yacht can be used as Commercial purpose, private purpose also.
Racing yacht are designed to emphasize performance over comfort. Sometime yacht has helicopter on board. Depending on size yacht has two cabins, a main salon and a forward stateroom. Typically, salon includes dining area which may be folding manner or built-in table.
Cruising yachts may be designed for near seashore use or for passage making. They me also used as racing yacht but they are designed and built for comfort purpose. Quality considered in cruising yachts include; performance, comfort in way, ease of handling, stability, living comfort, durability.
Yachts may have different categories like, small yacht, near-shore yachts, off-shore yachts.
The best yacht considered on the basis of its design, aesthetic, ergonomics, engine performance, style, Hulls displacements.
OBJECTIVE
understand and application of assembly relation, mates during In Sunseeker predator yacht assembly Sketching and creating 3D model of respective parts for Sunseeker predator yacht. To. Also apply surfacing tool to creation of hull Superstructure.
More important to understand and use of photo view 360, solid work visualization tool for purpose of accurate realistic view of In Sunseeker predator yacht.
INTRODUCTION
In Sunseeker predator yacht uses many individual components and they assembled together and made a pleasure yacht.
In this project, we firstly made design in the software like solid work. Mainly for design purpose we must know about software features tool that used in it.
Yacht is fully containing surfacing feature which acquire 90 % part of design and remaining solid feature.
In sunseeker yacht containing superstructure which is also require surfacing feature knowledge.
The software we used for design is solid work. Solid work gives us very easy and time-consuming feature so we can use it and apply in our design.
Most time we use Blue-prints for such big yacht. Because it gives us easy modelling, save time also. Blue print set up shows exact views and complex sketches easy way.
The solid work also provides Rendering feature to render our product and gives actual look. By using rendering tool, we can apply various background which gives real scene to our product and we can compare it.
The Assembly tool in solid work also gives easy call to components, mates relation, motion feature also.
Sometime design engineer uses Top-down assembly and Bottom-up assembly.
In sunseeker yacht we use Bottom-Up Assembly for easy way purpose.
DESIGN FLOW-CHART
OVERVIEW OF FEATURE APPLIED
Solid work gives various features to making 3D model from 2D sketches. Tools used into solid work very handy and easy to use at any time. feature allows repairs model at any environment. Some of feature that we used in the American chopper listed below.
- Extruded Boss/Surface extrude
- Extruded Cut
- Shell
- Revolve Boss
- Fillet
- Camphor
- Swept Boss/surface Swept
- Loft Boss/surface loft
- Pattern
- Mirror
- Split tool
- Dome
- Appearance
- Composite curve
- Project curve
- Photo view 360
- Rendering
- Visualize
- Surface fill
- Extend surface
- Knit surface
- Offset surface
Surface/ Boss extrude– surface/ Boss extrude feature allows to convert 2D fully defined sketch into 3D appropriate model with variable dimension.
Extrude cut – Extrude cut feature used to cut the unwanted part from model.
Fillet – It help to converts sharp corner into smooth and round surface.
Shell – Shell feature allows to convert solid model into hollow with desired thickness.
Revolve Boss – This feature allows to revolve the 2D sketch into solid round model by selecting reference axis.
Swept Boss – This feature also helps to create solid body by selecting reference curve.
Loft Boss – Loft boss feature used to create solid body of two different sketch.
Pattern – Pattern feature is very useful and easy tool. It helps to create same feature into multiple time.
Mirror – For developing same body mirror tool is used. For mirror we need to select reference plane.
Split Tool – Split tool allow us to cut or divide the 3D model or solid body into two parts with vertical, horizontal and some angle as well.
Dome – dome feature fives us to oval or elliptical, circular shape.
Appearance – Appearance feature allow to applying color and material to 3D model.
Composite curve – This feature helps to combine two different projected curves in single plane.
Projected Curve – In solid work projected curve feature very useful it allows to connect sketches of two different plane into single feature.
Rendering – Rendering is one of the great features where we create real scene of 3D model by applying background.
Visualize – This feature is part of Rendering also in which we make model exact real time model by using various environments effect, background, cameras mode.
Surface Trim tool-this feature used for trimming the unwanted surface .
Split line- This command used for creating partition between surface or face of extruded parts.
Delete face- By usinf it we can delete unnecessary face.this feature comes with option like delete face,delete patch,delete and fill.
Extend Surface-This tool used to extend the existing surfece by user requirements.
Knit surface – It is used to convert all surface boundary into single connected form.by using it we convert surface to solid body.
PARTS TO BE MODELLED
- HULL
- SUPERSTRUCTURE
- RADAR MAST
- RADAR
- FRONT SEAT
- MIDDLE SEAT
- REAR SEAT
- PROPPELLER
- GARAGE DOOR
BLUE-PRINT SET-UP-Most time we use Blue-prints for such big yacht. Because it gives us easy modelling, for time consuming also. Blue print set up shows exact views and complex sketches easy way and with help of it we can create complex curves.
1)FRONT VIEW
2)LHS VIEW
3)RHS VIEW
4)ISOMETRIC VIEW
SUNSEEKER PREDATOR YACHT COMPONENT DETAILED VIEW
1) HULL
The hull is watertight body of yacht or boat. Hull may be fully or partially covered with deck surface. On the top of hull may be superstructure, radar mast, deck-house are available.
In solid work software to create hull we use 90% surfacing features.
THE FEATURES USED IN HULL-
Sketch
Surface extrudes
Project curve
Loft surface
Fill surface
Trim surface
Extent surface
Knit surface
Extruded boss
Shell
Cut extrude
Fillet
Chamfer
Swept
2)SUPERSTRUCTURE
A superstructure is extended construction body which built or rises on existing platform. In ship the portion above deck surface is named as superstructure.
THE FEATURES USED IN SUPERSTRUCTURE-
- Sketch
- Surface Extrude
- Ruled Surface
- Surface Sweep
- Trim Surface
- Knit Surface
- Cut Extrude
- Extrude thin
- Loft surface
- Chamfer
- Fillet
- Mirror
- Dome
3)Radar mast
A radio mast is a tall upright structure that is used to transmit radio or television signals. It is navigation mast supporting to radar unit.
THE FEATURES USED IN RADAR MAST-
- Sketch
- Boss extrudes
- Sweep
- Filet
- Chamfer
- Mirror
4) RADAR
a system for detecting the presence, direction, distance, and speed of aircraft, ships, and other objects, by sending out pulses of radio waves which are reflected off the object back to the source.
THE FEATURES USED IN RADAR –
- Sketch
- Boss extrudes
- Fillet
- Cut extrude
- Sketch pattern
- Mirror
5)FRONT SEAT-
It is things that we can use for seating purpose. In yacht it placed on the front side so it named as front seat.
THE FEATURES USED IN FRONT SEAT –
- Sketch
- Surface Sweep
- Surface Extrudes
- Surface ruled
- Surface offset
- Surface trim
- Surface Knit
- Surface Extend
- Surface Loft
- Extruded boss
- Fillet
6)MIDDLE SEAT-
As like Front seat it is also used for seating purpose but different in shape, size and design. It is placed at middle of superstructure and rear seat.
THE FEATURES USED IN MIDDLE SEAT –
- Sketch
- Extruded boss
- Extruded cut
- Mirror
- Fillet
- Chamfer
7)REAR SEAT-
It is placed at rear deck surface of yacht. It’s having good look and shape.
THE FEATURES USED IN REAR SEAT –
- Sketch
- Surface Sweep
- Surface Extrudes
- Surface Offset
- Surface ruled
- Surface offset
- Surface trim
- Surface Knit
- Surface Extend
- Surface Loft
- Extruded boss
- Cut Extrude
- Sweep
- Revolve
- Mirror
- Fillet
- Chamfer
8)PROPELLER
It consists of a central hub with radiating blades placed and twisted so that each forms part of a helical surface and that is used to propel a ship.
THE FEATURES USED IN PROPELLER –
- Sketch
- Revolve
- Loft base
- Cut Extrude
- Fillet
- Circular Pattern
9)GARAGE DOOR-
A garage door is large door which is closed manually or by using motor. In yacht, it presents at rear end of hull and used for car garage house.
THE FEATURES USED IN GARAGE DOOR –
- Sketch
- Extrude Cut
- Shell
- Fillet
- Mirror
SUNSEEKER PREDATOR YACHT COMPONENT ASSEMBLY-
The Assembly tool in solid work also gives easy call to components, mates relation, motion feature also.
Sometime design engineer uses Top-down assembly and Bottom-up assembly.
In sunseeker yacht we use Bottom-Up Assembly for easy way purpose.
1)TOP-DOWN ASSEMBLY-
In top down, we create all component in a single assembly environment. In those parts are modelled from top to down manner.
2)BOTTOM-UP ASSEMBLY-
In bottom-up, we create assembly components individually and then call it into assembly work area, so that we can assembled part by giving proper mates relation.
1) FRONT VIEW
2) LEFT HAND SIDE VIEW
3) ISOMETRIC VIEW
4) BACK VIEW
BASIC SCENE RENDERING VIEW OF SUNSEEKER PREDATOR YACHT -
1) FRONT VIEW
2) TOP VIEW
3) LEFT HAND SIDE VIEW
4) ISOMETRIC VIEW
5)CAMERA SET-UP VIEW
RENDERING VIEW OF SUNSEEKER PREDATOR YACHT WITH BACKGROUND -
1) FRONT VIEW
2) RIGHT HAND SIDE VIEW
3) BACK VIEW
4) CAMERA SET-UP VIEW
5)ISOMWTRIC VIEW
RENDERING PROSPECTIVE VIEW
-
CONCLUSION-
Solid work is very handy software in which we can create 3D model with time consuming, fast, and easy.Rendering in solid work is very effective which gives realistic view for model.
About SUNSEEKER PREDATOR YACHT have very powerful engine and all components are metallic category ,some of wooden also, which help to understand uses of feature like appearance,material,feature tool.
In solid work creation of 3D model from surfacing to solid is great work and gives much more knowledge about software feature tools uses.
Due to modeling of yacht in solid work ,most important we understand the surfacing Feature tool uses, its application and function also.