Challenge

Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

PPriyadevi P20 Oct 2023

Create a 3 dimensional model of the residential building with a rendered view.��

AIM:

� � � To create a 3 Dimensional model of the residential building with a rendered view.

INTRODUCTION:

� � �Here using the Commands like Rec, Extrude, Subract, Shade, UCS, Materials, etc. we are creating a 3Dimensional model of the residential building in the AutoCAD.

PROCEDURE:

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: EX

EXTEND

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Path does not intersect with the bounding edge.

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Path does not intersect with the bounding edge.

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Path does not intersect with the bounding edge.

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Path does not intersect with the bounding edge.

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Path does not intersect with the bounding edge.

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]: *Cancel*

Command:

Command: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command:

** STRETCH **

Specify stretch point or [Base point/Copy/Undo/eXit]: 4.5

Command: *Cancel*

Command: F

FILLET

Current settings: Mode = TRIM, Radius = 0'-0.00"

Select first object or [Undo/Polyline/Radius/Trim/Multiple]:

Select second object or shift-select to apply corner or [Radius]:

Command: F

FILLET

Current settings: Mode = TRIM, Radius = 0'-0.00"

Select first object or [Undo/Polyline/Radius/Trim/Multiple]:

Select second object or shift-select to apply corner or [Radius]:

Command: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Specify next fence point or [Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: EX

EXTEND

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Invalid point, polygon segment is zero length.

Specify next fence point or [Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Specify next fence point or [Undo]:

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]: tr

Expects a point or Fence/Boundary edges/Crossing/mOde/Project

Select object to extend or shift-select to trim or

�[Boundary edges/Crossing/mOde/Project/Undo]:

Command: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: _u TRIM

Command: F

�FILLET

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 4'

Select object to offset or [Exit/Undo] : *Cancel*

Crossing Lasso� Press Spacebar to cycle options

Command: _.erase 1 found

Command: *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2'

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 1 found

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2'

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : *Cancel*

Command:

Command: _.erase 1 found

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: _u

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 1'

Select object to offset or [Exit/Undo] : _u

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 6

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : _u

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2'

Select object to offset or [Exit/Undo] : *Cancel*

Command: *Cancel*

Command:

Command: _.erase 1 found

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 6

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2'

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] :

Select object to offset or [Exit/Undo] : '

*Invalid selection*

Expects a point or Exit

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 1'

Select object to offset or [Exit/Undo] : *Cancel*

Command:

Command: _.erase 1 found

Command:

Command: _.erase 1 found

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 3'

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: *Cancel*

Command: Z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : a

Regenerating model.

Command: *Cancel*

Command: Z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : W

�

Specify first corner: Specify opposite corner:

Command: UNION

Select objects: Specify opposite corner: 2 found

Select objects: Specify opposite corner: 3 found, 5 total

Select objects: Specify opposite corner: 4 found (1 duplicate), 8 total

Select objects: Specify opposite corner: 2 found, 10 total

Select objects: Specify opposite corner: 2 found, 12 total

Select objects: Specify opposite corner: 0 found

Select objects: Specify opposite corner: 4 found (1 duplicate), 15 total

Select objects: Specify opposite corner: 2 found (1 duplicate), 16 total

Select objects: Specify opposite corner: 2 found, 18 total

Select objects: Specify opposite corner: 2 found, 20 total

Select objects: Specify opposite corner: 2 found (1 duplicate), 21 total

Select objects: Specify opposite corner: 2 found (1 duplicate), 22 total

Select objects:

At least 2 solids, surfaces, or coplanar regions must be selected.

�

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: '_.-LAYER

Current layer:� "3D WINDOW MULLIONS"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

�

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command: '_.-LAYER

Current layer:� "3D DOOR"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D DOOR

�

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command: '_.-LAYER

Current layer:� "3D WINDOW FRAME"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "3D WINDOW FRAME"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command: *Cancel*

Command:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command:

Command: _.erase 2 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 3 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 2 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 2 found

Command:

Command: _.erase 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 2 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 2 found

Command: _u ERASE

Command: *Cancel*

Command:

Command: _.erase 2 found

Command:

Command: _.erase 1 found

Command:

Command: _.erase 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 2 found

Command:

Command: _.erase 1 found

Command:

Command: _.erase 1 found

Command:

Command: '_.-LAYER

Current layer:� "3D WINDOW FRAME"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WALL

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "3D WINDOW FRAME"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D DOOR

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: *Cancel*

Command:

Command: *Cancel*

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

7 loops extracted.

7 Regions created.

�

BOUNDARY created 7 regions

urrent wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]: 1 found, 3 total

Select objects to extrude or [MOde]: 1 found, 4 total

Select objects to extrude or [MOde]: Specify opposite corner: 0 found

Select objects to extrude or [MOde]: 1 found, 5 total

Select objects to extrude or [MOde]: 1 found, 6 total

Select objects to extrude or [MOde]: 1 found, 7 total

Select objects to extrude or [MOde]:

�

Specify height of extrusion or [Direction/Path/Taper angle/Expression]: 10'

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other/cUrrent] : _2d Regenerating model.

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

2 loops extracted.

2 Regions created.

BOUNDARY created 2 regions

Command: EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <10'-0.00">: 3'

Command:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: *Cancel*

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Valid hatch boundary not found.

Pick internal point: *Cancel*

Command: REG

REGION

Select objects: 1 found

Select objects:

1 loop extracted.

1 Region created.

Command: *Cancel*

Command: EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <3'-0.00">: 3'

Command: *Cancel*

Command:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: *Cancel*

Command: REG

REGION

Select objects: 1 found

Select objects:

1 loop extracted.

1 Region created.

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <-3'-0.00">: 3'

Command: *Cancel*

Command:

Specify corner of window, enter a scale factor (nX or nXP), or

�

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] :

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other/cUrrent] : _2d Regenerating model.

Command: PLAN

Enter an option [Current ucs/Ucs/World] : W

Regenerating model.

Command: Regenerating model.

�Regenerating model.

Automatic save to C:\Users\91637\AppData\Local\Temp\3D Model Residential Building_1_18662_9c9e1721.sv$ ...

Command:

Command: Regenerating model.

Command: UCS

Current ucs name:� *NO NAME*

Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] : W

Command:� Regenerating model.

Command: Regenerating model.

REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: D

Specify length for rectangles <10'-0.00">: 3'

Specify width for rectangles <10'-0.00">: 4'

Specify other corner point or [Area/Dimensions/Rotation]:

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 4

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2

Select object to offset or [Exit/Undo] : *Cancel*

Command: L

LINE

Specify first point:

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 2

Select object to offset or [Exit/Undo] : *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 1 found

Command:

** STRETCH **

Specify stretch point or [Base point/Copy/Undo/eXit]: 1

Command:

** STRETCH **

Specify stretch point or [Base point/Copy/Undo/eXit]: 1

Command: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: F

FILLET

Current settings: Mode = TRIM, Radius = 0'-0.00"

Select first object or [Undo/Polyline/Radius/Trim/Multiple]:

Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel*

Command: TR

TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

�[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Crossing Lasso� Press Spacebar to cycle options

Command: *Cancel*

Crossing Lasso� Press Spacebar to cycle options

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel*

Command:

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: UN

UNITS

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: UNI

UNION

Select objects: 1 found

Select objects: 1 found, 2 total

Select objects: Specify opposite corner: 0 found

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects:

At least 2 solids, surfaces, or coplanar regions must be selected.

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: UNI

UNION

Select objects: 1 found

Select objects: 1 found, 2 total

Select objects:

At least 2 solids, surfaces, or coplanar regions must be selected.

Command:

Command: *Cancel*

Command: JOIN

Select source object or multiple objects to join at once: 1 found

Select objects to join: 1 found, 2 total

Select objects to join:

1 segment joined into 1 polyline

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: JOIN

Select source object or multiple objects to join at once: 1 found

Select objects to join: 1 found, 2 total

Select objects to join:

1 segment joined into 1 polyline

�

Command: *Cancel*

Current layer:� "3D WALL"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "3D WALL"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WINDOW MULLIONS

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "3D WALL"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: *Cancel*

Command:

Command: *Cancel*

Command: EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <0'-4.00">: 2

Command:

Command: _u EXTRUDE

Command: EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: *Cancel*

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]: *Cancel*

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <0'-2.00">:

Command: *Cancel*

Command: EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <5'-6.40">:

Automatic save to C:\Users\91637\AppData\Local\Temp\3D Model Residential Building_1_18662_9c9e1721.sv$ ...

Command:

Command: *Cancel*

Command:

Command: '_.-LAYER

Current layer:� "3D WALL"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WINDOW FRAME

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command: *Cancel*

Command: SUBTRACT

Select solids, surfaces, and regions to subtract from ..

Select objects: 1 found

Select objects:

Select solids, surfaces, and regions to subtract ..

Select objects: 1 found

Select objects:

Command: *Cancel*

Command: SUBTRACT

Select solids, surfaces, and regions to subtract from ..

Select objects: 1 found

Select objects:

Select solids, surfaces, and regions to subtract ..

Select objects: 1 found

Select objects: 1 found, 2 total

Select objects:

Command: *Cancel*

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <4'-1.86">:

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <3'-4.69">: 2

Command: SUBTRACT

Select solids, surfaces, and regions to subtract from ..

Select objects: 1 found

Select objects:

Select solids, surfaces, and regions to subtract ..

Select objects: 1 found

Select objects: 1 found, 2 total

Select objects:

Command: *Cancel*

Command: EXT

EXTRUDE

Current wire frame density:� ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: 1 found, 2 total

Select objects to extrude or [MOde]:

�

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <0'-2.00">: 1

Command: 3DROTATE

Current positive angle in UCS:� ANGDIR=counterclockwise� ANGBASE=0

4 found

Specify base point:

** ROTATE **

Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90

�

Command: *Cancel*

Command: MOVE

Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify second point or :

Resuming MOVE command.

Specify second point or :

Window Lasso� Press Spacebar to cycle options

Command:

Command: M

MOVE 2 found

Specify base point or [Displacement] :

Specify second point or :

Resuming MOVE command.

Specify second point or :

Resuming MOVE command.

�

Specify second point or :

Command: 3DROTATE

Current positive angle in UCS:� ANGDIR=counterclockwise� ANGBASE=0

4 found

Specify base point:

** ROTATE **

Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90

Command: *Cancel*

Command: MOVE

Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify second point or :

Resuming MOVE command.

Specify second point or :

Window Lasso� Press Spacebar to cycle options

Command:

Command: M

MOVE 2 found

Specify base point or [Displacement] :

Specify second point or :

Resuming MOVE command.

Specify second point or :

Resuming MOVE command.

Specify second point or :

Command: *Cancel*

Command:

Command: *Cancel*

Command:

Command: CO

COPY

Crossing Lasso� Press Spacebar to cycle options0 found

Select objects: Specify opposite corner: 4 found

Select objects:

Current settings:� Copy mode = Multiple

Specify base point or [Displacement/mOde] :

Specify second point or [Array] :

Resuming COPY command.

Specify second point or [Array] :

Resuming COPY command.

Specify second point or [Array] :

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Specify second point or [Array/Exit/Undo] : *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command:

Command: 3DROTATE

Current positive angle in UCS:� ANGDIR=counterclockwise� ANGBASE=0

4 found

Specify base point:

** ROTATE **

Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: *Cancel*

Command:

** ROTATE **

Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]:

Command: *Cancel*

Command:

Crossing Lasso� Press Spacebar to cycle options

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: CO

COPY 4 found

Current settings:� Copy mode = Multiple

Specify base point or [Displacement/mOde] :

Resuming COPY command.

Specify base point or [Displacement/mOde] :

Specify second point or [Array] :

Resuming COPY command.

Specify second point or [Array] :

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Resuming COPY command.

Specify second point or [Array/Exit/Undo] :

Specify second point or [Array/Exit/Undo] : *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 4 found

Command:

Command: V

VIEW

Command: *Cancel*

Command: V

�

VIEW

Command: '_.-LAYER

Current layer:� "3D WALL"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _OFF

Enter name list of layer(s) to turn off or

Really want layer "3D WALL" (the CURRENT layer) off? _Yes

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: REG

REGION

Select objects: *Cancel*

None found.

Automatic save to C:\Users\91637\AppData\Local\Temp\3D Model Residential Building_1_18662_9c9e1721.sv$ ...

Command:

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Pick internal point: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: *Cancel*

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Pick internal point: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: REG

REGION

Select objects: Specify opposite corner: *Cancel*

0 found

Select objects: *Cancel*

None found.

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: UCS

Current ucs name:� *NO NAME*

Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] :�

Specify point on X-axis or :�

Specify point on the XY plane or :

Command: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command:

** Z AXIS DIRECTION **

Specify a point on Z axis:

Command: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command:

** Z AXIS DIRECTION **

Specify a point on Z axis:

Command: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: *Cancel*

Command: UCS

Current ucs name:� *NO NAME*

Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] : W

Command: *Cancel*

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command: *Cancel*

Command: 3DPOLY

Specify start point of polyline:

Resuming 3DPOLY command.

Specify start point of polyline:

Specify endpoint of line or [Undo]:

Specify endpoint of line or [Close/Undo]:

Specify endpoint of line or [Close/Undo]: *Cancel*

Command: B

BLOCK

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

4 loops extracted.

4 Regions created.

BOUNDARY created 4 regions

Command: *Cancel*

Command:

Command: '_.-LAYER

Current layer:� "FLOOR"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WALL

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "FLOOR"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WINDOW FRAME

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "FLOOR"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WINDOW GLASS

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

Command:

Command: '_.-LAYER

Current layer:� "FLOOR"

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]: _ON

Enter name list of layer(s) to turn on: =3D WINDOW MULLIONS

Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile/Xref]:

�

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: UCS

Current ucs name:� *WORLD*

Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] : w

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command:

Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Command: BO

BOUNDARY

Pick internal point: Selecting everything...

Selecting everything visible...

Analyzing the selected data...

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

Analyzing internal islands...

Pick internal point:

3 loops extracted.

3 Regions created.

�

BOUNDARY created 3 regions

Command: _u COPYCLIP GROUP

Command: _u INTELLIZOOM INTELLIZOOM

Command: _u PLAN Regenerating model.

Command: _u INTELLIZOOM

Command: _u ERASE

Command: _u INTELLIZOOM

Command: _u VSCURRENT

Command: _u INTELLIZOOM INTELLIZOOM

Command: _u COPY

Command: _u INTELLIZOOM GROUP menu item menu item

Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM

Command: _u INTELLIZOOM GROUP menu item

Command: _u INTELLIZOOM

Command: _u '.VIEWCUBEACTION

Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM

Command: _u EXTRUDE

Command:

Command: *Cancel*

Command:

Command: *Cancel*

Command:

Command: *Cancel*

Command:

Command: _copyclip 1 found

Command:

Command: _pasteclip Specify insertion point:

Command: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Cannot offset that object.

Select object to offset or [Exit/Undo] : *Cancel*

Command: PLAN

Enter an option [Current ucs/Ucs/World] : W

Command: *Cancel*

Command:

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other/cUrrent] : _2d Regenerating model.

Command: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Cannot offset that object.

Select object to offset or [Exit/Undo] :

Cannot offset that object.

Select object to offset or [Exit/Undo] : *Cancel*

Command: UCS

Current ucs name:� *WORLD*

Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] : w

Command: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Cannot offset that object.

Select object to offset or [Exit/Undo] : *Cancel*

Command: *Cancel*

Command: EXPLODE

Crossing Lasso� Press Spacebar to cycle options1 found

Select objects:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: *Cancel*

Command: O

OFFSET

Current settings: Erase source=No� Layer=Source� OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] :

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] :

Select object to offset or [Exit/Undo] : 9

*Invalid selection*

Expects a point or Exit

Select object to offset or [Exit/Undo] : _u

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] :

Specify through point or [Exit/Multiple/Undo] : 9

Select object to offset or [Exit/Undo] : *Cancel*

**** System Variable Changed ****

1 of the monitored system variables has changed from the preferred value. Use SYSVARMONITOR command to view changes.

Command: F

FILLET

Current settings: Mode = TRIM, Radius = 0'-0.00"

Select first object or [Undo/Polyline/Radius/Trim/Multiple]: M