Challenge

Project 1 - V&V SW Analysis - I

Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested .Every other thing to be included in the test plan can be hypothetical.

Test Plan:

if(owner long press the power button)

{

open the company logo at the centre;

}

else if (custumer press the power button)

{

open the apps in grid;

}

else if (owner power on the phone )

{

shows dictionary icon on second position at bottom;

}

else if(owner click on call the phone icon)

{

search bar appears in chronological order;

}

else if (owner long press power on buttton)

{

display good bye and gets switched off;

}

else if (owners phone font)

{

always in callibari with size of 12;

}

else if (customer requirement touch responsive)

{

reflects on touch;

}

else (customer requirement no hard buttons)

{

touch screen sensitive;

}

if (owner long press the power button)

{

open the company logo at center;

}

else if (customer press power button)

{

open the app in grid;

}

else if (owner power on the phone )

{

shows call the phone icon on first position at bottom;

}

else if (owner power on the phone )

{

shows the dictionary icon on second position at bottom;

}

else if (owner click the phone icon on call)

{

contacts appears in chronological order;

}

else if(owner click dictionary icon)

{

search bar appears at centre;

}

else if (owner long press power on button)

{

display good- bye and gets switched off;

}

else if (owner phone font)

{

always in callibari with size 12;

}

else if (customer requirement touch responsive)

{

reflects on touch;

}

else (customer requirment no hard button)

{

touch screen sensitive;

}

ID test plan SW Requirement specification Type JIRA ID Maturity Release valid until release Implemantation status verification method function sw_component responsible team SIL Test Severity Test procedure Expected result Actual result
ID-1 if(owner long press the power button) if the signal_A is 1 AND flag is1.then set signal_Bto 1 .else set signal_Bto 0 requirement ABC_1234 proposed Relesase_A101 Relesase_A105 Implemented SWT Function A SW_A Your Team SIL_High High SET signal_A to 1 and flag B to 0 Signal_B is SET to 0 Signal_B is SET to 0
{ SET signal_A to 1 and flag B to 1 Signal_B is SET to 0 Signal_B is SET to 0
open the company logo at the centre; SET signal_A to 1 and flag B to 1 Signal_B is SET to 1 Signal_B is SET to 1
}
else if (custumer press the power button)
{
open the apps in grid;
}
else if (owner power on the phone )
{
shows dictionary icon on second position at bottom;
}
else if(owner click on call the phone icon)
{
search bar appears in chronological order;
}
else if (owner long press power on buttton)
{
display good bye and gets switched off;
}
else if (owners phone font)
{
always in callibari with size of 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirement no hard buttons)
{
touch screen sensitive;
}
if (owner long press the power button)
{
open the company logo at center;
}
else if (customer press power button)
{
open the app in grid;
}
else if (owner power on the phone )
{
shows call the phone icon on first position at bottom;
}
else if (owner power on the phone )
{
shows the dictionary icon on second position at bottom;
}
else if (owner click the phone icon on call)
{
contacts appears in chronological order;
}
else if(owner click dictionary icon)
{
search bar appears at centre;
}
else if (owner long press power on button)
{
display good- bye and gets switched off;
}
else if (owner phone font)
{
always in callibari with size 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirment no hard button)
{
touch screen sensitive;
}
ID-2 if(owner long press the power button) if the signal_A is 1 ANDflag is 1 AND signal_C IS 1. then set signal_B to 1 .else set signal _b to 0 requirement ABC_1235 proposed Relesase_A101 Relesase_A105 Implemented SWT Function A SW_A Your Team SIL_High High SET signal_A to 1 and flag B to 0 Signal_B is SET to 0 Signal_B is SET to 0
{ SET signal_A to 1 and flag B to 1 Signal_B is SET to 0 Signal_B is SET to 0
open the company logo at the centre; SET signal_A to 1 and flag B to 1 Signal_B is SET to 1 Signal_B is SET to 1
}
else if (custumer press the power button)
{
open the apps in grid;
}
else if (owner power on the phone )
{
shows dictionary icon on second position at bottom;
}
else if(owner click on call the phone icon)
{
search bar appears in chronological order;
}
else if (owner long press power on buttton)
{
display good bye and gets switched off;
}
else if (owners phone font)
{
always in callibari with size of 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirement no hard buttons)
{
touch screen sensitive;
}
if (owner long press the power button)
{
open the company logo at center;
}
else if (customer press power button)
{
open the app in grid;
}
else if (owner power on the phone )
{
shows call the phone icon on first position at bottom;
}
else if (owner power on the phone )
{
shows the dictionary icon on second position at bottom;
}
else if (owner click the phone icon on call)
{
contacts appears in chronological order;
}
else if(owner click dictionary icon)
{
search bar appears at centre;
}
else if (owner long press power on button)
{
display good- bye and gets switched off;
}
else if (owner phone font)
{
always in callibari with size 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirment no hard button)
{
touch screen sensitive;
}
ID-3 if(owner long press the power button) if the signal_C is 1 or flag b is 1 or signal_c is 1 ,then set signal_B to1 else set signal _Bto 0 requirement ABC_1236 proposed Relesase_A101 Relesase_A105 Implemented SWT Function A SW_A Your Team SIL_High High SET signal_A to 1 and flag B to 0 Signal_B is SET to 0 Signal_B is SET to 0
{ SET signal_A to 1 and flag B to 1 Signal_B is SET to 0 Signal_B is SET to 0
open the company logo at the centre; SET signal_A to 1 and flag B to 1 Signal_B is SET to 1 Signal_B is SET to 1
}
else if (custumer press the power button)
{
open the apps in grid;
}
else if (owner power on the phone )
{
shows dictionary icon on second position at bottom;
}
else if(owner click on call the phone icon)
{
search bar appears in chronological order;
}
else if (owner long press power on buttton)
{
display good bye and gets switched off;
}
else if (owners phone font)
{
always in callibari with size of 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirement no hard buttons)
{
touch screen sensitive;
}
if (owner long press the power button)
{
open the company logo at center;
}
else if (customer press power button)
{
open the app in grid;
}
else if (owner power on the phone )
{
shows call the phone icon on first position at bottom;
}
else if (owner power on the phone )
{
shows the dictionary icon on second position at bottom;
}
else if (owner click the phone icon on call)
{
contacts appears in chronological order;
}
else if(owner click dictionary icon)
{
search bar appears at centre;
}
else if (owner long press power on button)
{
display good- bye and gets switched off;
}
else if (owner phone font)
{
always in callibari with size 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirment no hard button)
{
touch screen sensitive;
}
ID-4 if(owner long press the power button) if the pressure _valve is 'ON'then sensor monitor _pressure is 'VALID',else if pressure_valveis transistioning from ONto OFF then sensor monitor _pressure is 'HOLD',else monitor_pressure is INVALID requirement ABC_1237 proposed Relesase_A101 Relesase_A105 Implemented SWT Function A SW_A Your Team SIL_High High SET signal_A to 1 and flag B to 0 Signal_B is SET to 0 Signal_B is SET to 0
{ SET signal_A to 1 and flag B to 1 Signal_B is SET to 0 Signal_B is SET to 0
open the company logo at the centre; SET signal_A to 1 and flag B to 1 Signal_B is SET to 1 Signal_B is SET to 1
}
else if (custumer press the power button)
{
open the apps in grid;
}
else if (owner power on the phone )
{
shows dictionary icon on second position at bottom;
}
else if(owner click on call the phone icon)
{
search bar appears in chronological order;
}
else if (owner long press power on buttton)
{
display good bye and gets switched off;
}
else if (owners phone font)
{
always in callibari with size of 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirement no hard buttons)
{
touch screen sensitive;
}
if (owner long press the power button)
{
open the company logo at center;
}
else if (customer press power button)
{
open the app in grid;
}
else if (owner power on the phone )
{
shows call the phone icon on first position at bottom;
}
else if (owner power on the phone )
{
shows the dictionary icon on second position at bottom;
}
else if (owner click the phone icon on call)
{
contacts appears in chronological order;
}
else if(owner click dictionary icon)
{
search bar appears at centre;
}
else if (owner long press power on button)
{
display good- bye and gets switched off;
}
else if (owner phone font)
{
always in callibari with size 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirment no hard button)
{
touch screen sensitive;
}
ID-5 if(owner long press the power button) the system works if and only if all the sensors are connected , the environmental effect ,malfunction of sensor may have on the system requirement ABC_1237 proposed Relesase_A101 Relesase_A105 Implemented SWT Function A SW_A Your Team SIL_High High SET signal_A to 1 and flag B to 0 Signal_B is SET to 0 Signal_B is SET to 0
{ SET signal_A to 1 and flag B to 1 Signal_B is SET to 0 Signal_B is SET to 0
open the company logo at the centre; SET signal_A to 1 and flag B to 1 Signal_B is SET to 1 Signal_B is SET to 1
}
else if (custumer press the power button)
{
open the apps in grid;
}
else if (owner power on the phone )
{
shows dictionary icon on second position at bottom;
}
else if(owner click on call the phone icon)
{
search bar appears in chronological order;
}
else if (owner long press power on buttton)
{
display good bye and gets switched off;
}
else if (owners phone font)
{
always in callibari with size of 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirement no hard buttons)
{
touch screen sensitive;
}
if (owner long press the power button)
{
open the company logo at center;
}
else if (customer press power button)
{
open the app in grid;
}
else if (owner power on the phone )
{
shows call the phone icon on first position at bottom;
}
else if (owner power on the phone )
{
shows the dictionary icon on second position at bottom;
}
else if (owner click the phone icon on call)
{
contacts appears in chronological order;
}
else if(owner click dictionary icon)
{
search bar appears at centre;
}
else if (owner long press power on button)
{
display good- bye and gets switched off;
}
else if (owner phone font)
{
always in callibari with size 12;
}
else if (customer requirement touch responsive)
{
reflects on touch;
}
else (customer requirment no hard button)
{
touch screen sensitive;
}
Your portfolio, next

Ship work like this
in your own course.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.