Project 1 - Parsing NASA thermodynamic data

AIM:- To design a Roof of the car from the given styling surface with consideration of all engineering aspects which are draft analysis for DFM, heat distortion, and snow load prediction to justify roof curvature. INTRODUCTION:- An automobile roof or car top is the portion of an automobile that…

AIM:-To write code in MATLAB that can solve Rankine Cycle and make plots for it. OBJECTIVE:- To calculate the performance of a steam turbine engine. To plot the T-S and H-S diagram of a Rankine cycle. INTRODUCTION:- The Rankine cycle is the fundamental operating cycle of all power plants where an operating fluid is continuously…

AIM:- Write a code in Matlab to parse the NASA thermodynamic data file and then calculate the thermodynamic properties of various gas species. OBJECTIVE:-  Write a function that extracts the 14 coefficients and calculates the enthalpy, entropy, and specific heats for all the species in the data file.  Calculate…

AIM:-  Write a code in MATLAB to optimize the stalagmite function and find the global maxima of the function. Explain the concept of genetic algorithm in your own words and also explain the syntax for ga in MATLAB in your report. INTRODUCTION:- Genetic Algorithms(GAs) are adaptive heuristic search…

AIM:- Design a Back door of the car using a Class A surface. INTRODUCTION:-                A Door is a hinged part that is used for entry and exit of the vehicles. A backdoor is one of the types of doors of the vehicle which is located next to the passenger seat and provides access to the luggage compartment. In most cars,…

AIM:- To simulate the transient behavior of a simple pendulum and to create an animation on its motion on MATLAB. OBJECTIVE:-  To write a program that solves the second-order ODE corresponding to the motion of a simple pendulum and to plot its angular displacement and angular velocity with respect to time.   …

AIM:- To simulate Forward Kinematic of a 2R robotic arm. OBJECTIVE:- Write the code to simulate forward kinematic of a 2R robotic arm. Show the animetion of the moving robotic arm from the program. INTRODUCTION:- A robotic arm, sometimes referred to as an industrial robot, is often described as a ‘mechanical’…

AIM:- To calculate the section modulus of the given hood panel for analyzing its strength and also optimizing the design to see differences in the bending strength of the hood.  Section modulus Section modulus is defined as the ratio of moment of inertia and distance from the Neutral axis to the extreme fiber.…

 AIM:-  Study the Wheel Arch area and prove whether the car will pass the standards or not using European regulations. OBJECTIVE:- Calculate the Wheel Arc area and prove whether the car will pass the standards or not using European standards. INTRODUCTION:- The wheel arch is the area where the wheel is covered…

AIM:- Design a front fender from the given skin data and the master section provided with Drip mounting, A-pillar, Sill, Bumper, C mounting, and Splash mountings Intriduction:-A fender is the part of a car that protects and frames its wheels and keeps mud from splashing it. Most modern vehicles have fenders on…

AIM:- Design the Hood outer panel, inner panel, and the necessary reinforcements by following the Master section mentioned with the design parameter explained in the videos. Submit an assembly of the Hood inner panel, outer panel, latch, hinge, and reinforcements. INTRODUCTION:- A car hood is the metal part that…

UNDERBODY COATING Under-body Coating is a thixotropic corrosion preventive that provides long-term resistance against corrosion and abrasion even under difficult conditions. When the solvent has evaporated, a tough, elastic, waxy protective film remains on the sheet metal, giving a high degree of protection. A car's underbody…

Benchmarking:- Benchmarking is the competitive edge that allows organizations to adapt, grow, and thrive through change. Benchmarking is the process of measuring key business metrics and practices and comparing them within a business area or against a competitor, industry, or other company around the world to understand…

AIM:- To design and develop vehicles interior door trim with given Class-A surface along with master section. Also, Create the Side Attachment feature as per design rules. OBJECTIVE:- Create thickened part using master section for reference Create the mounting features as per design guidelines in the industry and with…

AIM:- Create the boss and Dog House for the Centre console coin holder considering the design rules mentioned in the video.  Screw boss Design rule of screw boss Draft  - 0.5 degrees on walls of boss Thickness -  Typically 40%* of the nominal wall at the base. Height to Diameter Ratio -  3:1 Radii…

AIM:-To create the rib for the Centre console coin holder considering the design rules. Bellow is the images of different views of the Center console coin holder. Design rules to create ribs The distance between the 2 ribs should be 2 times the thickness (2t) The rib thickness (w) should be 0.4 times the thickness (0.4t)…

AIM:-To create 2 assemblies according to the content covered in the course videos. You will be provided with 2D diagrams of the components and you will have to first create the individual part files and then create a complete assembly of those part files in the assembly workbench. After creating the assembly make use of…

AIM:- To design a B pillar with the given master section to follow the design criteria and thickness and thereby develop a close volume part. INTRODUCTION:- The vertical roof support structure is located between the front and rear doors of a typical vehicle. It corresponds with the A-pillar located on either side of the…

AIM:- To create the door applique with engineering features through the given Class-A surface.Create the heat stake and locator by considering the design rule for the door applique.OBJECTIVE:-Create the door applique plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A…

AIM:- To create Core and cavity block of a switch bezel component. To create a  plastic part there are two major components core and cavity. The core has the impression and the cavity have the depression. Design rules:- The proper draft should be given to the part so that the part can be ejected from the core and…

AIM:- Create the Coin Holder Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. OBJECTIVE:- Create Tooling Axis. Perform a draft analysis…

AIM:- Create the Door Armrest component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. OBJECTIVE:- Create Tooling Axis Perform a draft analysis on…

AIM:- Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  OBJECTIVE:- Create Tooling Axis Perform a draft analysis…

AIM:- Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  OBJECTIVE:- Create Tooling Axis Perform a draft analysis…

DRAFT ANALYSIS FOR FAN COVER AIM:- To create the tooling axis for the given Fan cover model meeting the requirements of the draft angle and perform the Draft analysis on the model. 1) CHECK THE CONNECTIVITY OF CLASS A SURFACE First, select the boundary command and check the connectivity of the surface. We can also check…