Project 1

AIM:

The aim of this project is to route the wiring harness to the engine assembly by following the harness assembly rules and packaging rules.

IMAGES OF THE ELECTRICAL HARNESS:

The connectors in the assembly should be electrically defined and it is placed in the appropriated position on the engine surface.

After positioning the connectors place the supporting mounting clips in the engine to acheive the proper routing without fouling of the bundle with the surrounding parts.

After achieving ths route the harness in the geometric bundle , make sure the bundle segment do not clash with the surronding parts.

Flatten the geometric bundle after finalised the geometric bundle , make sure for the bundle connectivity in the wiring harness.

flattening of wiring:

SYNCHRONISING DATA:

RESULT:

The engine reference is used for the wiring harness and the corresponding geometric bundle is flattened accordingly.The same file is attached below.