Introduction to National Building Code and Steps in a Construction project

Question 1) Open an architectural template.Using the manage tab set project base point & project shared coordinate for project? Answer: Aim: To open architectural template, use manage tab to set project base point & project shared coordinate for project. Introduction: Revit gives different way to collaborate with…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? Answer: Building codes are standards that provide guidelines for the construction of structures like residential, institutional educational, commercial, assembly and storage spaces, or even hazardous buildings.  These standards…

Question 1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Answer: Aim:  To model a Ceiling from the architecture tab above the walls at the first-floor level. Introduction:  A ceiling is an overhead…

Question 1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created…

Question 1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Answer:  Aim: To learn what is BIM and to summarize benefit over 2D tools.  Introduction: Building Information Modelling (BIM) gives real-time information about our project and it helps Architectural,…

1) From the file menu, create a new project(structural/Architectural/Construction template) and name the project appropriately. Answer:  Aim: Create a new project and name the project appropriately Introduction: Revit is Autodesk product and is building information modeling software for architects, landscape architects,…

Question 1) Answer:  Aim: To Create a 3D rendered model for a residential building in Autocad Introduction: The main objective of this project is to understand about to create a plan in 2D then convert it into 3D using AUTOCAD 3D modeling and then apply materials and rendering. AutoCAD is primarily used for generating…

QUESTION 1) Answer: Aim:- To create a 3D isometric view of the given building with plan and elevation. Introduction:-  An isometric drawing is a 3D representation of an object, room, building or design on a 2D surface. One of the defining characteristics of an isometric drawing,…

Question 1) Answer: Aim: Create a 3D Furniture element as shown in figure. Introduction: In a given challenge create a 3D furniture element using 3D modeling. 3D modeling in AutoCAD includes 3D solids, surfaces, meshes, and wireframe objects. Types of 3D Models: Several types of 3D modeling are available in AutoCAD.…

Question 1) Answer: Aim:     To Creating the layout of floor plan and section of challenge 7 project using Autocad Introduction:  The main objective of this project is to understand about the viewports in Auto CAD. There are two types of viewports in AutoCAD. Model space viewports  and layout…

Question 1) Answer: Aim: To create a layout of kitchen and provide hatch pattern as shown in challenge question Introduction: Two kitchen plans are given one below contour plan and another above contour plan.Below contour plan consists of fridge, micro oven, cupboards, hob, dishwashers etc, Above contour plan consists…

Question 1) Create the template as shown in figures.Take the size of title size of the title block as per industry standard or  ....... Aim: To create templates Custom1_titleblock and Custom2_titleblock using attributes and block command from Autocad Software. Introduction:  AutoCAD-AutoCAD stands for computer-Aided…

Project 1 : Creating an architectural plan for the provided plot size and develop relevant basic structural drawings. Design and draft a layout of a residential building with the following details. a) Plot Size: 60'x20'(18.3mx6m) b) Orientation-Facing East c)Develop the following: 1. Architectural Drawing(Floor plan ,…

Question 1) Answer: Aim: To create floor plan, section AA and section BB as shown in figure Introduction: The floor plan given is of an apartment bulding with same plan for 1st, 2nd and 3rd floors. Each floor consists of four houses, three two-bedroom flat and one single bedroom flat each with kitchen and living room.…

After 2nd question i also 4th then 3rd   Question 1) Answer: Aim: To create the plan, elevation and section views of a wardrobe as shown in fig Introduction: The drawing consists of a plan showing from the top view and front elevation along with the car-case elevation showing all the inner elements of the wardrobe,…

Question 1) Answer- Aim:  To Create a column schedule as shown in drawing by using autocad Introduction: We have to create a column schedule given in challenge by using various command with assuming dimension. The purpose of column schedule is a schedule which gives details of column will be collected in construction…

DRAWING-1 Answer:  Aim: To create a Residence layout, toilet and utility room plan using Autocad Introduction: The main objective of this challege is to get in touch with various tools in Autocad like rectangle, poly lines, circle arc modification tools likw copy, move, offset, mirror, trim, fillet .These tools will…

                   Drafting of various geometries using chamfer, Fillet tool in Autocad Drawing-1 Aim: To determine drafting of various geometric using Chamfer, fillet tool in autocad Introduction:  Autocad offers various tools to perform different tasks. The various…

DIAGRAM 1:Cross-section of load bearing wall over spread footing AIM: To create a cross-section of load bearing wall over spread footing using AutoCAD. Introduction: The cross-section of load bearing wall over spread footing using autoCAD is created by lines and rectangle command. The procedure and result are written after…

Creation of geometries by Coordinate system methods using AutoCad Answer:  Aim-To create given gemetries using different coordinate system method with help of line & circle tools. Geometry of P-1 & P-2 draw using all ordinate system method & each of geometry are drawn using different coordinate system…

Sketch a G+1 Floor residential Plan according to vastu shastra, and list down the names of the structural drawing required to be provided to the site for construction. Answer:- Aim & Introduction: Aim is to sketch a G+1 floor residential plan according to vaastu shastra & list down the structural drawing required…

Concrete Mix Design For M35 grade concrete with fly ash Concrete Mix Design: Concrete is complex material & has the right mix of constituent concrete which if not done properly will have adverse affect on properties of concrete hence right propertion of all the constituents is important, it is process of selecting…