Identification of Cracks

  Cracks may occur in different components of a building due to • External applied force in a different component of the building is greater than that of its resisting capacity. • Poor quality of material used Construction is not carried out by relevant drawing, prescribed job specifications, or work-man-like…

1. AIM: To use the structural project file developed by us in the week 6 to 8 to export the Revite Architecture and structure model to Nvisworks Cache file. TOOLS USED : File Export save NWC Navis work PROCEDURE: STEP-1: Open the Revite and open the file which you have saved in the week 6 to 8 and go to file then export…

  Aim: 1. To create a set of sinusoidal points, a curve and a surface out of the curve using dynamo. Introduction: Dynamo is an open source visual programming language for Revit, written by designers and construction professionals. Its a programminglanguage that allows you to type lines of code; while also creating…

1)  Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box           b. To create similar doors and windows in a floor plan layout         …

1) What are HVAC systems? Why are they essential in the modeling of buildings ANS:-Aim:- to explain aboout HVAC system and its importance in building modelling INTRODUCTION:- HVAC is heating,ventilation and cooling system It is provided to create comfort in the building with minimum usage of electricity It is provided…

       1.  ANS :-From the given structures i want to make a muti-unit REsidential unit.      2)Assume reasonable assumptions for geographic and location details for your project modeling. Based on assumptions and type of structure selected identify the modeling requirements from…

1 AIM:- Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project PROCEDURE:- to create project shared coordinates OPEN Architectural tab   STEP-2:- FIRST save the file with appropriate name Go to collabration and enable collabration within your…

1. A model building code organistaion is a set of building codes that are developed and maintained by  standard organistaion.This standard organistaion operates independently of the jurisdiction or area in which building code standards are being developed . NAtional building code of india is a comprehensive building…

  1. AIM:- TO model a ceiling from the architecture tab above the walls at first floor level INtroduction:- The creation of ceiling within revit is a very similar process to that of floors and roofs ie you can let Revit do most of the work Where u want the boundaries to be ,Or youncan enter the sketch mode and litrelly…

  AIM:- to create a floor plan and need to apply the materials and thickness using property browser INTRODUCTION:-1. building information modelling is a process supported by various tools,technologies and contracts involving the generation and management of digital represenations of physical and functional characterstic…

1. building information modelling is a process supported by various tools,technologies and contracts involving the generation and management of digital represenations of physical and functional characterstic of places.Bim are computer files which can be extracted ,exchanged or networked to support decision making regarding…

1.From the file menu,create a new project (structural/architectural) and name the project appropriately.\   AIM:-create a new project (structural/architectural) and name the project appropriately. INTRODUCTION:- revit is  an autodesk product and is a building information modelling software for architects,landscape…

Aim:- To create a 3d isometric view of given building with plan and elevation COMMANDS USED:- extrude OFFSET UCS box union subtract move 3d orbit loft sweep cone  region procedure:- open the autocad ,click on workspace switching and change it to 3d modelling and click on the home buttonnear the view cube create a…

AIM:- to create 3d model and view  COMMANDS USED:- extrude OFFSET UCS box union subtract move 3d orbit loft sweep cone  region procedure:- open the autocad ,click on workspace switching and change it to 3d modelling and click on the home buttonnear the view cube create a box by clicking from the toolbar or box…

AIM:-To create layout of plan and section a of challenge 7 using template tutotrial  march .dwt. use the mv command to create the view port used in the ATTEDIT to edit the information  Commands used:-Line POLYGOn rectangle Circle Ellipse ERAse Copy MIrror Offset Extend Array Move SCale PROCEDURE:- ARchitectural…

  Aim:-to create kitchen layout and also use proper dimension techniques to dimension the layout  INTRODUCTION:- Kitchen layout is the most important part of designing your perfect kitchen .Its the layout that will determine how you cook,how you eat and how you socialise Command used:- LIMITS COMMANDLINE COMMAND…

  AIM:-to create templates title block and need to save it as a block with names INTRODUCTION:-to create templates title block and need to save it as a block with names CUSTOM1_titleblock and CUSTOM2_titleblock,respectively.BY using autocad PROCEDURE:- creating of custom_1 titleblock take rec command for rectangle…

AIM:-Design and draft a layout of a residential building  a. Plot size :60'*20' b. ORientation- Facing east c.Develop the following :- Architectural drawing (floor plan, Elevation,And section) Structural drawing(Column,Beam ,Footing plan) PRocedure:- ARchitectural drawing:- (floor plan)   Draw a rectangle of…

AIM:-to draw plan elevation and section of the house in AUto cad Commands used:-Line POLYGOn rectangle Circle Ellipse ERAse Copy MIrror Offset Extend Array Move SCale Procedure:-Open auto cad and enter UN in the command box and select type decimal and set precision as zero Select X line command and draw horizontal line…

   AIM:-To draw the elevation and details of a wardrobe as shown in figure. after sketching u need to provide the dimensions and text with use of layers. Procedure:-Units are set to mm Limits and limmax are also set up in command line type rec>2800,2600 Use offset  Offset from top of dimensions 12 and…

AIM:- To create a column schedule as shown in the figure INtroduction:-Creating a column schedule with the help of lines.Also insert text with the help of Dtext command orsingle line text  Using font name: roman.shx ;height 8" and justify left Procedure:- In the command prompt type line to create tables In the command…

AIM:-To sketch a layout of residence Commman used:- UN LIMITS Z XLINE OFFSET TRIM CIRCLE ERASE PROCEDURE:- Open the autocad Type the UN in the command prompt and select enginearing and precision 0'-0" Type limits in the command and specially left corner (0'-0",0'-0") Now the uupper right corner say as (100'-0.0",100'-0.0")…

 Aim;-To create geometery by using autocad Introduction:-Constructing various geometeries using fillet and chamfer commands in auto cad Commands:-Use of line and circle Procedure:- Create a line using command L and the coordinate are 0,0  and 3,0 Relative coordinates are 2.12<135 and the other coordinates…

  1 Aim:- To draw Cross section of load bearing wall over spread footing Introduction:-The cross section of load bearing wall over spread footing using auto cad is created by lines. The proceddure and result should be written after creating the cross section of isolated footing Procedure:-Open the auto cad software…

Aim:- Creating the geometries from P1 to P2 using coordinate system methods Introduction:-We need to take line commands to draw the sketches and also can use the circle command to draw  the sketces Procedure:- By using relative rectangular coordinate Choose the line tool Line specify first point 2,1 Specify next point@…

To sketch a G+1 floor residential floor plan according to vaastu shastra and list down the names of structural drawings required to be provided to site for construction   Procedure:- Sketch of the ground floor and first floor as per vaastu shastra     Dimensions :- Living room: 5*5m Master bed room:4*4m…

1. Aim:-Concrete mix design for M35 grade of concrete with fly ash Introduction:- For grades above M20 design mix is adopted Mix design is the most rational and intelluctual approach for selection of different materials with their proportions in suitable amount Design mix is more scientific than nominal mix It is used…